Engineering calculators
Clearly referenced engineering calculators: every formula, value and source right underneath.
What’s new
10 changes in the last 7 days · Atom feed9 changes in 4 tools, 1 new
- Colour palettes newPalettes from one base colour in Oklab (distinct series, even hues or shades), sequential and diverging ramps
- Symbols713 more drawing symbols on the electrical and building side
- SymbolsDrawing annotation: ISO 13715 edge symbols (basic, +, −, ± with size) and ISO 6411 centre-hole indications (required, not permitted)
- SymbolsDrawing symbols: new set Equipment symbols
- Threads and tap drillsCopy values: click or tap any number to copy it
- SymbolsP&ID: 67 more ISO 10628-2:2012 symbols with item and registration numbers
- SymbolsP&ID: 72 more symbols. ISA-5.1-2009
- SymbolsDrawing symbols: new set Mechanisms and machine elements
- Surface finishConversions and the symbol, spot by spot
1 change in 1 tool
- Symbols193 more drawing symbols (947 in 18 sets)
Earlier (7 more days)
1 change in 1 tool
- Threads and tap drillsDark theme: the finder, the tables, the tags and the axial section follow the site's Light, Dark or Auto choice
85 changes in 73 tools
- Bolt patternReport export: load names are escaped in the report's loads list, so a name with &, < or a quote no longer breaks the PNG and PDF export
- Bolt pattern, 3DThe bolt-type pill in the bolt table is a little wider, so “A 3/8-16” is no longer cut at its last character
- Hydraulic cylinderFormula steps: a unit with a superscript 3 (in³) closes its \text{} group and sets ^{3} in math mode
- Hydraulic cylinderFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Weld groupLoad names are escaped in the drawing's labels, so a name with &, < or a quote no longer breaks the PNG and PDF export
- Stress concentrationExport: the cross-drilled hole preset no longer hangs the PDF and PNG export
- Stress concentrationFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Pipe and hose pressure dropFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- ShaftReport export: “P < 10” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)
- Bend allowance and K-factorFormula steps: the K-factor band (r ≤ 3t) inside \text{} is set in math
- Flat platesFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- ShaftFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Outrigger pads and crane matsSection drawing: the ground pressure pill sits beside the pressure block when it does not fit inside
- Ground anchors and soil nailsPNG and PDF export fixed
- Base plate and anchor boltsFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Hertz contact stressPNG and PDF export fixed
- Sling anglesReport export: “β > 60°” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)
- Fits and tolerancesFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Pipe supports and spanFormula steps: a unit with a micro sign or a superscript 3 closes its \text{} group and sets \mu or ^{3} in math mode
- Slope stabilityPNG and PDF export fixed
- Ground anchors and soil nailsThe 0.1 % proof stress can be cleared again
- Vibration isolation & dampersFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Lead and ball screwsFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Four-bar linkagePNG and PDF export fixed
- Fatigue: Goodman and HaighFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Shear tab and end plateThe steel select has a narrower label beside it, so “S275 (fy 275, fu 430 MPa)” fits whole on a phone
- Orifices and nozzlesReport export: “S < 5 D” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)
- Pipe supports and spanFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Water hammerPNG and PDF export fixed
- Ground anchors and soil nailsWith no 0.1 % proof stress entered, the drawing footer shows P_t0,1k as "not set"
- Lead and ball screwsScrew materials are listed by standard and grade number without the chemical name, so the stainless grades fit the select on a phone
- CamsPNG and PDF export fixed
- Four-bar linkageFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Clutches and brakesPNG and PDF export fixed
- Sheet and plate: gauges and tolerancesStainless steel type B reads “Ni > 20, Mo > 2 or N > 0.11 %”, short enough to show whole in the select
- PCB trace and via currentPNG and PDF export fixed
- Relief scenariosFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Casing designReport export: section names are escaped in the report's results column, so a name with & or < no longer breaks the PNG and PDF export
- Haul truck fleet productivityThe road panel's loaded and empty segment speeds read the result of the previous road after a preset with a different number of segments
- Aluminium member designFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Adhesive lap jointsThe shear and peel peak pills stay inside the drawing on a phone
- Spreader and lifting beamsFormula steps: the bending-range note (Lb ≤ Lp) inside \text{} sets ≤ in math
- Hydraulic pump and motorFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Orifices and nozzlesFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Retaining wall stabilityFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Soil classification and compactionPNG and PDF export fixed
- Weirs and flumesReport export: “H < 0.5 Y” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)
- Heat exchangerPNG and PDF export fixed
- Room heat loadPlan: the room's dimension pills are placed before the heat-flow pills, which now also try beside the arrow nearer the wall
- Natural frequencyFormula steps: the harmonic (1×) inside \text{} is set in math
- Moment end plateFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Motor sizingThe material select has a narrower label beside it, so “Aluminium · 0.1012 lb/in³” fits whole on a phone
- Timing beltFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- CamsFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Worm gearsFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Process capability and SPCPNG and PDF export fixed for the Gauge R&R example
- Packed and fluidised bedFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Pinch analysisA stream name with & or a quote no longer shows escaped twice in the CP pill's accessible name
- Traverse adjustmentPlan on a phone: a wider margin left and right, each station's angle placed round its own corner first (outside), the names inside
- Railway track geometryReport export: “80 < V” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)
- Bench blast designPNG and PDF export fixed
- Active and passive filtersReport export: an & or a quote in the case name is no longer escaped twice in the report's summary line
- Standard atmosphere and airspeedsFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Relief scenariosDrawing: the wetted-area and fire pills search the whole drawing for a free spot before settling on a line
- Ship hydrostatics and intact stabilityFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Outdoor sound propagationReport export: source names are escaped in the report's results column, so a name with & or < no longer breaks the PNG and PDF export
- Room acousticsReport export: receiver names are escaped in the report's results column (a name with & broke the PNG and PDF export)
- Rotor balancingFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Portable gantry craneFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Sheet pile wallFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Pipe network solverPNG and PDF export fixed
- Gravity sewer and detentionReport export: manhole names are escaped in the report's results column, so a name with & or < no longer breaks the PNG and PDF export
- Transient conductionPNG and PDF export fixed
- Fins and radiationPNG and PDF export fixed
- Speeds and feedsPNG and PDF export fixed
- Motor current and powerFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Transformer sizing and loadingExport: the PDF, PNG and Copy buttons now work (they had no handlers)
- Indoor lightingProfile chart: the total and direct labels keep clear of the luminaire ticks, total above its curve and direct below its own
- Binary distillationPNG and PDF export fixed
- Gas compressor powerFormula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}
- Timber connectionsReport export: “d > 6 mm” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)
- Flexible pavement designReport export: layer names are escaped in the report's results column, so a name with & or < no longer breaks the PNG and PDF export
- Horizontal and vertical road curvesReport export: “S<L” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)
- Active and passive filtersFormula steps: kΩ is set as \text{k}\Omega
- Roof and sidewall wedgesPNG and PDF export fixed
324 changes in 175 tools, 109 new
- Surface finish newA turned, ground, plateau-honed, sine or triangle profile, magnified and drawn as the drawing input
- Aluminium member design newAluminium members to EN 1999-1-1:2007+A1:2009 with the section drawn to scale and the heat-affected zones of its welds shaded
- Portable gantry crane newPortable A-frame gantry crane drawn to scale in side elevation and end view
- Retaining wall stability newCantilever and gravity retaining walls drawn to scale with backfill, surcharge and water
- Slope stability newCircular slips in layered ground with a phreatic line and a surcharge strip
- Ground anchors and soil nails newA cut held by prestressed ground anchors or soil nails in section to scale (drag each row's depth, the start of its bond and its end)
- Sheet pile wall newEmbedded steel sheet pile walls in section to scale with soil layers, water on both sides, surcharge and a line load (DM-7.02 Fig. 11)
- Soil classification and compaction newSoil classification by USCS (symbols and Lindeburg's descriptions, Terzaghi, Peck & Mesri's plasticity chart) and AASHTO M 145 with the group index
- Weirs and flumes newWeirs and flumes drawn to scale
- Pipe network solver newA water network drawn in plan as the input
- Gravity sewer and detention newA sewer run in long profile (drag inverts and ground, click a pill to type a size or level)
- Transient conduction newPlane wall, long cylinder, sphere and semi-infinite solid in section, coloured by the computed temperature at the time shown
- Fins and radiation newFins (straight rectangular, triangular and parabolic, pins, pointed pins, annular) and arrays to scale, coloured by the temperature along them
- Room heat load newA room in plan with four walls (outside, unheated space, another room, the ground), windows, ceiling and floor, turned to any of eight orientations
- Moment end plate newBolted moment end plates between a beam and a column flange, drawn to scale with the plate's face beside them
- Process capability and SPC newProcess capability and SPC
- Transformer sizing and loading newA distribution or power transformer through a daily load cycle drawn as the input
- Indoor lighting newA room in plan to scale with its luminaire grid and the maintained illuminance as a banded heat map from a point-by-point calculation
- Binary distillation newBinary distillation by McCabe–Thiele (constant molar overflow, total condenser, partial reboiler), drawn as the input
- Packed and fluidised bed newA column in section to scale with its bed
- Gas compressor power newA compressor train drawn stage by stage with its intercoolers, shaft and driver (drag the end of the train for more stages)
- Pinch analysis newHeat exchanger network targets by the problem table algorithm (Linnhoff and Flower) as set out in the CRC Handbook of Thermal Engineering §4.11
- Timber connections newDowel-type timber connections to EN 1995-1-1 Section 8
- Traverse adjustment newClosed traverse adjustment drawn from the adjusted coordinates, with each station's correction magnified and an inset of the closure at the start
- Flexible pavement design newNew flexible pavements by the AASHTO 1993 Guide
- Horizontal and vertical road curves newA road curve in plan to scale and its vertical curve in profile, both the input
- Railway track geometry newA railway curve in plan to scale (tangents, clothoid transitions, arc) beside the track in section with its cant and the forces on the train
- Bench blast design newA surface bench blast in plan with its firing times and in section to scale
- PCB trace and via current newThe board in section to scale with the trace, the reference plane and a via (drag the width, the plane, the board and the drill)
- Active and passive filters newButterworth, Chebyshev (any ripple) and Bessel low-pass and high-pass filters of order 1 to 10 from their poles
- Standard atmosphere and airspeeds newThe ISO 2533 / ICAO standard atmosphere from −2 to 80 km drawn against altitude (drag the altitude and the day's temperature offset)
- Relief scenarios newFour API 521 (2014) contingencies sized for one valve
- Ship hydrostatics and intact stability newHydrostatics and intact stability of a prismatic hull (box, round bilge, hard chine) drawn heeled in the water to scale
- Outdoor sound propagation newOutdoor sound propagation by ISO 9613-2:1996 in octave bands 63 Hz to 8 kHz
- Casing design newA casing string of up to four sections from the API sizes of Bull 5C2 Table 1, rated to API TR 5C3 / ISO 10400
- Room acoustics newReverberation time per octave band (125 Hz to 4 kHz) of a box room by Sabine and by Eyring, with the 4mV air term from ISO 9613-1
- Haul truck fleet productivity newThe haul road in profile with named segments
- Roof and sidewall wedges newThe tetrahedral wedge three joint sets cut from a tunnel's roof or wall (block theory), its volume, weight and failure mode, the falling
- Rotor balancing newISO 21940-11:2016 permissible residual unbalance from the grade (Formulae 6 and 7)
- Flange joint, EN 1591-1 newA gasketed flange joint to EN 1591-1 (read in EN 1591-1:2001+A1:2009 with the EN 13555 parameters), two weld necks or a weld neck on a blind flange
- Fracture assessment (FAD) newCrack-like flaws in plates and cylinders
- Fatigue crack growth newParis-law fatigue crack growth from the initial flaw to the FAD or through the wall, depth and length grown together
- Corrosion newISO 9223 dose-response first-year rates for steel, zinc, copper and aluminium and the corrosivity category, ISO 9224 loss over the life
- Rigging load distribution newA rigid load on two to four slings in 3-D
- Pipe expansion and flexibility newAn L-bend, Z-bend, expansion loop, three-plane bend or bellows run between two anchors in isometric, with draggable legs
- Two-phase pressure drop newTwo-phase gas–liquid pressure drop in a straight pipe by Friedel, Chisholm (B coefficient)
- Shallow foundation bearing capacity newShallow foundations (strip, pad, circular) in section with the computed failure mechanism
- Pile axial capacity newDriven, H-, tapered, bored and CFA piles through layered ground drawn to scale with the shaft friction and base pressure
- Consolidation settlement newFinal primary settlement of a clay under a fill from e0, Cc, Cr and OCR, its progress by Terzaghi's exact series
- Construction dewatering newDeep wells round a pit in plan to scale (drag the wells, the pit and its corner) with drawdown contours from the wells superposed
- Pump station wet well newA pump station wet well in section to scale with its pumps, inlet and levels
- Open channel flow newOpen channel flow in rectangular, trapezoidal, triangular and part-full circular sections drawn to scale
- Stormwater runoff and culvert newPeak runoff by the rational method (Lindeburg CERM Eq. 20.36) from up to eight named sub-catchments with App
- Duct sizing and fan newA duct run in plan from the plant and fan to every terminal, lengths to scale and draggable
- Steam tables newWater and steam from any two of p, T, h, s, u, v and x by IAPWS-IF97 (R7-97(2012))
- Refrigeration cycle newThe single-stage vapour-compression cycle on a computed log p–h diagram for R134a (Tillner-Roth & Baehr 1994), R32 (Tillner-Roth & Yokozeki 1997)
- Crane runway girder newSimply supported crane runway girders under one end carriage, drawn to scale
- Creep and stress rupture newLarson-Miller master curves of API 579-1 Annex 10B (WRC 541 and API 530 6th ed.) for 25 alloys with a draggable operating point, time to rupture
- Shaft coupling selection newShaft coupling selection with the driver, the coupling and the driven machine drawn in elevation and the measured misalignment exaggerated
- Gearbox thermal capacity newGearbox thermal capacity with the unit drawn to scale in elevation and from the side
- Welding preheat and heat input newHeat input Q = k U I / v with EN 1011-1 Table 1 efficiencies (or a stick electrode's run-out length, EN 1011-2 Table C.4), CE, CET and Pcm
- Punching, blanking and deep drawing newPunching and blanking drawn in section with the part in plan (round, rectangle, slot or any outline, with holes in the same stroke)
- Injection moulding newInjection moulding with the part drawn in plan (plate, box, round lid or L) with its gate
- Weibull analysis newWeibull analysis of times to failure with suspensions after IEC 61649:2008. Johnson's adjusted ranks and Benard's median ranks, rank regression
- Reliability block diagram newReliability block diagrams after IEC 61078:2016 for non-repaired, independent blocks
- Battery and UPS sizing newStationary battery sized for a duty cycle drawn as the input
- Power factor correction newCapacitor bank kvar and steps from the power triangle drawn to scale (drag cos φ, the target, the load and the steps)
- Earth fault loop and disconnection newAutomatic disconnection to IEC 60364-4-41:2005+AMD1:2017 in TN and TT systems
- Electric heat tracing newElectric heat tracing of an insulated pipe drawn in section to scale (drag the insulation, the wind, the maintain and ambient temperatures)
- Short-circuit currents newShort-circuit currents to IEC 60909-0:2016 on a radial network
- Motor starting and generator sizing newThe voltage dip of starting induction motors from a network (fault level), a transformer (IEC 60909-0 (7) to (9)) or a generating set
- Cathodic protection newGalvanic anode cathodic protection of a submerged structure (named zones in seawater or mud, bare or coated) or a buried pipeline
- Busbar sizing newRectangular Cu and Al bars, 1 to 4 per phase, rated by DIN 43671/43670
- Li-ion battery pack newSeries count from the nominal voltage, parallel count from the usable energy and from each cell's continuous current at the power (P = I(U − I R))
- Engineering economics newA cash-flow table of named items
- Tunnelling-induced settlement newThe Gaussian settlement trough over a bored tunnel from the volume loss with O'Reilly and New's trough width for clays and sands or your own K
- Convergence–confinement newThe convergence–confinement method for a deep circular tunnel
- Ideal reactor sizing newIdeal CSTR, PFR, constant-volume batch and N equal CSTRs in series for one reaction (order n in A, A + B, or reversible A ⇌ B)
- Reinforced concrete beam and slab newA reinforced concrete beam (rectangle or T, with top bars and links) or one-way slab strip drawn to scale beside its strain and stress block
- Punching shear newPunching shear at interior, edge and corner columns (rectangular or round) in plan with the control perimeters drawn as checked
- Timber beam and column newA solid timber (EN 338 C14 to C40) or glulam (EN 14080 GL22 to GL32, h and c) member, simply supported or cantilevered
- Coordinate transformations newOne point in every system at once
- Earthwork volumes and mass haul newA road's long section over its mass-haul (Brückner) diagram on one station axis
- Signalised intersection timing newThe intersection in plan with each lane group's movements in its phase colour beside the phase diagram (drag the phase boundaries and the cycle)
- Psychrometrics newMoist air from any two of dry bulb, wet bulb, dew point, relative humidity, humidity ratio and enthalpy
- Combustion newCombustion of gases by volume and liquids or solids by ultimate analysis to ASME PTC 4-2013 5-11
- Mine and tunnel ventilation newA heading with a forcing duct, or an airway with its fan, drawn in long section and to-scale cross-section
- Rock mass classification newRMR89 (Bieniawski Table 4 with the joint-condition guidelines and Table F orientation), the Q-system of NGI's handbook
- Pillar stability newRoom-and-pillar and rib pillars in plan to scale, tributary-area stress, pillar strength by Obert–Duvall, Bieniawski, Salamon–Munro
- Concrete column interaction newA reinforced concrete column, rectangular or round, with bars in a layout or placed by hand, beside the column in elevation
- Tank venting newNormal and emergency venting of atmospheric and low-pressure storage tanks to API Std 2000, 7th ed. (2014), read in the owner's library
- Heat sink and junction temperature newA straight-fin heat sink in end view to scale with the fins shaded by their computed temperature and the device under it
- PID tuning and loop response newA first-order-plus-dead-time model from a step test drawn as the input (drag the 28.3 and 63.2 % points, type the model, or paste the trend data)
- Tank volume newVolume at any level of horizontal and vertical tanks with flat, conical, ellipsoidal (any depth, 2:1 by default), hemispherical
- Jet fire and flare radiation newA flare stack or a hole in equipment drawn to scale in elevation and plan with the radiation bands and contours computed from the model chosen
- Compressible flow newCompressible flow of a perfect gas in seven views
- Solar PV string sizing and yield newPV strings sized from the coldest morning to the hottest afternoon
- Wind turbine energy yield newAnnual energy and capacity factor of a wind turbine from the mean wind carried to the hub by the power or log law
- Wind loads newA building in section along the wind and in plan, drawn to scale with its pressure zones (drag the eaves, the ridge, the depth and the width)
- Snow loads newRoofs in elevation with the snow load drawn on them (drag the width, the ridge, the step, the higher roof and the parapet)
- Fire load and steel temperature newThe compartment in section beside the steel member (drag the ceiling, the wall, the window sill and the protection)
- Gamma radiation shielding newPoint-kernel air-kerma rate from Co-60, Cs-137, Ir-192, Se-75, Am-241 and Tc-99m
- Well control kill sheet newKill mud, ICP, FCP, fracture density from a leak-off test, MAASP, capacities, strokes and times
- Small hydropower newA small hydro scheme in elevation with a draggable intake and powerhouse
- Stack plume dispersion newThe EPA ISC3 short-term Gaussian point-source model
- Ground-source heat pump boreholes newA ground-source heat pump borehole field drawn in section, plan and bore section with the depth, spacing and shank offset dragged on it
- Mine hoist and rope newA drum (single, double or with a counterweight) or friction (Koepe) hoist drawn over its shaft to scale beside the wheel or drum enlarged
- Belt conveyor newA belt conveyor's profile
- Machine vibration severity newZones A to D for bearing-housing vibration by ISO 10816-3:2009
- Lifting lugPin diagram: the peak value's alternative spots no longer count the first spot as an obstacle
- Lifting lugBase section torsion now uses Shigley Eq. (3-40), τ = (T/bc²)(3 + 1.8c/b)
- Bolt patternM42 bearing face diameter corrected to 59.95 mm, the ISO 4014:2011 Table 1 value for product grade B
- Bolt patternTorque wrench with estimated friction now uses αA 2.0, the upper end of VDI 2230-1 Table A8 (1.6 to 2.0, friction class B), as the torque page does
- Thread engagementStripping chart: on a phone the bolt line's label reads "breaks · 21,285 lbf" so it fits beside the lines
- Bolt pattern, 3DM42 bearing face diameter corrected to 59.95 mm, the ISO 4014:2011 Table 1 value for product grade B
- Thread engagementSources: the HELICOIL catalogue and the Crosby eye bolt sheet, both hosted by distributors, are now marked secondary
- Bolt pattern, 3DTorque wrench with estimated friction now uses αA 2.0, the upper end of VDI 2230-1 Table A8 (1.6 to 2.0, friction class B), as the torque page does
- MaterialsThe detail card fades out at the edge it scrolls past
- MaterialsImperial view: column units such as BTU/(h·ft·°F) wrap after the slash instead of ending in an ellipsis
- Hydraulic cylinderThe input panel fades out at the edge it scrolls past, so a mounting cut at the bottom reads as more below
- Materials4130, 4140, 4340 and 6150 gain a quenched-and-tempered variant (tempered at 540 °C) from ASM Handbook Vol
- Hydraulic cylinderBuckling chart: rod labels are measured at their tabular width, so "Ø1.37" no longer touches the operating line
- MaterialsShear modulus re-sourced or derived where it disagreed with E and ν
- Weld groupThe input panel fades out at the edge it scrolls past, so a field cut at the bottom reads as more below
- MaterialsCast aluminium EN AC-42100 and EN AC-43000 read from EN 1706:2010
- Weld groupSources: the AISC 360-16 citation no longer links a copy on a university site
- Stress concentrationImperial view: the dimension pills ("d 1.18", "r 0.118") keep 8 px either side of the text
- MaterialsShear modulus G now follows E and ν (G = E/[2(1+ν)]) for 51CrV4, 37Cr4, E295, S355J0 and the 13 % Cr stainless grades
- Hardness converterShore card cites ISO 48-4:2018 and ISO 48-9:2018, which replaced ISO 7619-1 and ISO 18898
- Weld groupEurocode long lap joints
- Stress concentrationSources: an unused lecture-notes copy of Peterson (1974) removed
- Section propertiesThe library chart is drawn again at the new width when the window is resized (its labels kept their old size before)
- MaterialsMore sources read from the standards
- Stress concentrationSources: the hole bending and ellipse fits now cite Pilkey's Formulas (Table 6-1) and Roark 7th ed. (Table 17.1)
- MaterialsSources read from the standards instead of web copies
- Stress concentrationCross hole in torsion checked against Peterson Chart 4.108 and left as it is
- Bolt torque chartSources: nut factor ranges now cite the Standard Handbook of Machine Design, 3rd ed., Table 23.5
- Pipe and hose pressure dropFriction sources upgraded to White, Fluid Mechanics 8th ed.
- Stress concentrationMore charts read from their curves
- Pipe and hose pressure dropOil density against temperature now follows API MPMS 11.1:2004 for lubricating oils
- Stress concentrationOpposite U-notches in tension, and stepped shafts in tension and bending, now read Kt from the curves of Peterson 4th ed. Charts 2.4, 3.4 and 3.10
- Stress concentrationPeterson's Stress Concentration Factors 4th ed. (2020) is now the primary source for the U-notch, groove and shoulder-fillet fits
- Bend allowance and K-factorFlat pattern: a tag takes the first free row (a jog's two close bend tags overlapped on the second)
- Friction coefficientsThe table fades out at the bottom while more rows follow, inside its card
- Flat platesAn opened link stays the address until you change the sheet, written through the shared link helper as in the other tools
- ShaftShoulder and groove Kt now come from the curves of Peterson Charts 3.4, 3.10, 2.19, 2.41 and 2.47, as digitised on the stress concentration page
- Bend allowance and K-factorPress-brake tonnage checked against ASM Handbook Vol
- Retaining ringsBeveled inch rings NA12 (external) and NA13 (internal) from ASME B18.27.4 with the end play each takes up, and interlocking NA15 from B18.27.5
- Weld group, 3DSources: the AISC 360-16 citation no longer links a copy on a university site
- Bearing lifeSources audit: Palmgren's roller deflection constant 3.84·10⁻⁵ (read only in a secondary source) is gone
- Friction coefficientsSources: the Shigley nut factors K (0.30, 0.20, 0.18, 0.16) are now cited to Table 8-15 of the 9th edition, read in the book, instead of AMESweb
- Pressure vesselThe input panel fades out at the edge it scrolls past, so a field cut at the bottom reads as more below
- Outrigger pads and crane matsAISC 360-16 no longer links a third-party copy
- Base plate and anchor boltsImperial view: value pills such as "M 11.1 kip·ft" keep 8 px either side of the text (widths measured with the page's tabular figures)
- Flat platesAnnular plates clamped outside with a free hole (cases 9 and 10) now cite Roark 7th ed. Table 11.2 cases 1e and 2e
- Hertz contact stressAGMA contact stress numbers are cited to Shigley 9th ed. Fig. 14-5 and Table 14-6, read in the book, instead of lecture slides
- ShaftSources: the Marin surface and reliability factors, the size factor, the Neuber constant
- Retaining ringsMore inch types from ASME B18.27.2 to .4
- Weld group, 3DPublished checks 7 to 28
- BeamAISC 360-16 no longer links a third-party copy
- Column bucklingAISC 360-16 no longer links a third-party copy
- Bearing lifeA custom deep groove ball bearing can be marked as light series (diameter series 8, 9, 0 or 1), which puts its axial load limit at 0.25 C0 as SKF says
- Galvanic corrosion and coatingsCadmium plating now follows SAE AMS-QQ-P-416G (2022) read in the owner's library instead of a copy of the cancelled QQ-P-416F
- Friction coefficientsEN 1090-2:2008 slip factors (classes A to D) read in the standard itself, 8.4 Table 18
- Pressure vesselSources: the VIII-1 shell, head, flat-head and joint-efficiency formulas now cite ASME BPVC VIII-1 (UG-27, UG-32, UG-34, Appendix 1-4
- Frame and trussThe input panel fades out at the edge it scrolls past, so a note cut at the bottom reads as more below
- Spur and helical gearsThe input panel fades out at the edge it scrolls past, so a field cut at the bottom reads as more below
- Sling anglesThe last check's thumbnail is no longer cut by the edge of the check table
- Fits and tolerancesThe input panel fades out at the edge it scrolls past, so the fit chips cut at the bottom read as more below
- Outrigger pads and crane matsCrane guides: maximum outrigger pad loads, float sizes and spreads of four Grove rough-terrain cranes
- Slope stabilityCompact report: the card now shows this tool's own key numbers (numbers only) and its standard
- Vibration isolation & dampersImperial view: the response chart's left margin fits its widest tick ("0.015" in) clear of the axis title at 375 px
- Base plate and anchor boltsCorrectness audit: the ACI 318 Chapter 17 checks (breakout, pullout, blowout, shear, shear lug) take f′c as at most 10,000 psi (70 MPa)
- ShaftTable 7-1 end-mill keyseat estimate corrected to Kt 2.14 as Shigley prints it (was 2.2)
- Retaining ringsInch E-rings: ASME B18.27.1 NA3, all 35 sizes including the S and Y variants that share a shaft
- Weld group, 3DEurocode long lap joints
- SpringsThe check table fits a 375 px phone without scrolling sideways
- Bearing lifeDeep groove ball bearings in the light series (60.., 618.., 619.., 160..) and with a bore up to 12 mm now have their axial load limit at 0.25 C0
- Galvanic corrosion and coatingsSources: ISO 9223:2012 (Table 2, Annex C) and ISO 9224:2012
- Unit converterShort ton, long ton and hp(metric) are understood as written (also "hp (metric)" and "metric hp")
- Frame and trussLoad pills measure their figures at the tabular width they are drawn in, so long imperial values ("G 1.12 · Q 10.1 kip") keep 14 px sides
- Spur and helical gearsFace load factor: the commercial-enclosed constant C of Table 14-9 is now −0.930(10⁻⁴) as Shigley 9th ed. prints it
- SymbolsElectronics
- Sling anglesMetric wire rope slings now rated from EN 13414-1 Table 4
- Fatigue: Goodman and HaighSources: the IIW recommendations no longer link a copy on a third-party site
- Shear tab and end plateAISC single plates now check the support's base metal beside the plate's welds
- Outrigger pads and crane matsA crane that tips at the slew angle now fails the verdict
- Pipe supports and spanSupport labels are placed again once the web font has loaded, so the full label
- Water hammerHead scale: the axis room follows the widest tick, so "1,000" ft is no longer cut at the left edge of a phone
- Slope stabilitySources audit: EN 1997-1 Annex A factors (A.3, A.4, A.14) checked against the EU JRC report EUR 26227 EN (2013), cited on the page
- Ground anchors and soil nailsCompact report: the card now shows this tool's own key numbers (numbers only) and its standard
- Vibration isolation & dampersRubber mounts are checked at the stiff end of Harris' dynamic ÷ static range
- Lead and ball screwsSources: Shigley Example 8-1, Eqs
- Four-bar linkageA force on the coupler point now also counts as bending
- Clutches and brakesBand brake: the name block is placed before the drum's diameter pill, so a wide imperial diameter moves aside instead of sitting under the name
- PCB trace and via currentPhone: the ΔT pill is left out of the drawing when no clear spot is left near the trace
- Casing designPhone, imperial: the well pills read "shoe 11 kft", "TD 15 kft", "level 5.75 kft" and sit beside their markers, between the well
- Haul truck fleet productivityCompact report: the card now shows this tool's own key numbers and its standard or method
- Retaining ringsInch rings: ASME B18.27.1 basic external NA1 (1/8 to 10 in) and internal NA2 (1/4 to 10 in) with their grooves, tolerances, thrust loads
- Accumulator sizingThe bladder 25 % precharge rule (API 16D 5.15.3.5) is checked on the precharge at the lowest temperature, as Annex D Example 1 does
- SpringsSources: the Shigley Chapter 10 wire constants, moduli, allowable-stress percentages, eq
- Wire ropeEN 12385-2 designation letters confirmed in the standard
- Valve Cv and KvThe water viscosity fit is checked against White, Fluid Mechanics 8th ed. Table A.1 (within 2 % from 0 to 100 °C)
- Pipe expansion and flexibilityCompact report: the card now shows this tool's own key numbers and its standard or method
- Pile axial capacityCompact report: the card now shows this tool's own key numbers and its standard or method
- Construction dewateringCompact report: the card now shows this tool's own key numbers and its standard or method
- Frame and trussAISC 360-16 no longer links a third-party copy
- Anchors in concreteCompact report: the card gives the governing check as action of resistance, the tension and shear margins, and tension · shear
- Crane runway girderCompact report: the card now shows this tool's own key numbers (span with the girder, design moment instead of the crane class) and its standard
- Spur and helical gearsLife factors now follow each material's own curve in ISO 6336-2 Table 2 and ISO 6336-3 Table 1
- Tolerance stack-upThe IT grade table is checked value by value
- Weld costSuggested submerged-arc deposition from Blodgett's Fig. 1 (electrode 5/64 to 7/32 in, current, DC+ or DC-), one click to use it
- Cathodic protectionSources audit: the Al-Zn-In and zinc anode densities are now cited to ASM Handbook Vol
- Pipe schedulesOn a phone the schedule picker fades out at the edge with more schedules
- Convergence–confinementCompact report: the card now shows this tool's own key numbers (unsupported strain with its class) and its method
- Signalised intersection timingCompact report: the card now shows this tool's own key numbers and its standard or method
- Pillar stabilityImperial view: the stress chart's left margin fits its widest tick ("10,000" psi) clear of the axis title
- Wind turbine energy yieldPhone: the hub speed and air density pills are left out of the drawing when no clear spot is left
- Snow loadsCompact report: the card now shows this tool's own key numbers and its standard or method
- Small hydropowerCompact report: the card now shows this tool's own key numbers (the turbine type with the power) and its method
- Ground-source heat pump boreholesCompact report: the card now shows this tool's own key numbers and its method (VDI 4640 only when it is set)
- Mine hoist and ropeCompact report: the card now shows this tool's own key numbers and its standard or method
- SymbolsDrawing symbols: 674 engineering symbols drawn as clean SVG in one style, each tagged with its standard and clause
- Surface finishImperial view: the chart pills ("limit 11.8 µin", the material-ratio level) keep 8 px either side of the text
- Sling anglesWebbing-sling colours are now cited to EN 1492-1 §5.11 Table 3, read in the standard
- Aluminium member designSection dimensions: a last spot past either end of the line when there is no room beside it (phone, imperial depth sat on its line)
- Shear tab and end plateAudit fixes: 1 1/8 in. bolts now take standard holes of d + 1/8 in
- Adhesive lap jointsFactor of safety now at least 1 (in the panel and in old links)
- Spreader and lifting beamsA member check this tool can't do (a slender element, a box beyond Lr, a web too thin for the shear rule) now sets the verdict to n/a and says why
- Hydraulic pump and motorAudit fix: the motor's nominal and peak pressures are port pressures
- Orifices and nozzlesGas viscosities for the Reynolds number from White, Fluid Mechanics 8th ed., Table A.4
- Pipe supports and spanBeam theory cites Logan, A First Course in the Finite Element Method, 4th ed. (§4.1 Eq. 4.1.14, §4.4) and Roark 7th ed. Table 8.1 instead of Wikipedia
- Water hammerSources audit: concrete's 20.6 GPa re-read in Nakayama & Boucher §14.4
- Retaining wall stabilitySources audit: EN 1997-1 Annex A factors checked against the EU JRC report EUR 26227 EN (2013)
- Slope stabilityHeights ×2 on phones (a To scale / Heights ×2 switch over the drawing, marked in the section)
- Ground anchors and soil nailsSources audit: FHWA GEC 4 and GEC 7 read in the public FHWA editions and cited by clause
- Soil classification and compactionCompact report: the card now gives the USCS group as the verdict with AASHTO, then fines, LL/PI, Proctor and the minimum margin
- Weirs and flumesSubmerged large Parshall flumes
- Heat exchangerA target outlet on the wrong side of its own inlet
- Room heat loadCompact report: the card now shows this tool's own key numbers and its standard or method
- Moment end plateΑ (Figure 6.11) is now read from the chart itself, digitised for this tool (λ to ±0.004), instead of closed-form curve expressions
- Motor sizingThe input panel fades out at the edge it scrolls past, so a field cut at the bottom reads as more below
- Timing beltA drive with fewer than 2 teeth in mesh on the small pulley is no longer rated
- CamsThe 3-4-5 polynomial is no longer labelled as having infinite jerk
- Four-bar linkageCoupler buckling uses the J
- Worm gearsThreads pill: a last spot between the figure's edge and the worm's stub
- Clutches and brakesSources audit: Khurmi & Gupta Table 24.1 and Shigley 9th Table 16-3 and Eqs
- Process capability and SPCCompact report: the card now shows this tool's own key numbers and its standard or method
- Packed and fluidised bedCompact report: the card now shows this tool's own key numbers and its standard or method
- Pinch analysisImperial charts: heat-flow ticks in Btu/h read 10M, 20M (k/M, the unit in the axis title) on the composite curves
- Traverse adjustmentCompact report: the card now shows this tool's own key numbers and its standard or method
- Railway track geometryCompact report: the card now shows this tool's own key numbers and its standard or method
- Bench blast designSources audit: the Langefors–Kihlström second opinion on the burden is held (off the page) until their formula and constants
- PCB trace and via currentSources audit: the inner-layer fit coefficients re-checked against KiCad's current source
- Standard atmosphere and airspeedsCompact report: the card now shows this tool's own key numbers and its standard or method
- Relief scenariosThe fire-zone caption gives API 521's 7.6 m in the page's units
- Ship hydrostatics and intact stabilityCompact report: the card now shows this tool's own key numbers and its standard or method
- Outdoor sound propagationCompact report: the card now shows this tool's own key numbers and its standard or method
- Casing designImperial: stress ticks in psi read 10k, 50k (unit in the axis title) on the load panels and the biaxial chart, the last tick stays inside the frame
- Room acousticsCompact report: the card now shows this tool's own key numbers and its standard or method
- Haul truck fleet productivitySources audit: the match factor is now labelled a plain ratio of the trucks' arrival rate to the loaders' rate with no external basis
- Rotor balancingCompact report: the card now shows this tool's own key numbers (permissible residual unbalance Uper and eper, no duplicate margin) and its standard
- Retaining ringsMore rings: ANSI B27.8M heavy-duty external 3DM1, reinforced E-rings 3EM1 and C-rings 3FM1 (Tables 4 to 6, Appendices A to C)
- Flange joint, EN 1591-1Ring thickness pill: two more spots further from the flange corner, clear of its handle (a long imperial value sat on the nut)
- Snap-fit jointsSources: the Bayer snap-fit guide and two maker datasheets hosted by distributors are now marked secondary
- Fracture assessment (FAD)Compact report: the card now shows this tool's own key numbers and its standard or method
- Fatigue crack growthCompact report: the card now shows this tool's own key numbers (without the law name) and its method
- SpringsSolid length of closed, unground ends on the EN basis is now (nt + 1.5) d as EN 13906-1 asks (it used Shigley's
- Standards finderEvery standard the tools cite now has an entry
- RivetsGross yield of plate 2 (the cover plates in a butt joint) is now checked too, to EN 1993-1-1 / EN 1999-1-1 6.2.3. A thin
- Pneumatic cylinder and air useThe valve flow model cites ISO 6358-1:2013
- Pump head and NPSHSuction level pill: a dimension gap that fell on the tank rim moves to the free stretch above the tank, clear of the figure's edge
- Valve Cv and KvSources audit: Kell's water density equation checked against the NIST (IAPWS-95) densities at 1 atm from 0 to 100 °C (largest deviation 0.0015 %)
- Pipe expansion and flexibilityGuide friction μ is now a required input with no default
- Two-phase pressure dropCompact report: the correlation name and flow pattern (text) stay off the card's key numbers
- Shallow foundation bearing capacitySources audit: EN 1997-1 Annex A factors and Annex D expressions checked against the EU JRC report EUR 26227 EN (2013), cited on the page
- Pile axial capacitySources audit: EN 1997-1 Annex A factors (A.3, A.6 to A.8, A.10) checked against the EU JRC report EUR 26227 EN (2013)
- Consolidation settlementCompact report: the card now shows this tool's own key numbers and its standard or method
- Construction dewateringSources audit: Sichardt's and Kusakin's radius of influence and Sichardt's entrance velocity √k/15 were found only in secondary copies
- Heat through wallsImperial view: on phones the temperature axis moves right so ticks such as "1,500" °F are not cut off
- Duct sizing and fanCompact report: the card now shows this tool's own key numbers and its standard or method
- Steam tablesCompact report: the card now shows this tool's own key numbers and its standard or method
- Refrigeration cycleCompact report: the card now shows this tool's own key numbers (numbers only) and its method
- Frame and trussEN 1993-1-1 6.3.3: an I or channel member bent about its strong axis now takes kzy from Annex B Table B.2 (members that can twist)
- Anchors in concreteCorrectness audit: in ACI 318 (run in inch-pound units) the rigid plate now uses moduli in psi, so anchor tensions under moment match the SI edition
- Crane runway girderSources: the EN 1991-3, EN 1993-6 and EN 1993-1-9 values were read from an unlicensed copy of the texts while the owner's copies were out of reach
- Disc springsSources section corrected
- Keys and splinesA leader pill pushed back over its level leg by the figure's edge hangs under the leader's end instead (phone, "z 24 · D 2.362 in" sat on its leader)
- Shaft coupling selectionImperial view on phones: the angular misalignment pill looks further for a clear spot instead of sitting on the machine names
- Tolerance stack-upPublished checks 13 to 26 from Drake, Dimensioning and Tolerancing Handbook (1999) Ch. 9
- Weld costRe-sourced to Blodgett, Design of Welded Structures (1966) Section 7.5
- Punching, blanking and deep drawingCompact report: the card now shows this tool's own key numbers and its standard or method
- Injection mouldingCompact report: the card now shows this tool's own key numbers and its standard or method
- Weibull analysisCompact report: the card now shows this tool's own key numbers and its standard or method
- Wire size and voltage dropConductors in parallel are now each checked for the full fault current
- Motor starting and generator sizingCompact report: the card carries at most 5 key numbers (the smallest set replaces the running load when a set is sized), numbers only
- Cathodic protectionLibrary-sourced values only
- Pipe schedulesSources sweep: walls from ASME B36.10-2022 / B36.10M-2015 and B36.19-2022 / B36.19M-2004, flange ratings from B16.5-2025
- Tunnelling-induced settlementCompact report: the card now shows this tool's own key numbers and its standard or method
- Convergence–confinementSources audit: the Vlachopoulos–Diederichs displacement profile is held (visible but disabled, not yet verified against the paper)
- Ideal reactor sizingImperial view: the Levenspiel plot's left margin fits its widest tick ("2,000" ft³) clear of the axis title
- Reinforced concrete beam and slabCompact report: the card now shows this tool's own key numbers and its standard or method
- Punching shearCompact report: the card now shows this tool's own key numbers and its standard or method
- Timber beam and columnNDS option: no NDS table is built in any more (the NDS and its Supplement are not in the owner's library)
- Coordinate transformationsCompact report: the card now shows this tool's own key numbers and its standard or method
- Signalised intersection timingSources audit: the Webster and HCM delay formulas are not yet verified
- PsychrometricsCompact report: the card now shows this tool's own key numbers and its standard or method
- CombustionCompact report: the card now shows this tool's own key numbers and its standard or method
- Rock mass classificationSources: GSI from RMR89 now by Hoek & Brown (1997), read in the paper, valid for GSI > 25
- Pillar stabilitySources: factors of safety only where a source read gives one
- Concrete column interactionCompact report: the card now shows this tool's own key numbers and its standard or method
- PID tuning and loop responseCompact report: the card now shows this tool's own key numbers and its standard or method
- Jet fire and flare radiationRadiation chart: curve labels keep clear of the curves as drawn (clamped above the plot) and of the target lines, with the full glyph height
- Solar PV string sizing and yieldCompact report: the card now shows this tool's own key numbers and its standard or method
- Wind turbine energy yieldCompact report: the card now shows this tool's own key numbers and its standard or method
- Wind loadsEN 1991-1-4 only for now
- Snow loadsEN 1991-1-3 only for now
- Fire load and steel temperatureCompact report: the card now shows this tool's own key numbers and its standard or method
- Small hydropowerNo defaults for the trash rack K, the inlet valve K or the generator efficiency
- Stack plume dispersionCompact report: the card shows the stack height for the limit only when a stack is needed, numbers only
- Ground-source heat pump boreholesNo defaults for the pulse lengths (design life, design month, peak)
- Mine hoist and ropeKoepe liner friction μ is now a required input with no default (no published design value in the library)
- Belt conveyorImperial: the take-up pill on the tension chart has more side padding
- Machine vibration severityCompact report: the card now shows this tool's own key numbers (numbers only) and its standard
1 change in 1 tool, 1 new
- Shear tab and end plate newShear tabs (single-plate, conventional and extended configurations) and shear end plates drawn to scale in elevation with a section through the bolts
103 changes in 68 tools, 42 new
- Threads and tap drills newEvery ISO 261 metric thread (coarse and fine, 352) and every ASME B1.1-2024 unified thread (UNC, UNF, UNEF, constant-pitch UN, 358), searchable
- Adhesive lap joints newSingle lap joints after Hart-Smith
- Spreader and lifting beams newSpreader bars and lifting beams on one or two lugs, drawn to scale as the input
- Outrigger pads and crane mats newCrane mats and outrigger pads that spread each float's load into the ground by Duerr's effective bearing length
- Hydraulic pump and motor newAn open hydraulic circuit drawn in ISO 1219 symbols as the input
- Orifices and nozzles newOrifice plates (corner, flange and D and D/2 tappings), ISA 1932 and long radius nozzles
- Pipe supports and span newA pipe run in elevation on hangers, rests, guides and anchors, solved as a continuous beam
- Water hammer newA reservoir, the pipe and the valve in elevation with the heads to scale, dragged and edited in the drawing
- Heat exchanger newHeat exchanger rating and sizing after Lienhard, A Heat Transfer Textbook (3rd ed.)
- Vibration isolation & dampers newA machine on isolation mounts drawn in side view and plan (drag the CG, the rotor, the mounts and the size), load on each mount
- Base plate and anchor bolts newColumn base plates under axial load, moment and shear, drawn to scale in plan and elevation with the stress block
- Motor sizing newMotor sizing for a ball screw, belt axis, rack and pinion, belt conveyor, index table, hoist, gearbox or direct drive
- Timing belt newTwo toothed pulleys and the ISO 5296 belt to scale and running
- Cams newA disc cam that turns under its follower (translating roller, flat face, knife edge or swinging roller arm), drawn as the input
- Four-bar linkage newA four-bar linkage that runs with its real kinematics
- Worm gears newThe wheel face on with the worm in axial section and the view along the worm, to scale and turning
- Clutches and brakes newDisc and multi-disc packs, cone clutches, band brakes (with or without a hand lever) and drum brakes with two internal shoes
- Speeds and feeds newSpeeds and feeds for milling (side, slot, face, ball nose), turning, drilling, reaming and tapping, with the tool drawn in the cut as the input
- Motor current and power newLine current, input power and power factor of d.c., single- and three-phase motors
- Retaining rings newRetaining rings sized and checked from the ANSI B27.7 metric tables
- Snap-fit joints newCantilever hooks (rectangle, trapezoid or ring segment, tapering in thickness and width), annular snaps and torsion snaps in plastic
- Accumulator sizing newGas-loaded accumulators (bladder, piston, diaphragm) sized to API Spec 16D Annexes B and C with real nitrogen from the NIST WebBook or an ideal gas
- Rivets newSolid steel rivets to EN 1993-1-8, aluminium rivets and plates to EN 1999-1-1 and blind rivets from ISO 15977 to 16585, in lap or butt joints
- Wire rope newA hoist drawn to scale, drum, head and crown sheaves, hook block and rope, with the rope's true cross-section
- Pump head and NPSH newTwo tanks, the suction and discharge lines and the pump in elevation with the levels to scale, dragged and edited in the drawing
- Valve Cv and Kv newControl valve sizing to IEC 60534-2-1:2011 (ISA-75.01.01) for liquids and gases
- Heat through walls newA layered wall drawn to scale, inside on the left, with the temperature through it
- Frame and truss newDraw 2D frames and trusses
- Anchors in concrete newEN 1992-4 or ACI 318-19 Ch. 17 on a plan to scale
- Disc springs newDisc spring stacks in half section on their guide between two plates, to scale
- Keys and splines newParallel keys (ISO/R 773 = DIN 6885-1 sizes, ASME B17.1 with the Section 5 depths), Woodruff keys (ASME B17.2) and involute splines
- Weld cost newCost per metre from the joint drawn in section
- Wire size and voltage drop newConductor size for DC, single- and three-phase circuits to IEC 60364-5-52
- Bolted flange newWeld neck (integral) and ring (loose) flanges to ASME VIII-1 Mandatory Appendix 2, drawn in half section with the hub, gasket
- Fastener dimensions newDimension lookup for hex bolts and screws
- Cargo securing newCargo securing to EN 12195-1:2010 for road, rail and sea areas A, B and C
- Thermal expansion and stress newThermal expansion and stress with a draggable thermometer for three cases
- Relief valve sizing newPressure relief valves sized to API 520 Part I (2014)
- Pipe insulation heat loss newThe pipe in section to scale beside the temperature through the pipe wall and up to four insulation layers against the radius
- V-belt drive newThe two pulleys and the belt to scale and running, dragged to standard diameters and belt lengths
- Roller chain newTwo sprockets in the ASME B29.1 tooth form and the roller chain to scale and running
- True position newTrue position of holes or pins from measured X, Y and size, drawn on the part with the datum reference frame
- Lifting lugShackle catalogue checked against the makers' printed pages
- Lifting lugCapacity maps refined: colours grouped by where the lug fails (colour-blind checked), mode names on the bands, switch angles as rim ticks
- Lifting lugConnector: pick a catalogue shackle
- Bolt patternBolts from a picture: paste a CAD screenshot (⌘V / Ctrl+V), drop a PDF, DXF or SVG, or use the import button
- Thread engagementPicking an example keeps the open tab, and its link reopens unchanged
- Bolt pattern, 3DBuilder, first version: a Part → Faces → Bolts → Loads → Check stepper over the drawing
- Thread engagementA563 and A194 nut strengths cited from ASTM A563-15 Table 3 and A194-17 Tables 2 and 3
- Bolt pattern, 3DExamples menu with a small isometric of each example
- Thread engagementUN classes 1A, 1B and 3B added
- Thread engagementSources upgraded to the standards themselves
- Hydraulic cylinderExamples menu with six real cylinders drawn as thumbnails (tie-rod, farm, mill-type, press, clamp, regenerative lift)
- Thread engagementISO 965-1 Table 5 now has every TD2 cell
- Hardness converterLeeb (Type D) table read from ASTM E140-12b´1 Table 10 itself
- Hardness converterDurometer mode cites the standards themselves
- MaterialsSources upgraded to the standards for cast irons (EN 1561, EN 1563), stainless bolts (ISO 3506-1), bolt steels (ISO 898-1 Table 2), C45 (EN 10083-2)
- Hardness converterDurometer mode (hardness/#shore)
- Bolt torque chartChanged torques: A574 socket head cap screws up to 1/2 in now tighten about 9 % higher in friction mode, because the yield is 153 ksi in every size
- Bolt torque chartUndo, redo and Examples in a toolbar at the top of the settings card (also on phones)
- Pipe and hose pressure dropSources upgraded: pipe walls and diameters checked row by row against ASME B36.10-2022 and B36.19-2022
- Bolt torque chartSources upgraded to the standards themselves
- Threads and tap drillsWhitworth threads from BS 84:2007
- Stress concentrationSources: the shoulder-fillet, U-notch, U-groove
- Threads and tap drillsCentralizing Acme classes 2C, 3C and 4C (ASME B1.5 section 3, Tables 13 and 15) on the Acme pages from 1/2 in
- Bend allowance and K-factorSources: the three Machinery's Handbook 90° bend formulas read in the 29th edition
- Threads and tap drillsTaper joints drawn as a true half-section
- Flat platesSources: Roark's Table 11.4 cases 1a, 1b, 4a, 5a, 6a, 8a and Table 11.2 cases 10 and 16-17 read in the 7th edition itself
- Hertz contact stressCase-depth guide on the depth chart (the depth the case should reach, dotted, with the shortfall shaded)
- Bend allowance and K-factorHoles can be named (click the name above a hole's x, y and diameter)
- Pressure vesselExternal pressure reads Table G and the material charts on log scales, as ASME PTB-4-2021 recommends
- Fastener dimensionsA 2H or DH marking now favours heavy hex nuts (A194 and A563 are heavy hex nuts)
- Threads and tap drillsPower and aerospace threads
- Fits and tolerancesSources: ANSI B4.1 checked line by line against ASME B4.1-1967 (R2020)
- Base plate and anchor boltsStage bar: the rod layout family (grid, circle, two rings, staggered, two rows, one side, custom) with the current one always selected
- ShaftKeyseats are drawn as a slot cut into the lower surface
- Bend allowance and K-factorHems and jogs: closed (0.43 t off the blank, Benson), open, teardrop and rolled hems, and jogs set by their height
- Sheet and plate: gauges and tolerancesASTM A924/A924M (hot-dip coated sheet, A653 and others) added, with narrow widths
- Weld group, 3DOn phones the weld and load sheets are cards instead of wide tables
- Bearing lifeSources: ISO 281:2007 and ISO 76:2006 read in the standards themselves (a1 Table 12, eC Table 13 and Annex A, aISO eqns 31-36, ν1 eqns 28-29, limits)
- Galvanic corrosion and coatingsRedrawn joint section: hatched half-section with matching break lines, ΔV marked at every couple
- Unit converterUnit names are shown in full (they wrap instead of ending in …)
- Pressure vesselAllowable stresses and the external-pressure tables re-typed from ASME Section II-D itself (2025, checked against 2023) in place of a reproduction
- Fastener dimensionsNord-Lock wedge-locking washers under Washers
- Threads and tap drillsPipe threads: NPT (all 24 sizes, every ASME B1.20.1 Table 2 dimension computed from the formulas and checked)
- Fatigue: Goodman and HaighSources: Shigley examples read in the 8th edition itself (the tube example is Ex. 6-14), rainflow counts from ASTM E1049-85 (2017) Table X1.3
- Fits and tolerancesSources: every ISO 286 IT grade and fundamental deviation checked against ISO 286-1 Tables 1 to 3 (no differences)
- Outrigger pads and crane matsBS 7121 in the library: BS 7121-1:2016 5.6.2 and E.3.2.2.3 and BS 7121-3:2000 9.2.2 cited
- Natural frequencyMasses and intermediate supports can be named (beam and plate)
- Vibration isolation & dampersThe drawing takes the full width
- Base plate and anchor boltsAny rod layout and plate shape
- ShaftOpens on the pump shaft (+31 %) instead of the countershaft that is sized to exactly +0 %
- Lead and ball screwsDuty conditions can be named
- Sheet and plate: gauges and tolerancesASTM A6/A6M, A480/A480M and A568/A568M (SI annexes), EN 10051:2024 and EN 485-4 added
- Accumulator sizingEN 14359:2017 and ISO 4413:2010
- Wire ropeBreaking force by ISO 2408 (default), EN 12385-4 or ISO 10425, with each standard's classes, grades and sizes
- Pressure vesselMDMT without impact testing (UCS-66)
- Spur and helical gearsLife factors from ISO 6336-2:2006 Table 2 and ISO 6336-3:2006 Table 1
- Bolted flangeFacing (2) of Table 2-5.2 (a nubbin, Columns I and II) besides (1a)
- Fastener dimensionsIdentify: type what you measured
- Cargo securingLoop lashing
- O-ring glandRedrawn gland section: diameters dimensioned to the axis, the ring pressed to the low-pressure wall, groove radii to scale
- Relief valve sizingISO 4126 option: BS EN ISO 4126-7:2013 capacity equations for ISO 4126-1 safety valves with the certified de-rated Kdr
5 changes in 5 tools, 4 new
- Symbols new319 Greek, maths, arrow, sub/superscript, fraction, unit, GD&T, letterlike, typographic and bracket characters with their engineering meaning
- Lead and ball screws newLead screws (Tr, Acme, Stub Acme, square) and HIWIN rolled ball screws in one side view with the thread or ball groove to scale
- Sheet and plate: gauges and tolerances newPick a sheet or plate product and size and get every mill tolerance with its table and clause from EN 10029, EN 10131, EN 10143, ISO 16160
- Standards finder new706 standards and books (ISO, EN, DIN, ASME, ASTM, API, AWS, SAE, VDI, AISC and more) as metadata with our own scope summaries
- Column bucklingAll 3,255 shapes of the shared library (tees, double angles, angles, channels, HP, S and M, every HSS and EN family)
77 changes in 35 tools, 20 new
- Sling angles new1 to 4-leg bridles, spreader bar, lifting beam and tandem lifts from a drawing you drag
- Fatigue: Goodman and Haigh newHaigh diagram with modified Goodman, Gerber, ASME-elliptic, Soderberg and Langer lines, a draggable operating point and load line
- Fits and tolerances newISO 286 limits for every grade IT01–IT18 and deviation A–ZC up to 3150 mm, ANSI B4.1 RC/LC/LT/LN/FN fits
- Natural frequency newAnimated mode shapes from the computed modes for spring–mass systems (springs in series or parallel, or a beam as the spring), beams with any ends
- Flat plates newRectangular, circular and ring plates with any edges
- Hertz contact stress newBalls, rollers, seats, bores, crossed cylinders and general elliptical contacts solved exactly from the elliptic integrals
- Shaft newStepped shaft drawn as the input (drag bearings, gears, steps and diameters), gear, belt, coupling and rotor loads with the torque path, shear
- Bend allowance and K-factor newSheet-metal profile drawn as the input (L, U, Z, hat, box channel or your own), drag a flange to fold its bend and the flat length follows
- Weld group, 3D newWelds on several faces in any orientation, 3D elastic method (rotation of the attached part from the weld group's inertia tensor)
- Beam newDrag loads, supports, hinges, braces and the beam end on a to-scale drawing
- Section properties newAISC v16.0 and European shape library, drawn and built-up sections, exact area properties, FE torsion, shear centre and warping, Mohr's circle
- Springs newCompression, extension and torsion springs drawn to scale and dragged to their working points
- Bearing life newISO 281 basic and modified rating life (aISO from κ, contamination and Cu, reliability a1), X/Y equivalent loads for deep groove
- Galvanic corrosion and coatings newClick a part of the bolted joint to set its metal and coating, see which touching pair corrodes in your environment
- Pneumatic cylinder and air use newISO 15552, ISO 21287 and NFPA sizes, theoretical and effective force, load ratio, ISO 6358 valve flow (C, Cv, Kv, S or QN)
- Pressure vessel newASME VIII-1 shells (UG-27, Appendix 1-2), 2:1, torispherical, hemispherical, conical and welded flat heads (UG-32, 1-4, UG-34), one nozzle
- Spur and helical gears newRack-generated involute teeth turning in mesh to scale, contact ratio zones, undercut and pointed tips, span and ball sizes
- Tolerance stack-up newThe dimension chain is the input (add, reorder, flip, click to edit, drag a tolerance band)
- Pipe schedules newEvery ASME B36.10M wall from NPS 1/8 to 80, B36.19M stainless and B88 copper tube, cross-checked between sources with every weight recomputed
- O-ring gland newPiston, rod and face glands, static or dynamic, drawn to scale with draggable groove floor, wall and clearance
- Lifting lugCapacity maps as phase diagrams
- Lifting lugShackle bolt bending, shear and bearing are separate computed rows
- Lifting lugThe drawing names the governing check, verdict under the drawing, one Examples menu, larger phone labels
- Bolt patternVerdict right under the drawing, readable labels on phones, one-time hints on what to drag
- Bolt pattern, 3DThread stripping for bolts in tapped holes (the thread-engagement engine), with a margin column, failure preview
- Bolt pattern, 3DRobust links: schema version, old links from every earlier version still load
- Bolt pattern, 3DLoads that act off the bracket hang on a drawn, dimensioned arm whose end you drag
- Hydraulic cylinderVerdict and margins update while you drag, readable on phones, a passing example, opens in your units
- Thread engagementLinks from every earlier version keep opening (versioned state, merged over today's defaults)
- Bolt pattern, 3DA clamped stack per face (the pipe clamp's sleeve is tapped into the pipe wall), joint diagram for the selected bolt, paste from Excel with x, y
- Thread engagementFailure animation shows the mode that actually governs (tension, bending, stripping, shoulder bearing, under-head pressure) with a one-line mechanism
- Bolt pattern, 3DReady: 3D view as the input with shaded plates, hex heads and nuts on their axes, 3D load arrows that snap to the axes
- Weld groupVerdict right under the drawing, readable labels on phones, short first-visit hints, units follow your last choice
- Thread engagementBolt length: washers (ISO 7089/7092/7093, DIN 127, SAE/USS, F436, split lock, Nord-Lock), plate thicknesses
- Section propertiesLabels and pills checked by the padding and overlap audits in every view and example at three widths
- Bolt pattern, 3DReactions per face, a deformed view of the rigid-body motion, a hover card with each bolt's forces, failure previews on the margins
- Thread engagementReadable labels on phones, opens in your units, plays Show failure once on a first visit
- Section propertiesShape-table chart: zoom, pan, an overview window and log weight
- Bolt pattern, 3DFaces table with separation, slip and the edge-opening check per face
- Section propertiesMoment arrow drawn in the site's arrow style
- MaterialsFavourites, stress–strain curves, cleaner composition, an Ashby chart, and it opens on common grades
- Hardness converterOn phones the scale shows HV, HBW, HRC and Rm at a readable size, with the other scales one tap away
- Bolt pattern, 3DStiffness tab: ks/ka with Huth's bearing value and how much the answer moves when it is halved
- Section propertiesLibrary shapes drawn to each family's table convention
- Bolt pattern, 3DExports (PDF, PNG, copy), KaTeX calculation steps, Recommend for the bolt size, plain-text loads and patterns, six examples incl. a motor base
- Section propertiesBending view with the σ-through-the-depth diagram, compression and tension in their own colours, and a draggable moment vector for biaxial bending
- Bolt pattern, 3DMargin on every bolt and a verdict chip in the view
- Pipe and hose pressure dropDrag the outlet end of the pressure line to change the flow
- Bolt torque chartPhones: larger type in the drawing and chart
- Section propertiesPlastic stress block beside the section
- Stress concentrationMohr's circle at the peak or at any point you click in the stress field
- Bolt torque chartSmall inch torques shown in lbf·in
- Section propertiesBigger Mohr's circle with its readouts
- Stress concentrationFull Peterson coverage in a grouped, searchable case picker
- Bolt torque chartHead marking above each grade column
- BeamEvery load has a name you can edit on its card (defaults P1, w1, M1 …) and every load case a label
- Section propertiesOpens on a W16×26 with a cover plate against the bare beam
- Friction coefficientsOn phones every row is a two-line card with μ and its range bar in view
- FunctionsThe slider plays once on a first visit
- Stress concentrationFillet shapes beyond the single radius (two radii, elliptical, Mattheck's tensile triangles, a DIN 509 relief groove) solved by FE
- Flat platesName your loads (on the plan, in 3D, the verdict, steps and report)
- Hertz contact stress3D view of both bodies built from their radii
- Bolt torque chartWhich bolt do I have?: head and nut markings from the standards, click to light up the column
- BeamSupport reactions for connection design (largest and smallest over every combination and wheel position, factored and service)
- Column bucklingReadable labels on phones, opens in your units, plays Load it once on a first visit
- Section propertiesThe shape-table chart gives each selected family its own colour, marker and label
- Stress concentrationStress field you can trust
- Flat platesCorner uplift on the plan and in 3D with a hold-down check
- Hertz contact stressYield is the lower of a published 0.2 % yield and the hardness estimate, with its source in the margin row
- Bend allowance and K-factorAny profile: add, split (double-click a flange), move (drag the ◆ or the bend line on the flat), delete and flip bends from 1° to 179°
- Weld group, 3DSecond pass: every example load acts on a drawn part (a bolted arm with a hoist hole, a cap plate, a pin hole, a capped tube)
- Bolt torque chart14 more grades: SAE 1, 5.2, 8.2, Grade 9 (Fastenal FNL, supplier), A307, A574, A193 B7 / B8, ISO 4.6 / 5.8 / 6.8, A4-70, A2-80, with a grade chooser
- BeamOne margin row per failure mode (bending yield, lateral-torsional buckling, flange local buckling, shear, deflection, local-buckling flags)
- Section propertiesFaster first paint (material library and shape tables load afterwards)
- Bearing lifeReal half-section with shaft and housing, ring grooves, cage, shields or seals, tapered cone and cup, contact-angle arc
- Galvanic corrosion and coatingsCoating cards lead with the finish swatches, a when-to-use summary, six key facts and the layer drawing
- Unit converterUnit names shown and searchable