/
Try
What standard do I need?
Pick the job. Each list starts with the document most engineers need first, then the ones around it.
Browse by topic
Every standard and book in the catalogue, under its main topic. Open a topic, then a number for its details.
Fasteners
170
- ASME B107.3002010Torque Instruments
- ASME B18.182017Quality Assurance for Fasteners
- ASME B18.2.12012Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)
- ASME B18.2.22015Nuts for General Applications: Machine Screw Nuts; Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)
- ASME B18.2.62019Fasteners for Use in Structural Applications
- ASME B18.2.81999Clearance Holes for Bolts, Screws, and Studs
- ASME B18.21.12009Washers: Helical Spring-Lock, Tooth Lock, and Plain Washers (Inch Series)
- ASME B18.22.11965Plain Washers
- ASME B18.32012Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)
- ASME B18.3.1M1986Socket Head Cap Screws (Metric Series)
- ASME B18.8.22020Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series)
- ASTM A1932026Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
- ASTM A1942026Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
- ASTM A3072021Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
- ASTM A3202026Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
- ASTM A3542026Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
- ASTM A4492014 (R2026)Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
- ASTM A5632026Standard Specification for Carbon and Alloy Steel Nuts
- ASTM A5742021Standard Specification for Alloy Steel Socket-Head Cap Screws
- ASTM F15542020Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
- ASTM F19402007a (R2024)Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
- ASTM F19412016 (R2025)Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
- ASTM F23292015 (R2023)Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
- ASTM F31252026Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
- ASTM F33932024Standard Specification for Zinc-Flake Coating Systems for Fasteners
- ASTM F4362024Standard Specification for Hardened Steel Washers Inch and Metric Dimensions
- ASTM F4672023Standard Specification for Nonferrous Nuts for General Use
- ASTM F4682023Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- ASTM F5932024Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
- ASTM F5942024Standard Specification for Stainless Steel Nuts
- ASTM F6062026aStandard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
- ASTM F7882020 (R2025)Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
- ASTM F8372021Standard Specification for Stainless Steel Socket Head Cap Screws
- ASTM F9592026Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
- DIN 25201-42010Design guide for railway vehicles and their components — Bolted joints — Part 4: Securing of bolted joints
- DIN 267-272009Fasteners — Technical specifications — Part 27: Steel screws, bolts and studs with adhesive coating
- DIN 4402001Washers with square or round hole, especially for timber constructions
- DIN 69122009Hexagon socket head cap screws, with low head, with pilot recess
- DIN 79842009Hexagon socket head cap screws with low head
- DIN 976-12016Stud bolts — Part 1: Metric thread
- EN 14399-12015High-strength structural bolting assemblies for preloading — Part 1: General requirements
- EN 14399-102018High-strength structural bolting assemblies for preloading — Part 10: System HRC — Bolt and nut assemblies with calibrated preload
- EN 14399-32015High-strength structural bolting assemblies for preloading — Part 3: System HR — Hexagon bolt and nut assemblies
- EN 14399-42015High-strength structural bolting assemblies for preloading — Part 4: System HV — Hexagon bolt and nut assemblies
- EN 14399-52015High-strength structural bolting assemblies for preloading — Part 5: Plain washers
- EN 14399-62015High-strength structural bolting assemblies for preloading — Part 6: Plain chamfered washers
- EN 15048-12016Non-preloaded structural bolting assemblies — Part 1: General requirements
- ISO 105112012Prevailing torque type hexagon thin nuts (with non-metallic insert)
- ISO 106422004Hexagon socket countersunk head screws
- ISO 106832018Fasteners — Non-electrolytically applied zinc flake coating systems
- ISO 106842004Fasteners — Hot dip galvanized coatings
- ISO 12341997Split pins
- ISO 145892000Blind rivets — Mechanical testing
- ISO 153301999Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
- ISO 159772002Open end blind rivets with break pull mandrel and protruding head — AlA/St
- ISO 159782002Open end blind rivets with break pull mandrel and countersunk head — AlA/St
- ISO 159792002Open end blind rivets with break pull mandrel and protruding head — St/St
- ISO 159802002Open end blind rivets with break pull mandrel and countersunk head — St/St
- ISO 159812002Open end blind rivets with break pull mandrel and protruding head — AlA/AlA
- ISO 159822002Open end blind rivets with break pull mandrel and countersunk head — AlA/AlA
- ISO 159832002Open end blind rivets with break pull mandrel and protruding head — A2/A2
- ISO 159842002Open end blind rivets with break pull mandrel and countersunk head — A2/A2
- ISO 160472005Fasteners — Torque/clamp force testing
- ISO 161302015Aerospace series — Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test)
- ISO 164262002Fasteners — Quality assurance system
- ISO 165822002Open end blind rivets with break pull mandrel and protruding head — Cu/St, Cu/Br, Cu/SSt
- ISO 165852002Closed end blind rivets with break pull mandrel and protruding head — A2/SSt
- ISO 23202015Fasteners — Prevailing torque steel nuts — Functional properties
- ISO 23381997Parallel pins, of unhardened steel and austenitic stainless steel
- ISO 23411986Clevis pins with head
- ISO 234292004Gauging of hexagon sockets
- ISO 2731979Fasteners — Clearance holes for bolts and screws
- ISO 32692019Fasteners — Acceptance inspection
- ISO 3506-12020Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs with specified grades and property classes
- ISO 3506-22020Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts with specified grades and property classes
- ISO 3506-32009Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
- ISO 35081976Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
- ISO 40142022Fasteners — Hexagon head bolts — Product grades A and B
- ISO 40162011Hexagon head bolts — Product grade C
- ISO 40172022Fasteners — Hexagon head screws — Product grades A and B
- ISO 40182011Hexagon head screws — Product grade C
- ISO 40262003Hexagon socket set screws with flat point
- ISO 40272003Hexagon socket set screws with cone point
- ISO 40282003Hexagon socket set screws with dog point
- ISO 40292003Hexagon socket set screws with cup point
- ISO 40322023Fasteners — Hexagon regular nuts (style 1)
- ISO 40332023Fasteners — Hexagon high nuts (style 2)
- ISO 40342012Hexagon regular nuts (style 1) — Product grade C
- ISO 40352023Fasteners — Hexagon thin nuts chamfered (style 0)
- ISO 40362012Hexagon thin nuts (unchamfered) — Product grade B
- ISO 40422022Fasteners — Electroplated coating systems
- ISO 41611999Hexagon nuts with flange — Coarse thread
- ISO 41622012Hexagon flange bolts — Small series
- ISO 47532011Fasteners — Ends of parts with external ISO metric thread
- ISO 4759-12000Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
- ISO 4759-32016Tolerances for fasteners — Part 3: Plain washers for bolts, screws and nuts — Product grades A and C
- ISO 47622004Hexagon socket head cap screws
- ISO 6157-11988Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
- ISO 6157-21995Fasteners — Surface discontinuities — Part 2: Nuts
- ISO 6157-31988Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements
- ISO 6789-12017Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing, quality conformance testing and recalibration procedure
- ISO 6789-22017Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty
- ISO 70402012Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10
- ISO 70892000Plain washers — Normal series — Product grade A
- ISO 70902000Plain washers, chamfered — Normal series — Product grade A
- ISO 70912000Plain washers — Normal series — Product grade C
- ISO 70922000Plain washers — Small series — Product grade A
- ISO 7093-12000Plain washers — Large series — Part 1: Product grade A
- ISO 7093-22000Plain washers — Large series — Part 2: Product grade C
- ISO 70942000Plain washers — Extra large series — Product grade C
- ISO 7380-12011Button head screws — Part 1: Hexagon socket button head screws
- ISO 7380-22011Button head screws — Part 2: Hexagon socket button head screws with collar
- ISO 77211983Countersunk head screws — Head configuration and gauging
- ISO 86732012Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B
- ISO 86742012Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B
- ISO 86752012Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B
- ISO 86762011Hexagon head screws with metric fine pitch thread — Product grades A and B
- ISO 87341997Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)
- ISO 87522009Spring-type straight pins — Slotted, heavy duty
- ISO 87652011Hexagon head bolts with metric fine pitch thread — Product grades A and B
- ISO 88391986Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals
- ISO 8872000Plain washers for metric bolts, screws and nuts for general purposes — General plan
- ISO 8882012Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths
- ISO 898-12013Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
- ISO 898-22022Fasteners — Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes
- ISO 898-52012Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
- ISO 89922005Fasteners — General requirements for bolts, screws, studs and nuts
- ISO/TR 162242012Technical aspects of nut design
- JIS B 11802014Hexagon head bolts and hexagon head screws
- MIL-HDBK-601990Threaded Fasteners — Tightening to Proper Tension
- MIL-STD-1312Rev. 1997Fastener Test Methods
- NASA-STD-5020Rev. B 2021Requirements for Threaded Fastening Systems in Spaceflight Hardware
- NASA-TM-1069431995Preloaded Joint Analysis Methodology for Space Flight Systems (J. Chambers)
- RCSC2020Specification for Structural Joints Using High-Strength Bolts
- SAE J11992016Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners
- SAE J4292014Mechanical and Material Requirements for Externally Threaded Fasteners
- SAE J9952012Mechanical and Material Requirements for Steel Nuts
- VDI 2230-12015Systematic calculation of highly stressed bolted joints — Joints with one cylindrical bolt
- VDI 2230-22014Systematic calculation of highly stressed bolted joints — Multi bolted joints
- VDI 26452014Capability test of fastening technology machines — Machine capability analysis (MCA)
- VDI 2862-12012Minimum requirements for application of fastening systems and tools — Application in the automotive industry
- Introduction to the Design and Behavior of Bolted Joints4th ed.Introduction to the Design and Behavior of Bolted Joints: Non-Gasketed Joints
- ASTM A3252014 withdrawnStandard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
- ASTM A4902014a withdrawnStandard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
- ASTM F11362011 (R2019) withdrawnStandard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
- ASTM F568M2007 withdrawnStandard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
- DIN 125-11990 withdrawnWashers — Part 1: Product grade A, primarily for hexagon bolts and nuts
- DIN 1261990 withdrawnWashers for bolts with hexagon head, product grade C
- DIN 1271987 withdrawnSpring lock washers with square ends or tang ends
- DIN 433-11990 withdrawnWashers for cheese head screws, product grade A
- DIN 439-21987 withdrawnHexagon thin nuts with metric thread
- DIN 5581987 withdrawnHexagon head screws, product grade C
- DIN 6011987 withdrawnHexagon head bolts, product grade C
- DIN 79911986 withdrawnHexagon socket countersunk head screws
- DIN 90211990 withdrawnWashers — Outside diameter ≈ 3 × thread diameter
- DIN 9121983 withdrawnHexagon socket head cap screws
- DIN 9131980 withdrawnHexagon socket set screws with flat point
- DIN 9141980 withdrawnHexagon socket set screws with cone point
- DIN 9151980 withdrawnHexagon socket set screws with dog point
- DIN 9161980 withdrawnHexagon socket set screws with cup point
- DIN 931-11987 withdrawnHexagon head bolts — Sizes M1.6 to M39 — Product grades A and B
- DIN 9331987 withdrawnHexagon head screws — Thread to head — Product grades A and B
- DIN 9341987 withdrawnHexagon nuts with metric coarse and fine pitch thread — Product grades A and B
- DIN 9461991 withdrawnDetermination of coefficient of friction of bolt/nut assemblies under specified conditions
- DIN 9601987 withdrawnHexagon head bolts with metric fine pitch thread
- DIN 9611987 withdrawnHexagon head screws with metric fine pitch thread
- DIN 9751986 withdrawnThreaded rods
- DIN 9821987 withdrawnPrevailing torque type hexagon nuts with non-metallic insert, high type
- DIN 9851987 withdrawnPrevailing torque type hexagon thin nuts with non-metallic insert
- ISO 898-61994 withdrawnMechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread
Threads
36
- ASME B1.12019Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)
- ASME B1.13M2005Metric Screw Threads: M Profile
- ASME B1.21983Gages and Gaging for Unified Inch Screw Threads
- ASME B1.20.12013Pipe Threads, General Purpose, Inch
- ASME B1.20.31976Dryseal Pipe Threads (Inch)
- ASME B1.32007Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
- ASME B1.51997Acme Screw Threads
- ASME B1.81988Stub Acme Screw Threads
- ASME B1.91973Buttress Inch Screw Threads 7°/45° Form with 0.6 Pitch Basic Height of Thread Engagement
- ASME B94.11M1993Twist Drills
- BS 842007Parallel screw threads of Whitworth form — Requirements
- DIN 103-11977ISO metric trapezoidal screw threads — Profiles
- DIN 103-41977Metric ISO trapezoidal screw threads — Nominal dimensions
- DIN 13-11999ISO general purpose metric screw threads — Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
- DIN 405-11997Knuckle threads — Part 1: Thread profiles, nominal dimensions
- DIN 76-12016Thread run-outs and thread undercuts — Part 1: For ISO metric threads in accordance with DIN 13-1
- EN 10226-12004Pipe threads where pressure tight joints are made on the threads — Part 1: Taper external threads and parallel internal threads — Dimensions, tolerances and designation
- EN 10226-22005Pipe threads where pressure tight joints are made on the threads — Part 2: Taper external threads and taper internal threads — Dimensions, tolerances and designation
- ISO 228-12000Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
- ISO 2611998ISO general purpose metric screw threads — General plan
- ISO 2621998ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
- ISO 29012016ISO metric trapezoidal screw threads — Basic and design profiles
- ISO 29031993ISO metric trapezoidal screw threads — Tolerances
- ISO 29042020Trapezoidal screw threads
- ISO 5855-21999Aerospace — MJ threads — Part 2: Limit dimensions for bolts and nuts
- ISO 58641993ISO inch screw threads — Allowances and tolerances
- ISO 68-12023ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
- ISO 7-11994Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
- ISO 7242023ISO general-purpose metric screw threads — Basic dimensions
- ISO 965-12013ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
- ISO 965-21998ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
- ISO 965-31998ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads
- JIS B 02052001ISO general purpose metric screw threads
- SAE AS8879Rev. E 2017Screw Threads — UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter
- ASME B1.151995 withdrawnUnified Inch Screw Threads (UNJ Thread Form)
- DIN 404301971 withdrawnSteel conduit thread (Pg); dimensions
Welding
50
- ASME BPVC IX2025Boiler and Pressure Vessel Code, Section IX: Welding, Brazing, and Fusing Qualifications
- AWS A2.42020Standard Symbols for Welding, Brazing, and Nondestructive Examination
- AWS A3.02025Standard Welding Terms and Definitions
- AWS A5.12026Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
- AWS A5.182025Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
- AWS A5.202025Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
- AWS B2.12026Specification for Welding Procedure and Performance Qualification
- AWS D1.12025Structural Welding Code — Steel
- AWS D1.22026Structural Welding Code — Aluminum
- AWS D1.32025Structural Welding Code—Sheet Steel
- AWS D1.42018Structural Welding Code—Steel Reinforcing Bars
- AWS D1.52025Bridge Welding Code
- AWS D1.62017Structural Welding Code — Stainless Steel
- AWS D1.82021Structural Welding Code—Seismic Supplement
- AWS D14.02024Machinery and Equipment Welding Specification
- AWS D17.12024Specification for Fusion Welding for Aerospace Applications
- AWS D3.6M2017Underwater Welding Code
- AWS QC12016Specification for AWS Certification of Welding Inspectors
- CSA W592018Welded steel construction
- EN 1011-12009Welding — Recommendations for welding of metallic materials — Part 1: General guidance for arc welding
- EN 1011-22001Welding — Recommendations for welding of metallic materials — Part 2: Arc welding of ferritic steels
- EN 15085-22020Railway applications — Welding of railway vehicles and components — Part 2: Requirements for welding manufacturer
- ISO 100422018Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections
- ISO 139162017Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- ISO 139182017Welding — Studs and ceramic ferrules for arc stud welding
- ISO 139201996Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position
- ISO 141752008Welding consumables — Gases and gas mixtures for fusion welding and allied processes
- ISO 143412020Welding consumables — Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels — Classification
- ISO 145552017Welding — Arc stud welding of metallic materials
- ISO 147312019Welding coordination — Tasks and responsibilities
- ISO 147322013Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
- ISO 156072019Specification and qualification of welding procedures for metallic materials — General rules
- ISO 15609-12019Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding
- ISO 156132004Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test
- ISO 15614-12017Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
- ISO 15614-22005Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys
- ISO 17660-12006Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints
- ISO 25532019Welding and allied processes — Symbolic representation on drawings — Welded joints
- ISO 25602020Welding consumables — Covered electrodes for manual metal arc welding of non-alloy and fine grain steels — Classification
- ISO 3834-12021Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the selection of the appropriate level of quality requirements
- ISO 3834-22021Quality requirements for fusion welding of metallic materials — Part 2: Comprehensive quality requirements
- ISO 3834-32021Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements
- ISO 40632023Welding, brazing, soldering and cutting — Nomenclature of processes and reference numbers
- ISO 58172023Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
- ISO 6520-12007Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding
- ISO 9606-12017Qualification testing of welders — Fusion welding — Part 1: Steels
- ISO 9606-22004Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
- ISO 9692-12013Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
- ISO/TR 178442004Welding — Comparison of standardised methods for the avoidance of cold cracks
- AWS D14.12005 supersededSpecification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment
Structures
78
- AASHTO 1993 Guide1993AASHTO Guide for Design of Pavement Structures
- AASHTO LRFD10th ed. 2024AASHTO LRFD Bridge Design Specifications
- AISC 3032022Code of Standard Practice for Structural Steel Buildings and Bridges
- AISC 3412022Seismic Provisions for Structural Steel Buildings
- AISC 3582022Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications
- AISC 3602022Specification for Structural Steel Buildings
- AISC 3702021Specification for Structural Stainless Steel Buildings
- AISC Design Guide 13rd ed. 2024Base Connection Design for Steel Structures
- AISC Design Guide 112nd ed. 2016Vibrations of Steel-Framed Structural Systems Due to Human Activity
- AISC Design Guide 162002Flush and Extended Multiple-Row Moment End-Plate Connections
- AISC Design Guide 242nd ed. 2024Hollow Structural Section Connections
- AISC Design Guide 272nd ed. 2022Structural Stainless Steel
- AISC Design Guide 42nd ed. 2003Extended End-Plate Moment Connections — Seismic and Wind Applications
- AISC Design Guide 91997Torsional Analysis of Structural Steel Members
- AISC Steel Construction Manual16th ed. 2023Steel Construction Manual
- AISI S1002016 (R2020)North American Specification for the Design of Cold-Formed Steel Structural Members
- AISI S2402020North American Standard for Cold-Formed Steel Structural Framing
- API RP 2A-WSD22nd ed. 2014 (R2020)Planning, Designing, and Constructing Fixed Offshore Platforms — Working Stress Design
- AS 41002020Steel structures
- ASCE 72022Minimum Design Loads and Associated Criteria for Buildings and Other Structures
- Aluminum Design Manual2020Aluminum Design Manual (Specification for Aluminum Structures)
- BS 4-12005Structural steel sections — Part 1: Specification for hot-rolled sections
- CFR 49 CFR 213current (eCFR)Track Safety Standards (Title 49, Part 213)
- CSA S162019Design of steel structures
- EN 10056-12017Structural steel equal and unequal leg angles — Part 1: Dimensions
- EN 10210-22019Hot finished steel structural hollow sections — Part 2: Tolerances, dimensions and sectional properties
- EN 10219-22019Cold formed welded steel structural hollow sections — Part 2: Tolerances, dimensions and sectional properties
- EN 103652017Hot rolled steel channels, I and H sections — Dimensions and masses
- EN 1090-12009+A1:2011Execution of steel structures and aluminium structures — Part 1: Requirements for conformity assessment of structural components
- EN 1090-22018+A1:2024Execution of steel structures and aluminium structures — Part 2: Technical requirements for steel structures
- EN 138032017Railway applications — Track — Track alignment design parameters — Track gauges 1435 mm and wider
- EN 19902002+A1:2005Eurocode — Basis of structural design
- EN 1991-1-12002Eurocode 1: Actions on structures — Part 1-1: General actions — Densities, self-weight, imposed loads for buildings
- EN 1991-1-22002+AC:2009Eurocode 1: Actions on structures — Part 1-2: General actions — Actions on structures exposed to fire
- EN 1991-1-42005+A1:2010Eurocode 1: Actions on structures — Part 1-4: General actions — Wind actions
- EN 1991-32006Eurocode 1: Actions on structures — Part 3: Actions induced by cranes and machinery
- EN 1993-1-12005+A1:2014Eurocode 3: Design of steel structures — Part 1-1: General rules and rules for buildings
- EN 1993-1-102005Eurocode 3: Design of steel structures — Part 1-10: Material toughness and through-thickness properties
- EN 1993-1-112006Eurocode 3: Design of steel structures — Part 1-11: Design of structures with tension components
- EN 1993-1-122007Eurocode 3: Design of steel structures — Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
- EN 1993-1-22005Eurocode 3: Design of steel structures — Part 1-2: General rules — Structural fire design
- EN 1993-1-32006Eurocode 3: Design of steel structures — Part 1-3: General rules — Supplementary rules for cold-formed members and sheeting
- EN 1993-1-42006+A1:2015Eurocode 3: Design of steel structures — Part 1-4: General rules — Supplementary rules for stainless steels
- EN 1993-1-52006Eurocode 3: Design of steel structures — Part 1-5: Plated structural elements
- EN 1993-1-62007Eurocode 3: Design of steel structures — Part 1-6: Strength and stability of shell structures
- EN 1993-1-72007Eurocode 3: Design of steel structures — Part 1-7: Plated structures subject to out of plane loading
- EN 1993-1-82005Eurocode 3: Design of steel structures — Part 1-8: Design of joints
- EN 1993-1-92005Eurocode 3: Design of steel structures — Part 1-9: Fatigue
- EN 1993-22006Eurocode 3: Design of steel structures — Part 2: Steel bridges
- EN 1993-3-12006Eurocode 3: Design of steel structures — Part 3-1: Towers, masts and chimneys — Towers and masts
- EN 1993-3-22006Eurocode 3: Design of steel structures — Part 3-2: Towers, masts and chimneys — Chimneys
- EN 1993-4-12007Eurocode 3: Design of steel structures — Part 4-1: Silos
- EN 1993-4-22007Eurocode 3: Design of steel structures — Part 4-2: Tanks
- EN 1993-4-32007Eurocode 3: Design of steel structures — Part 4-3: Pipelines
- EN 1993-52007Eurocode 3: Design of steel structures — Part 5: Piling
- EN 1993-62007Eurocode 3: Design of steel structures — Part 6: Crane supporting structures
- EN 1994-1-12004Eurocode 4: Design of composite steel and concrete structures — Part 1-1: General rules and rules for buildings
- EN 1994-1-22005Eurocode 4: Design of composite steel and concrete structures — Part 1-2: General rules — Structural fire design
- EN 1994-22005Eurocode 4: Design of composite steel and concrete structures — Part 2: General rules and rules for bridges
- EN 1995-1-12004+A2:2014Eurocode 5: Design of timber structures — Part 1-1: General — Common rules and rules for buildings
- EN 1997-12004+A1:2013Eurocode 7 — Geotechnical design — Part 1: General rules
- EN 1999-1-12007+A2:2013Eurocode 9: Design of aluminium structures — Part 1-1: General structural rules
- EN 1999-1-22007Eurocode 9: Design of aluminium structures — Part 1-2: Structural fire design
- EN 1999-1-32007+A1:2011Eurocode 9: Design of aluminium structures — Part 1-3: Structures susceptible to fatigue
- EN 1999-1-42007Eurocode 9: Design of aluminium structures — Part 1-4: Cold-formed structural sheeting
- EN 1999-1-52007Eurocode 9: Design of aluminium structures — Part 1-5: Shell structures
- IBC2024International Building Code
- IEC 61400-12019Wind energy generation systems — Part 1: Design requirements
- ISO 101372007Bases for design of structures — Serviceability of buildings and walkways against vibrations
- ISO 138222010Bases for design of structures — Assessment of existing structures
- ISO 23942015General principles on reliability for structures
- NASA CR-21251972Methods for Analysis of Lugs (Melcher, Johnson)
- NASA-STD-5001Rev. B 2016Structural Design and Test Factors of Safety for Spaceflight Hardware
- NAVFAC DM-7.021986Foundations and Earth Structures (Design Manual 7.02)
- DIN 1025-12009 withdrawnHot rolled I-beams — Part 1: Narrow flange I-beams, I-serie — Dimensions, masses, sectional properties
- DIN 18800-12008 withdrawnSteel structures — Part 1: Design and construction
- DIN 4114-11952 withdrawnSteel structures; stability (buckling, overturning, bulging)
- ENV 1993-1-11992 withdrawnEurocode 3: Design of steel structures — Part 1-1: General rules and rules for buildings (pre-standard)
Concrete and anchors
42
- ACI 1172010Specification for Tolerances for Concrete Construction and Materials and Commentary
- ACI 209R1992Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures
- ACI 224R2001Control of Cracking in Concrete Structures
- ACI 3012020Specifications for Concrete Construction
- ACI 3182025Building Code Requirements for Structural Concrete
- ACI 347R2014Guide to Formwork for Concrete
- ACI 3492023Code Requirements for Nuclear Safety-Related Concrete Structures
- ACI 3502020Code Requirements for Environmental Engineering Concrete Structures and Commentary
- ACI 351.3R2018Report on Foundations for Dynamic Equipment
- ACI 355.22019Post-Installed Mechanical Anchors in Concrete — Qualification Requirements and Commentary
- ACI 5622021Assessment, Repair, and Rehabilitation of Existing Concrete Structures—Code and Commentary
- ANSI B212.151994Cutting Tools — Carbide-Tipped Masonry Drills and Blanks for Carbide-Tipped Masonry Drills
- AS 36002018Concrete structures
- ASTM A10642024Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM A4162026Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
- ASTM A6152026Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM A7062026Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
- ASTM C1432026Standard Test Method for Slump of Hydraulic-Cement Concrete
- ASTM C1502024Standard Specification for Portland Cement
- ASTM C312026Standard Practice for Making and Curing Concrete Test Specimens in the Field
- ASTM C332024Standard Specification for Concrete Aggregates
- ASTM C392026Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C4692022Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
- ASTM C782022Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM C942026Standard Specification for Ready-Mixed Concrete
- DIN 488-12009Reinforcing steels — Part 1: Grades, properties, marking
- EAD 330008Anchor channels
- EAD 330076Metal injection anchors for use in masonry
- EAD 330232Mechanical fasteners for use in concrete
- EAD 330499Bonded fasteners and bonded expansion fasteners for use in concrete
- EN 100802005Steel for the reinforcement of concrete — Weldable reinforcing steel — General
- EN 12390-32019Testing hardened concrete — Part 3: Compressive strength of test specimens
- EN 136702009Execution of concrete structures
- EN 137912019Assessment of in-situ compressive strength in structures and precast concrete components
- EN 197-12011Cement — Part 1: Composition, specifications and conformity criteria for common cements
- EN 1992-1-12004+A1:2014Eurocode 2: Design of concrete structures — Part 1-1: General rules and rules for buildings
- EN 1992-1-22004Eurocode 2: Design of concrete structures — Part 1-2: General rules — Structural fire design
- EN 1992-22005Eurocode 2: Design of concrete structures — Concrete bridges — Design and detailing rules
- EN 1992-32006Eurocode 2: Design of concrete structures — Part 3: Liquid retaining and containment structures
- EN 1992-42018Eurocode 2 — Design of concrete structures — Part 4: Design of fastenings for use in concrete
- EN 2062013+A2:2021Concrete — Specification, performance, production and conformity
- CEN/TS 1992-4-12009 withdrawnDesign of fastenings for use in concrete — Part 4-1: General
Pressure equipment
35
- API 20007th ed. 2014Venting Atmospheric and Low-pressure Storage Tanks
- API 51011th ed. 2022Pressure Vessel Inspection Code: In-service Inspection, Rating, Repair, and Alteration
- API 520-110th ed. 2020Sizing, Selection, and Installation of Pressure-relieving Devices — Part I: Sizing and Selection
- API 5217th ed. 2020Pressure-relieving and Depressuring Systems
- API 5268th ed. 2023Flanged Steel Pressure-relief Valves
- API 5307th ed. 2015Calculation of Heater-tube Thickness in Petroleum Refineries
- API 579-1/ASME FFS-12021Fitness-For-Service
- API 579-2/ASME FFS-22009Fitness-For-Service Example Problem Manual
- API 62012th ed. 2013Design and Construction of Large, Welded, Low-pressure Storage Tanks
- API 65014th ed. 2025Welded Tanks for Oil Storage
- API 6535th ed. 2014Tank Inspection, Repair, Alteration, and Reconstruction
- API 6A21st ed. 2018Specification for Wellhead and Tree Equipment
- API MPMS 2.2E1st ed. 2004 (errata 2009)Manual of Petroleum Measurement Standards Chapter 2.2E: Petroleum and Liquid Petroleum Products, Calibration of Horizontal Cylindrical Tanks, Part 1: Manual Methods
- ASME BPVC I2025Boiler and Pressure Vessel Code, Section I: Rules for Construction of Power Boilers
- ASME BPVC II-A2025Boiler and Pressure Vessel Code, Section II: Materials, Part A: Ferrous Material Specifications
- ASME BPVC II-D2025Boiler and Pressure Vessel Code, Section II: Materials, Part D: Properties (Customary/Metric)
- ASME BPVC III2025Boiler and Pressure Vessel Code, Section III: Rules for Construction of Nuclear Facility Components
- ASME BPVC III-52023Boiler and Pressure Vessel Code, Section III, Division 5: High Temperature Reactors
- ASME BPVC VIII-12025Boiler and Pressure Vessel Code, Section VIII: Rules for Construction of Pressure Vessels, Division 1
- ASME BPVC VIII-22025Boiler and Pressure Vessel Code, Section VIII: Rules for Construction of Pressure Vessels, Division 2: Alternative Rules
- CEN/TR 1591-22020Flanges and their joints — Design rules for gasketed circular flange connections — Part 2: Gasket parameters
- DIN 280112012Torispherical heads
- DIN 280132012Semi-ellipsoidal heads
- EN 10028-22017Flat products made of steels for pressure purposes — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
- EN 13445-12021Unfired pressure vessels — Part 1: General
- EN 13445-22021Unfired pressure vessels — Part 2: Materials
- EN 13445-32021Unfired pressure vessels — Part 3: Design
- EN 13445-42021Unfired pressure vessels — Part 4: Fabrication
- EN 13445-52021Unfired pressure vessels — Part 5: Inspection and testing
- EN 764-72002Pressure equipment — Part 7: Safety systems for unfired pressure equipment
- ISO 4126-12013Safety devices for protection against excessive pressure — Part 1: Safety valves
- ISO 4126-22018Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices
- ISO 4126-72013+A1:2016Safety devices for protection against excessive pressure — Part 7: Common data
- PED 2014/68/EU2014Directive 2014/68/EU on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (Pressure Equipment Directive)
- EN 1591-22008 withdrawnFlanges and their joints — Design rules for gasketed circular flange connections — Part 2: Gasket parameters
Piping
55
- API 5705th ed. 2024Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems
- API 5CT11th ed. 2023Casing and Tubing
- API 5L46th ed. 2018Line Pipe
- API 60014th ed. 2021Steel Gate Valves — Flanged and Butt-welding Ends, Bolted Bonnets
- API 61012th ed. 2021Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries
- API 6D25th ed. 2021Specification for Pipeline and Piping Valves
- API TR 5C32008 (reaffirmed 2015)Calculating Performance Properties of Pipe Used as Casing or Tubing
- ASME B16.112021Forged Fittings, Socket-Welding and Threaded
- ASME B16.202017Metallic Gaskets for Pipe Flanges
- ASME B16.212021Nonmetallic Flat Gaskets for Pipe Flanges
- ASME B16.252022Buttwelding Ends
- ASME B16.342020Valves — Flanged, Threaded, and Welding End
- ASME B16.472020Large Diameter Steel Flanges: NPS 26 Through NPS 60 Metric/Inch Standard
- ASME B16.52025Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 Metric/Inch Standard
- ASME B16.92018Factory-Made Wrought Buttwelding Fittings
- ASME B31.12024Power Piping
- ASME B31.122023Hydrogen Piping and Pipelines
- ASME B31.32024Process Piping
- ASME B31.42022Pipeline Transportation Systems for Liquids and Slurries
- ASME B31.52022Refrigeration Piping and Heat Transfer Components
- ASME B31.82022Gas Transmission and Distribution Piping Systems
- ASME B31.92025Building Services Piping
- ASME B31G2012Manual for Determining the Remaining Strength of Corroded Pipelines
- ASME B31J2023Stress Intensification Factors (i-Factors), Flexibility Factors, and Their Determination for Metallic Piping Components
- ASME B36.10M2022Welded and Seamless Wrought Steel Pipe
- ASME B36.19M2018Stainless Steel Pipe
- ASME PCC-12022Pressure Boundary Bolted Flange Joint Assembly
- ASME PCC-22022Repair of Pressure Equipment and Piping
- ASME PTC 19.3TW2016Thermowells
- ASTM A5302018Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
- ASTM A9992024Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
- EN 10216-12013Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties
- EN 10216-22013+A1:2019Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
- EN 102202002Seamless and welded steel tubes — Dimensions and masses per unit length
- EN 10305-12016Steel tubes for precision applications — Technical delivery conditions — Part 1: Seamless cold drawn tubes
- EN 1092-12018Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN designated — Part 1: Steel flanges
- EN 13480-22024Metallic industrial piping — Part 2: Materials
- EN 13480-32017Metallic industrial piping — Part 3: Design and calculation
- EN 15062007Ventilation for buildings — Sheet metal air ducts and fittings with circular cross-section — Dimensions
- EN 1591-12013Flanges and their joints — Design rules for gasketed circular flange connections — Part 1: Calculation
- HI 9.6.12017Rotodynamic Pumps — Guideline for NPSH Margin
- ISO 11271992Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
- ISO 119602020Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
- ISO 13628-12005Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
- ISO 137092009Centrifugal pumps for petroleum, petrochemical and natural gas industries
- ISO 31832019Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
- ISO 5167-12022Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements
- ISO 5167-22022Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 2: Orifice plates
- ISO 5167-32020Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles
- ISO 5167-42022Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 4: Venturi tubes
- ISO 99081993Technical specifications for centrifugal pumps — Class III
- ISO/TR 104002007Petroleum and natural gas industries — Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
- API Bull 5C221st ed. 1999 withdrawnBulletin on Performance Properties of Casing, Tubing, and Drill Pipe
- DIN 2391-11994 withdrawnSeamless precision steel tubes; dimensions
- ENV 102201993 withdrawnSeamless and welded steel tubes — Dimensions and masses per unit length
Materials
169
- AASHTO M270Standard Specification for Structural Steel for Bridges
- ANSI H35.22024Dimensional Tolerances for Aluminum Mill Products
- API 9418th ed. 2016Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants
- AS/NZS 11632016Cold-formed structural steel hollow sections
- AS/NZS 36782016Structural steel — Hot-rolled plates, floorplates and slabs
- AS/NZS 3679.12016Structural steel — Part 1: Hot-rolled bars and sections
- ASTM A10082026Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
- ASTM A10112025Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
- ASTM A1052026Standard Specification for Carbon Steel Forgings for Piping Applications
- ASTM A1062026Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
- ASTM A1082024Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
- ASTM A10852022Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
- ASTM A1312019Standard Specification for Structural Steel for Ships
- ASTM A1482024Standard Specification for Steel Castings, High Strength, for Structural Purposes
- ASTM A1822026bStandard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- ASTM A2132025Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
- ASTM A2162026Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
- ASTM A2342026Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
- ASTM A2402026Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
- ASTM A2422024Standard Specification for High-Strength Low-Alloy Structural Steel
- ASTM A2622015 (reapproved 2021)Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- ASTM A2692025Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
- ASTM A272026Standard Specification for Steel Castings, Carbon, for General Application
- ASTM A2762025Standard Specification for Stainless Steel Bars and Shapes
- ASTM A2832024Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
- ASTM A2852024Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
- ASTM A292026Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
- ASTM A2952014 (R2020)Standard Specification for High-Carbon Anti-Friction Bearing Steel
- ASTM A3122025Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- ASTM A3332024Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
- ASTM A3352026Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
- ASTM A3502026aStandard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A3512024Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
- ASTM A3522021Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
- ASTM A362019Standard Specification for Carbon Structural Steel
- ASTM A3872025Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
- ASTM A4032026Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
- ASTM A471999 (reapproved 2026)Standard Specification for Ferritic Malleable Iron Castings
- ASTM A4792026Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
- ASTM A482022 (R2026)Standard Specification for Gray Iron Castings
- ASTM A4802025Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM A4842024Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
- ASTM A5002023Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
- ASTM A5012021Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
- ASTM A5132025Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
- ASTM A5142022Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
- ASTM A5152017 (reapproved 2022)Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
- ASTM A5162025Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
- ASTM A5192024Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
- ASTM A5292026Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- ASTM A532024Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
- ASTM A5362026aStandard Specification for Ductile Iron Castings
- ASTM A5372020Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
- ASTM A5642025Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
- ASTM A5682024Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
- ASTM A5722025Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
- ASTM A5882024Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
- ASTM A62026aStandard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- ASTM A6532025Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM A6562024Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
- ASTM A6682023Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
- ASTM A6932023Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM A7052023Standard Specification for Age-Hardening Stainless Steel Forgings
- ASTM A7092026Standard Specification for Structural Steel for Bridges
- ASTM A7902026Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
- ASTM A9132019 (reapproved 2025)Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
- ASTM A9232025Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
- ASTM A9242024Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- ASTM A9922022Standard Specification for Structural Steel Shapes
- ASTM B1482024Standard Specification for Aluminum-Bronze Sand Castings
- ASTM B162024Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
- ASTM B2092021aStandard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
- ASTM B2112019Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
- ASTM B2212021Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
- ASTM B2412022Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
- ASTM B262025Standard Specification for Aluminum-Alloy Sand Castings
- ASTM B2652025Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
- ASTM B2712023Standard Specification for Copper-Base Alloy Centrifugal Castings
- ASTM B2802023Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
- ASTM B3082020Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
- ASTM B3382017 (reapproved 2026)Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
- ASTM B3482025Standard Specification for Titanium and Titanium Alloy Bars and Billets
- ASTM B5052023Standard Specification for Copper Alloy Continuous Castings
- ASTM B5742023Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
- ASTM B5842022Standard Specification for Copper Alloy Sand Castings for General Applications
- ASTM B882022Standard Specification for Seamless Copper Water Tube
- ASTM B902021Standard Specification for Magnesium-Alloy Sheet and Plate
- ASTM B9282015 (reapproved 2023)Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
- ASTM E5272023Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
- ASTM F20632026Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
- CSA G40.212013 (R2023)Structural quality steel
- DIN 69352011Cold bending of flat rolled steel
- EN 100202000Definition and classification of grades of steel
- EN 10025-12004Hot rolled products of structural steels — Part 1: General technical delivery conditions
- EN 10025-22019Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels
- EN 10025-32019Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
- EN 10025-42019Hot rolled products of structural steels — Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
- EN 10025-52019Hot rolled products of structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
- EN 10025-62019Hot rolled products of structural steels — Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
- EN 10027-12016Designation systems for steels — Part 1: Steel names
- EN 10027-22015Designation systems for steels — Part 2: Numerical system
- EN 10028-32017Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized
- EN 100292010Hot-rolled steel plates 3 mm thick or above — Tolerances on dimensions and shape
- EN 100512010Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels — Tolerances on dimensions and shape
- EN 10083-22006Steels for quenching and tempering — Part 2: Technical delivery conditions for non alloy steels
- EN 10083-32006Steels for quenching and tempering — Part 3: Technical delivery conditions for alloy steels
- EN 100842008Case hardening steels — Technical delivery conditions
- EN 100852001Nitriding steels — Technical delivery conditions
- EN 10088-12014Stainless steels — Part 1: List of stainless steels
- EN 10088-22014Stainless steels — Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- EN 10088-32014Stainless steels — Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- EN 101112008Continuously hot rolled low carbon steel sheet and strip for cold forming — Technical delivery conditions
- EN 101302006Cold rolled low carbon steel flat products for cold forming — Technical delivery conditions
- EN 10149-22013Hot rolled flat products made of high yield strength steels for cold forming — Part 2: Technical delivery conditions for thermomechanically rolled steels
- EN 101642018Steel products with improved deformation properties perpendicular to the surface of the product — Technical delivery conditions
- EN 102042004Metallic products — Types of inspection documents
- EN 10210-12006Hot finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions
- EN 102132007+A1:2016Steel castings for pressure purposes
- EN 10217-12019Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
- EN 10219-12006Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions
- EN 10222-22017Steel forgings for pressure purposes — Part 2: Ferritic and martensitic steels with specified elevated temperature properties
- EN 102552004+A1:2007Non-alloy steel tubes suitable for welding and threading — Technical delivery conditions
- EN 102932015Steel castings — Steel castings for general engineering uses
- EN 10297-12003Seamless circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 1: Non-alloy and alloy steel tubes
- EN 103462015Continuously hot-dip coated steel flat products for cold forming — Technical delivery conditions
- EN 121632016Copper and copper alloys — Rod for general purposes
- EN 121642024Copper and copper alloys — Rod for free machining purposes
- EN 13012008Aluminium and aluminium alloys — Drawn wire (Parts 1 to 3)
- EN 140802013Timber structures — Glued laminated timber and glued solid timber — Requirements
- EN 15612011Founding — Grey cast irons
- EN 15632018Founding — Spheroidal graphite cast irons
- EN 17062020Aluminium and aluminium alloys — Castings — Chemical composition and mechanical properties
- EN 19822017Copper and copper alloys — Ingots and castings
- EN 3382016Structural timber — Strength classes
- EN 485-22016+A1:2018Aluminium and aluminium alloys — Sheet, strip and plate — Part 2: Mechanical properties
- EN 5152017Aluminium and aluminium alloys — Wrought products — Temper designations
- EN 573-32019+A1:2022Aluminium and aluminium alloys — Chemical composition and form of wrought products — Part 3: Chemical composition and form of products
- EN 7542008Aluminium and aluminium alloys — Cold drawn rod/bar and tube (Parts 1 to 8)
- EN 755-22016Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 2: Mechanical properties
- ISO 15156-22020Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
- ISO 15156-32020Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
- ISO 4948-11982Steels — Classification — Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition
- ISO 5132012Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
- ISO 683-12016Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering
- ISO 683-172023Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
- ISO 683-22016Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering
- ISO/TS 155102014Stainless steels — Chemical composition
- JIS G 31012020Rolled steels for general structure
- JIS G 31062020Rolled steels for welded structure
- JIS G 40512016Carbon steels for machine structural use
- JIS G 40532016Low-alloyed steels for machine structural use
- MMPDS2024Metallic Materials Properties Development and Standardization
- NACE MR01752021Petroleum, petrochemical, and natural gas industries — Materials for use in H2S-containing environments in oil and gas production
- SAE AMS2750Rev. H 2022Pyrometry
- SAE AMS2759Rev. H 2021Heat Treatment of Steel Parts, General Requirements
- SAE J10862012Numbering Metals and Alloys (UNS)
- SAE J13972024Estimated Mechanical Properties and Machinability of Steel Bars
- SAE J4032014Chemical Compositions of SAE Carbon Steels
- SAE J4042021Chemical Compositions of SAE Alloy Steels
- SAE J405Chemical Compositions of SAE Wrought Stainless Steels
- SAE J411Carbon and Alloy Steels
- BS 970-31991 withdrawnSpecification for wrought steels for mechanical and allied engineering purposes — Part 3: Bright bars for general engineering purposes
- EN 10002-12001 withdrawnMetallic materials — Tensile testing — Part 1: Method of test at ambient temperature
- EN 10045-11990 withdrawnMetallic materials — Charpy impact test — Part 1: Test method (V- and U-notches)
- EN 100871998 withdrawnFree-cutting steels — Technical delivery conditions for semi-finished products, hot rolled bars and rods
- EN 10277-32008 withdrawnBright steel products — Technical delivery conditions — Part 3: Free-cutting steels
- MIL-HDBK-5J2003 supersededMetallic Materials and Elements for Aerospace Vehicle Structures
- MIL-HDBK-694A1966 withdrawnAluminum and Aluminum Alloys
- VDI 3323 withdrawnMaterial groups for cutting (machinability classification)
Testing
77
- ASME B5.542005Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers
- ASTM A3702026Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM D22402015 (R2021)Standard Test Method for Rubber Property — Durometer Hardness
- ASTM D40522022Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
- ASTM D6182021Standard Practice for Conditioning Plastics for Testing
- ASTM D6382022Standard Test Method for Tensile Properties of Plastics
- ASTM D6482018Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D6962016Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30 °C and 30 °C with a Vitreous Silica Dilatometer
- ASTM D7902025Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM E102023Standard Test Method for Brinell Hardness of Metallic Materials
- ASTM E1122025Standard Test Methods for Determining Average Grain Size
- ASTM E1402012b (R2019)Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
- ASTM E182025Standard Test Methods for Rockwell Hardness of Metallic Materials
- ASTM E18202025dStandard Test Method for Measurement of Fracture Toughness
- ASTM E232025Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E3842022Standard Test Method for Microindentation Hardness of Materials
- ASTM E3992024Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
- ASTM E4662021Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
- ASTM E6062021Standard Test Method for Strain-Controlled Fatigue Testing
- ASTM E6472024Standard Test Method for Measurement of Fatigue Crack Growth Rates
- ASTM E82025Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E8372025Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
- ASTM E92019 (R2025)Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
- ASTM E922026Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
- DIN 501002022Load controlled fatigue testing — Execution and evaluation of cyclic tests at constant load amplitudes on metallic specimens and components
- DIN 501252022Testing of metallic materials — Tensile test pieces
- IEC 61400-12-12017Wind energy generation systems — Part 12-1: Power performance measurements of electricity producing wind turbines
- IEC 61724-12021Photovoltaic system performance — Part 1: Monitoring
- ISO 10816-72009Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
- ISO 10992017Metallic materials — Fatigue testing — Axial force-controlled method
- ISO 11359-12014Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
- ISO 11359-22021Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
- ISO 121062017Metallic materials — Fatigue testing — Axial-strain-controlled method
- ISO 121072012Metallic materials — Fatigue testing — Statistical planning and analysis of data
- ISO 121352021Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
- ISO 148-12016Metallic materials — Charpy pendulum impact test — Part 1: Test method
- ISO 16859-12015Metallic materials — Leeb hardness test — Part 1: Test method
- ISO 1782019Plastics — Determination of flexural properties
- ISO 182652013Metallic materials — Conversion of hardness values
- ISO 20816-12016Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines
- ISO 20816-32022Mechanical vibration — Measurement and evaluation of machine vibration — Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000 r/min
- ISO 21940-132012Mechanical vibration — Rotor balancing — Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors
- ISO 230-22014Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
- ISO 235292016Rubber — General procedures for preparing and conditioning test pieces for physical test methods
- ISO 2912008Plastics — Standard atmospheres for conditioning and testing
- ISO 48-12018Rubber, vulcanized or thermoplastic — Determination of hardness — Part 1: Introduction and guidance
- ISO 48-22018Rubber, vulcanized or thermoplastic — Determination of hardness — Part 2: Hardness between 10 IRHD and 100 IRHD
- ISO 48-42018Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)
- ISO 48-72018Rubber, vulcanized or thermoplastic — Determination of hardness — Part 7: Apparent hardness of rubber-covered rollers by the durometer method
- ISO 48-92018Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers
- ISO 527-12019Plastics — Determination of tensile properties — Part 1: General principles
- ISO 527-22012Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
- ISO 6432024Steels — Micrographic determination of the apparent grain size
- ISO 6506-12014Metallic materials — Brinell hardness test — Part 1: Test method
- ISO 6507-12023Metallic materials — Vickers hardness test — Part 1: Test method
- ISO 6508-12023Metallic materials — Rockwell hardness test — Part 1: Test method
- ISO 6892-12019Metallic materials — Tensile testing — Part 1: Method of test at room temperature
- ISO 6892-22018Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
- ISO 7267-12008Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method
- ISO 75-12020Plastics — Determination of temperature of deflection under load — Part 1: General test method
- ISO 75-22013Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
- ISO 7500-12018Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
- ISO 8682003Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
- ISO/IEC Guide 98-32008Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
- MIL-STD-810Rev. H 2019Environmental Engineering Considerations and Laboratory Tests
- SAE J25622016Biaxial Wheel Fatigue Test
- SAE J4171983Hardness Tests and Hardness Number Conversions
- VDI 38222011Failure analysis — Fundamentals, terms, definitions, procedure of failure analysis
- ASTM E7392023 withdrawnStandard Guide for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data
- BS 9031950 withdrawnPhysical testing of rubber (historical Parts 19 and A7, hardness)
- DIN 501502000 withdrawnConversion of hardness values
- ISO 10816-11995 supersededMechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines
- ISO 10816-32009 supersededMechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
- ISO 185172005 withdrawnRubber, vulcanized or thermoplastic — Hardness testing — Introduction and guidance
- ISO 188982016 withdrawnRubber — Calibration and verification of hardness testers
- ISO 7267-22008 withdrawnRubber-covered rollers — Determination of apparent hardness — Part 2: Shore-type durometer method
- ISO 7619-12010 withdrawnRubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)
NDT and inspection
15
- ASME BPVC V2025Boiler and Pressure Vessel Code, Section V: Nondestructive Examination
- ASTM A5782017 (reapproved 2023)Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
- ASTM E1652023Standard Practice for Liquid Penetrant Testing for General Industry
- ASTM E7092021Standard Guide for Magnetic Particle Testing
- ISO 10675-12021Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
- ISO 116662018Non-destructive testing of welds — Ultrasonic testing — Acceptance levels
- ISO 176352016Non-destructive testing of welds — General rules for metallic materials
- ISO 17636-12022Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
- ISO 176372016Non-destructive testing of welds — Visual testing of fusion-welded joints
- ISO 176382016Non-destructive testing of welds — Magnetic particle testing
- ISO 176402018Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
- ISO 232772015Non-destructive testing of welds — Penetrant testing — Acceptance levels
- ISO 232782015Non-destructive testing of welds — Magnetic particle testing — Acceptance levels
- ISO 3452-12021Non-destructive testing — Penetrant testing — Part 1: General principles
- ISO 97122021Non-destructive testing — Qualification and certification of NDT personnel
Tolerancing and GD&T
37
- ASME B4.11967 (R2009)Preferred Limits and Fits for Cylindrical Parts
- ASME B4.21978 (R2009)Preferred Metric Limits and Fits
- ASME Y14.432011Dimensioning and Tolerancing Principles for Gages and Fixtures
- ASME Y14.52018Dimensioning and Tolerancing
- ASME Y14.5.12019Mathematical Definition of Dimensioning and Tolerancing Principles
- EN 101312006Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming — Tolerances on dimensions and shape
- EN 101432006Continuously hot-dip coated steel sheet and strip — Tolerances on dimensions and shape
- ISO 12022Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
- ISO 10360-22009Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 2: CMMs used for measuring linear dimensions
- ISO 105792010Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts
- ISO 11012017Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
- ISO 14253-12017Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
- ISO 14405-12016Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
- ISO 14405-22018Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes
- ISO 146382015Geometrical product specifications (GPS) — Matrix model
- ISO 161602012Hot-rolled steel sheet products — Dimensional and shape tolerances
- ISO 161622012Cold-rolled steel sheet products — Dimensional and shape tolerances
- ISO 16602017Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
- ISO 17450-12011Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification
- ISO 182862008Hot-rolled stainless steel plates — Tolerances on dimensions and shape
- ISO 220812021Geometrical product specifications (GPS) — Geometrical tolerancing — General geometrical specifications and general size specifications
- ISO 26922021Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- ISO 2768-11989General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
- ISO 286-12010Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
- ISO 286-22010Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
- ISO 36501998Geometrical Product Specifications (GPS) — Length standards — Gauge blocks
- ISO 54582018Geometrical product specifications (GPS) — Geometrical tolerancing — Pattern and combined geometrical specification
- ISO 54592011Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
- ISO 6361-42014Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
- ISO 80152011Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
- ISO 9444-22009Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and sheet/plate
- ISO 9445-22009Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and plate/sheet
- JIS B 0401-12016Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits
- EN 102581997 withdrawnCold rolled stainless steel narrow strip and cut lengths — Tolerances on dimensions and shape
- EN 102591997 withdrawnCold rolled stainless and heat resisting steel wide strip and plate/sheet — Tolerances on dimensions and shape
- EN 485-41993 withdrawnAluminium and aluminium alloys — Sheet, strip and plate — Part 4: Tolerances on shape and dimensions for cold-rolled products
- ISO 2768-21989 withdrawnGeneral tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
Surface texture
14
- ASME B46.12019Surface Texture (Surface Roughness, Waviness, and Lay)
- ASME Y14.362018Surface Texture Symbols
- ISO 13565-21996Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve
- ISO 16610-212011Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters
- ISO 21920-12021Geometrical product specifications (GPS) — Surface texture: Profile — Part 1: Indication of surface texture
- ISO 21920-22021Geometrical product specifications (GPS) — Surface texture: Profile — Part 2: Terms, definitions and surface texture parameters
- ISO 21920-32021Geometrical product specifications (GPS) — Surface texture: Profile — Part 3: Specification operators
- ISO 25178-22021Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters
- ISO 32741996Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
- DIN 4768-11990 withdrawnDetermination of surface roughness values Ra, Rz, Rmax with electric stylus instruments
- ISO 115621996 withdrawnGeometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters
- ISO 13022002 supersededGeometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation
- ISO 42871997 supersededGeometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
- ISO 42881996 supersededGeometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture
Drawings
12
- ASME Y14.1002017Engineering Drawing Practices
- ASME Y14.32012Orthographic and Pictorial Views
- ASME Y14.412019Product Definition Data Practices
- ASME Y14.82022Castings, Forgings, and Molded Parts
- DIN 85802022Manufacturing processes — Terms and definitions, division
- DIN 8593-02003Manufacturing processes joining — Part 0: General; Classification, subdivision, terms and definitions
- ISO 128-12020Technical product documentation (TPD) — General principles of representation — Part 1: Introduction and fundamental requirements
- ISO 129-12018Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles
- ISO 167922021Technical product documentation — Digital product definition data practices
- ISO 5456-21996Technical drawings — Projection methods — Part 2: Orthographic representations
- ISO 6410-11993Technical drawings — Screw threads and threaded parts — Part 1: General conventions
- ISO 72002004Technical product documentation — Data fields in title blocks and document headers
Fatigue
7
- ASTM E10491985 (R2023)Standard Practices for Cycle Counting in Fatigue Analysis
- BS 76082014+A1:2015Guide to fatigue design and assessment of steel products
- BS 79102019Guide to methods for assessing the acceptability of flaws in metallic structures
- DNV-RP-C2032021Fatigue design of offshore steel structures
- FKM Guideline7th ed. 2020Analytical strength assessment of components made of steel, cast iron and aluminium materials in mechanical engineering (Rechnerischer Festigkeitsnachweis für Maschinenbauteile)
- IIW-2259-152016Recommendations for fatigue design of welded joints and components (A. Hobbacher, ed.)
- VDI 22261965 withdrawnRecommendation for the fatigue strength calculation of metal components
Gears
26
- AGMA 2001-D042004Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth (inch)
- AGMA 2015-1-A012002Accuracy Classification System — Tangential Measurements for Cylindrical Gears
- AGMA 2101-D042004Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth (Metric Edition)
- AGMA 6022C93Design Manual for Cylindrical Wormgearing
- AGMA 6034-B921992Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors
- AGMA 6113-B162016Standard for Industrial Enclosed Gear Drives (Metric Edition)
- AGMA 908-B891989Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth
- DIN 3962-11978Tolerances for cylindrical gear teeth; tolerances for deviations of individual parameters
- DIN 39962019Calculation of load capacity of cylindrical worm gear pairs with rectangular crossing shafts
- DIN 8671986Basic rack tooth profiles for involute teeth of cylindrical gears for general engineering and heavy engineering
- ISO 1328-12013Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
- ISO 145212020Gears — Calculation of load capacity of worm gears
- ISO 217712007Gears — Cylindrical involute gears and gear pairs — Concepts and geometry
- ISO 531998Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile
- ISO 541996Cylindrical gears for general engineering and for heavy engineering — Modules
- ISO 6336-12019Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors
- ISO 6336-22019Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting)
- ISO 6336-32019Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
- ISO 6336-52016Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
- ISO 6336-62019Calculation of load capacity of spur and helical gears — Part 6: Calculation of service life under variable load
- ISO/TR 14179-12001Gears — Thermal capacity — Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature
- ISO/TR 14179-22001Gears — Thermal capacity — Part 2: Thermal load-carrying capacity
- ISO/TR 6336-302017Calculation of load capacity of spur and helical gears — Calculation examples for the application of ISO 6336 parts 1, 2, 3, 5
- VDI 2736-22014Thermoplastic gear wheels — Cylindrical gears — Calculation of the load-carrying capacity
- DIN 39601987 withdrawnDefinitions, parameters and equations for involute cylindrical gears and gear pairs
- DIN 3990-11987 withdrawnCalculation of load capacity of cylindrical gears; introduction and general influence factors
Bearings
15
- ABMA 112014Load Ratings and Fatigue Life for Roller Bearings
- ABMA 92015Load Ratings and Fatigue Life for Ball Bearings
- ISO 152017Rolling bearings — Radial bearings — Boundary dimensions, general plan
- ISO 152432017Rolling bearings — Damage and failures — Terms, characteristics and causes
- ISO 2812007Rolling bearings — Dynamic load ratings and rating life
- ISO 3547-12018Plain bearings — Wrapped bushes — Part 1: Dimensions
- ISO 4642015Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (GPS) and tolerance values
- ISO 4922023Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
- ISO 5753-12009Rolling bearings — Internal clearance — Part 1: Radial internal clearance for radial bearings
- ISO 5821995Rolling bearings — Chamfer dimensions — Maximum values
- ISO 7148-22012Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials
- ISO 762006Rolling bearings — Static load ratings
- ISO/TS 162812008Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings
- JIS B 15182013Rolling bearings — Dynamic load ratings and rating life
- SKF Rolling bearings cataloguePUB BU/P1 17000Rolling bearings (general catalogue)
Springs
26
- ASTM A2272023Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
- ASTM A2282018 (R2024)Standard Specification for Steel Wire, Music Spring Quality
- ASTM A2292023Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
- ASTM A2302019Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
- ASTM A2312019Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
- ASTM A2322019Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
- ASTM A3132018 (R2025)Standard Specification for Stainless Steel Spring Wire
- ASTM A4012024Standard Specification for Steel Wire, Chromium-Silicon Alloy
- DIN 20951973Helical springs made of round wire; quality specifications for cold coiled compression springs
- EN 100892002Hot rolled steels for quenched and tempered springs — Technical delivery conditions
- EN 10132-42000Cold rolled narrow steel strip for heat treatment — Technical delivery conditions — Part 4: Spring steels and other applications
- EN 10270-12011Steel wire for mechanical springs — Part 1: Patented cold drawn unalloyed spring steel wire
- EN 10270-22011Steel wire for mechanical springs — Part 2: Oil hardened and tempered spring steel wire
- EN 10270-32011Steel wire for mechanical springs — Part 3: Stainless spring steel wire
- EN 13906-12013Cylindrical helical springs made from round wire and bar — Calculation and design — Part 1: Compression springs
- EN 13906-22013Cylindrical helical springs made from round wire and bar — Calculation and design — Part 2: Extension springs
- EN 13906-32014Cylindrical helical springs made from round wire and bar — Calculation and design — Part 3: Torsion springs
- EN 158002008Cylindrical helical springs made from round wire — Quality specifications for cold coiled compression springs
- EN 169832016Disc springs — Quality specifications — Dimensions
- EN 169842016Disc springs — Calculation
- ISO 19690-12017Disc springs — Part 1: Calculation
- JIS B 2706-12023Disc springs — Part 1: Calculation
- JIS B 2706-22023Disc springs — Part 2: Product specifications and method of testing
- SMI Handbook of Spring Design2002Handbook of Spring Design (Spring Manufacturers Institute)
- DIN 20932006 withdrawnDisc springs — Quality specifications — Dimensions
- JIS B 27062013 withdrawnDisc springs
Seals and O-rings
15
- API 6824th ed. 2014 (R2022)Pumps — Shaft Sealing Systems for Centrifugal and Rotary Pumps
- ASTM D14182022Standard Practice for Rubber and Rubber Latices — Nomenclature
- ASTM D20002018 (R2024)Standard Classification System for Rubber Products in Automotive Applications
- EN 135552021Flanges and their joints — Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
- EN 1514-11997Flanges and their joints — Dimensions of gaskets for PN-designated flanges — Part 1: Non-metallic flat gaskets with or without inserts
- EN 1514-22005Flanges and their joints — Gaskets for PN-designated flanges — Part 2: Spiral wound gaskets for use with steel flanges
- EN 1514-62003Flanges and their joints — Dimensions of gaskets for PN-designated flanges — Part 6: Covered serrated metal gaskets for use with steel flanges
- ISO 3601-12012Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
- ISO 3601-22016Fluid power systems — O-rings — Part 2: Housing dimensions for general applications
- ISO 3601-32005Fluid power systems — O-rings — Part 3: Quality acceptance criteria
- ISO 6194-12007Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances
- JIS B 2401-12012O-rings — Part 1: O-rings
- SAE AS568Rev. F 2020Aerospace Size Standard for O-rings
- Parker O-Ring HandbookORD 5700Parker O-Ring Handbook (ORD 5700)
- DIN 37601996 withdrawnRotary shaft lip type seals
Shafts, keys and splines
33
- AGMA 922A96Load Classification and Service Factors for Flexible Couplings
- ANSI B27.71977General Purpose Tapered and Reduced Cross Section Retaining Rings (Metric)
- ANSI B27.8M1978General Purpose Metric Tapered and Reduced Cross Section Retaining Rings
- ANSI B92.11996Involute Splines and Inspection
- API 6179th ed. 2022Axial and Centrifugal Compressors and Expander-compressors
- API 6842nd ed. 2005API Standard Paragraphs Rotordynamic Tutorial: Lateral Critical Speeds, Unbalance Response, Stability, Train Torsionals, and Rotor Balancing
- API 6862nd ed. 2009Recommended Practice for Machinery Installation and Installation Design
- ASME B17.11967Keys and Keyseats
- ASME B17.21967Woodruff Keys and Keyseats
- ASME B18.271998Tapered and Reduced Cross Section Retaining Rings (Inch Series)
- DIN 4712011Retaining rings for shafts — Normal type and heavy type
- DIN 4722017Retaining rings for bores — Normal type and heavy type
- DIN 5092022Technical product documentation — Relief grooves — Types and dimensions
- DIN 5480-12006Involute splines based on reference diameters — Part 1: General
- DIN 67992016Retaining washers for shafts
- DIN 6885-12022Drive type fastenings without taper action — Parallel keys, keyways, deep pattern
- DIN 68922012Drive type fastenings without taper action — Parallel keys — Calculation and design
- DIN 7190-12017Interference fits — Part 1: Calculation and design rules for cylindrical self-locking pressure joints
- DIN 743-12012Calculation of load capacity of shafts and axles — Part 1: General
- DIN 743-22012Calculation of load capacity of shafts and axles — Part 2: Theoretical stress concentration factors and fatigue notch factors
- IEC 60072-12022Dimensions and output series for rotating electrical machines — Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1 080
- ISO 141982Straight-sided splines with cylindrical inside diameter centring — Dimensions, tolerances and verification
- ISO 21940-112016Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour
- ISO 24911974Thin parallel keys and their corresponding keyways (Dimensions in millimetres)
- ISO 3408-12006Ball screws — Part 1: Vocabulary and designation
- ISO 3408-52006Ball screws — Part 5: Static and dynamic axial load ratings and operational life
- ISO 39121977Woodruff keys and keyways
- ISO 4156-12021Straight cylindrical involute splines — Metric module, side fit — Part 1: Generalities
- ISO 7731969Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres)
- NEMA MG 12021Motors and Generators
- AGMA 514.021971 withdrawnLoad Classification and Service Factors for Flexible Couplings
- ASME B106.1M1985 withdrawnDesign of Transmission Shafting
- ISO 1940-12003 supersededMechanical vibration — Balance quality requirements for rotors in a constant (rigid) state — Part 1: Specification and verification of balance tolerances
Chains and belts
16
- ASME B29.12011Precision Power Transmission Roller Chains, Attachments, and Sprockets
- DIN 221012011Continuous conveyors — Belt conveyors for loose bulk materials — Basis for calculation and dimensioning
- ISO 108232004Guidance on the selection of roller chain drives
- ISO 130502014Curvilinear toothed synchronous belt drive systems
- ISO 15371975Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Idlers
- ISO 193472015Synchronous belt drives — Imperial pitch trapezoidal profile system — Belts and pulleys
- ISO 41831995Belt drives — Classical and narrow V-belts — Grooved pulleys (system based on datum width)
- ISO 41842025Belt drives — Classical and narrow V-belts — Lengths in datum system
- ISO 50481989Continuous mechanical handling equipment — Belt conveyors with carrying idlers — Calculation of operating power and tensile forces
- ISO 52921995Belt drives — V-belts and V-ribbed belts for industrial applications — Calculation of power ratings
- ISO 52932004Conveyor belts — Determination of minimum transition distance on three idler rolls
- ISO 52942012Synchronous belt drives — Pulleys
- ISO 52951987Synchronous belts — Calculation of power rating and drive centre distance
- ISO 6062015Short-pitch transmission precision roller chains and bushing chains, attachments and associated chain sprockets
- ISO 95632015Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method
- ISO 52962012 supersededSynchronous belt drives — Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH — Metric and inch dimensions
Lifting and cranes
88
- ANSI MH27.1Specifications for Patented Track Underhung Cranes and Monorail Systems
- API RP 2D7th ed. 2014Operation and Maintenance of Offshore Cranes
- API Spec 2C8th ed. 2020Offshore Pedestal-Mounted Cranes
- ASME B18.152015Forged Eyebolts
- ASME B30.12026Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries
- ASME B30.102019Hooks
- ASME B30.162022Overhead Underhung and Stationary Hoists
- ASME B30.172020Cranes and Monorails (With Underhung Trolley or Bridge)
- ASME B30.22022Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)
- ASME B30.202021Below-the-Hook Lifting Devices
- ASME B30.212025Lever Hoists
- ASME B30.232022Personnel Lifting Systems
- ASME B30.262015Rigging Hardware
- ASME B30.302023Ropes
- ASME B30.52025Mobile and Locomotive Cranes
- ASME B30.92021Slings
- ASME BTH-12023Design of Below-the-Hook Lifting Devices
- ASTM A10232021Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
- ASTM A3912021Standard Specification for Grade 80 Alloy Steel Chain
- ASTM A9732021Standard Specification for Grade 100 Alloy Steel Chain
- BS 7121-12016Code of practice for safe use of cranes — Part 1: General
- BS 7121-32017Code of practice for safe use of cranes — Part 3: Mobile cranes
- CFR 30 CFR 57.19021currentUnderground metal and nonmetal mines, hoisting: minimum rope strength
- CMAA 702020Specifications for Top Running Bridge and Gantry Type Multiple Girder Electric Overhead Traveling Cranes
- CMAA 742020Specifications for Top Running and Under Running Single Girder Electric Traveling Cranes Utilizing Under Running Trolley Hoist
- DIN 15020-11974Lifting appliances; principles relating to rope drives; calculation and construction
- DIN 154001990Lifting hooks; materials, mechanical properties, lifting capacity and stresses
- DIN 15401-11982Lifting hooks for lifting appliances; Single hooks; Unmachined parts
- DIN 536-11991Crane rails — Part 1: Dimensions, sectional properties and steel grades for crane rails with base (flat bottom crane rails), form A
- DIN 5802010Lifting eye bolts
- DIN 5822010Lifting eye nuts
- DNV-ST-03782021Offshore and platform lifting appliances
- DNV-ST-E27120172.7-1 Offshore containers
- EN 12195-12010Load restraining on road vehicles — Safety — Part 1: Calculation of securing forces
- EN 12195-22000Load restraint assemblies on road vehicles — Safety — Part 2: Web lashing made from man-made fibres
- EN 12385-42002+A1:2008Steel wire ropes — Safety — Part 4: Stranded ropes for general lifting applications
- EN 130002010+A1:2014Cranes — Mobile cranes
- EN 13001-12015Cranes — General design — Part 1: General principles and requirements
- EN 13001-22021Crane safety — General design — Part 2: Load actions
- EN 13001-3-12012+A2:2018Cranes — General design — Part 3-1: Limit states and proof competence of steel structure
- EN 13001-3-22014Cranes — General design — Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
- EN 13001-3-32014Cranes — General design — Part 3-3: Limit states and proof of competence of wheel/rail contacts
- EN 13001-3-42018Cranes — General design — Part 3-4: Limit states and proof of competence of machinery — Bearings
- EN 13001-3-52016+A1:2021Cranes — General design — Part 3-5: Limit states and proof of competence of forged hooks
- EN 13001-3-62018+A1:2021Cranes — General design — Part 3-6: Limit states and proof of competence of machinery — Hydraulic cylinders
- EN 131552003+A2:2009Cranes — Safety — Non-fixed load lifting attachments
- EN 131572004+A1:2009Cranes — Safety — Hand powered cranes
- EN 13411-22001+A1:2008Terminations for steel wire ropes — Safety — Part 2: Splicing of eyes for wire rope slings
- EN 13411-32022Terminations for steel wire ropes — Safety — Part 3: Ferrules and ferrule-securing
- EN 13411-42021Terminations for steel wire ropes — Safety — Part 4: Metal and resin socketing
- EN 13411-52003+A1:2008Terminations for steel wire ropes — Safety — Part 5: U-bolt wire rope grips
- EN 13411-62004+A1:2008Terminations for steel wire ropes — Safety — Part 6: Asymmetric wedge socket
- EN 13411-72021Terminations for steel wire ropes — Safety — Part 7: Symmetric wedge socket
- EN 13411-82011Terminations for steel wire ropes — Safety — Part 8: Swage terminals and swaging
- EN 13414-12003+A2:2008Steel wire rope slings — Safety — Part 1: Slings for general lifting service
- EN 138892003+A1:2008Forged steel shackles for general lifting purposes — Dee shackles and bow shackles — Grade 6 — Safety
- EN 144392025Cranes — Tower cranes
- EN 14492-12006+A1:2009Cranes — Power driven winches and hoists — Part 1: Power driven winches
- EN 14492-22019Cranes — Power driven winches and hoists — Part 2: Power driven hoists
- EN 1492-12000+A1:2008Textile slings — Safety — Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
- EN 1492-22000+A1:2008Textile slings — Safety — Part 2: Roundslings made of man-made fibres for general purpose use
- EN 150112020Cranes — Bridge and gantry cranes
- EN 1677-12000+A1:2008Components for slings — Safety — Part 1: Forged steel components, Grade 8
- EN 18082015Safety requirements for suspended access equipment — Design calculations, stability criteria, construction — Examinations and tests
- EN 280-12022Mobile elevating work platforms — Part 1: Design calculations — Stability criteria — Construction — Safety — Examinations and tests
- EN 818-21996+A1:2008Short link chain for lifting purposes — Safety — Part 2: Medium tolerance chain for chain slings — Grade 8
- EN 818-41996+A1:2008Short link chain for lifting purposes — Safety — Part 4: Chain slings — Grade 8
- FEM 1.0013rd ed. 1998Rules for the design of hoisting appliances
- ISO 104252003Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance
- ISO 10855-12018Offshore containers and associated lifting sets — Part 1: Design, manufacture and marking of offshore containers
- ISO 12480-11997Cranes — Safe use — Part 1: General
- ISO 124822014Cranes — Monitoring for crane design working period
- ISO 166252013Cranes and hoists — Selection of wire ropes, drums and sheaves
- ISO 203322016Cranes — Proof of competence of steel structures
- ISO 24082017Steel wire ropes — Requirements
- ISO 4301-12016Cranes — Classification — Part 1: General
- ISO 4306-12007Cranes — Vocabulary — Part 1: General
- ISO 43092017Cranes — Wire ropes — Care and maintenance, inspection and discard
- ISO 8686-12012Cranes — Design principles for loads and load combinations — Part 1: General
- ISO 9927-12013Cranes — Inspections — Part 1: General
- OSHA 29 CFR 1910.179eCFR, amended continuallyOverhead and gantry cranes
- OSHA 29 CFR 1910.184eCFR, amended continuallySlings
- OSHA 29 CFR 1926.1400eCFR, amended continuallyCranes and Derricks in Construction (Subpart CC)
- Crosby User's Guide for Liftingcurrent catalogueCrosby General Catalog and User's Guide for Lifting
- ANSI M11.11960 withdrawnWire Rope for Mines
- ASME B30.112010 withdrawnMonorails and Underhung Cranes
- DIN 15018-11984 withdrawnCranes; steel structures; verification and analyses
- EN 12079-12006 withdrawnOffshore containers and associated lifting sets — Part 1: Offshore containers — Design, manufacture and marking
Fluid power
49
- API 16D2018Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment
- ASME B40.1002022Pressure Gauges and Gauge Attachments
- ASTM D22702024Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
- ASTM D3412020 (R2025)Standard Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products
- ASTM D4452026Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
- DIN 3015-11999Clamps for pipes, tubes and hoses — Part 1: Light series clamps
- EN 10305-42016Steel tubes for precision applications — Technical delivery conditions — Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
- EN 143592017Gas-loaded accumulators for fluid power applications
- EN 837-11996Pressure gauges — Part 1: Bourdon tube pressure gauges — Dimensions, metrology, requirements and testing
- EN 8532015Rubber hoses and hose assemblies — Wire braid reinforced hydraulic type — Specification
- EN 8562015Rubber hoses and hose assemblies — Rubber-covered spiral wire reinforced hydraulic type — Specification
- EN 8572015Rubber hoses and hose assemblies — Wire braid reinforced compact type for hydraulic applications — Specification
- ISO 101002020Hydraulic fluid power — Cylinders — Acceptance tests
- ISO 112372017Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
- ISO 1179-12013Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
- ISO 1219-12012Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications
- ISO 1219-22012Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
- ISO 14362020Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
- ISO 155522018Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions
- ISO 160282006Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications
- ISO 187522014Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification
- ISO 212872004Pneumatic fluid power — Cylinders — Compact cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm
- ISO 33202013Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series
- ISO 34481992Industrial liquid lubricants — ISO viscosity classification
- ISO 38622020Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification
- ISO 43952009Fluid power systems and components — Cylinder piston rod end types and dimensions
- ISO 44062021Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
- ISO 44132010Hydraulic fluid power — General rules and safety requirements for systems and their components
- ISO 44142010Pneumatic fluid power — General rules and safety requirements for systems and their components
- ISO 6020-22015Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series
- ISO 60222006Hydraulic fluid power — Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
- ISO 6149-12019Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
- ISO 6358-12013Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow
- ISO 72412014Hydraulic fluid power — Dimensions and requirements of quick-action couplings
- ISO 8434-12018Metallic tube connections for fluid power and general use — Part 1: 24° cone connectors
- ISO 8434-32005Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
- ISO 9974-11996Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
- NFPA T3.6.72016Fluid power systems and products — Square head industrial cylinders — Mounting dimensions
- SAE J14532017Fitting — O-Ring Face Seal
- SAE J1926-12019Connections for General Use and Fluid Power — Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing — Part 1: Threaded Port with O-Ring Seal in Truncated Housing
- SAE J3002021Engine Oil Viscosity Classification
- SAE J3062019Automotive Gear Lubricant Viscosity Classification
- SAE J5142020Hydraulic Tube Fittings
- SAE J5172017Hydraulic Hose
- SAE J5182020Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flanged Type
- Rexroth Hydraulics TrainerVol. 1The Hydraulic Trainer, Volume 1: Basic Principles and Components of Fluid Technology
- DIN 23531998 withdrawnSolderless compression couplings with cutting ring
- DIN 245541990 withdrawnFluid power systems; hydraulics; hydraulic cylinders; nominal pressure 250 bar, mounting dimensions
- ISO 64311992 withdrawnPneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm — Mounting interface dimensions
Corrosion and coatings
73
- AS/NZS 12142016Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series)
- AS/NZS 2312.22014Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings — Part 2: Hot dip galvanizing
- AS/NZS 46802006Hot-dip galvanized (zinc) coatings on fabricated ferrous articles
- ASTM A1232024Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- ASTM A1432020Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
- ASTM A1532023Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
- ASTM A3802025Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
- ASTM A9672025Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
- ASTM B1172026aStandard Practice for Operating Salt Spray (Fog) Apparatus
- ASTM B4882018Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
- ASTM B5452022Standard Specification for Electrodeposited Coatings of Tin
- ASTM B6332023Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- ASTM B6892023Standard Specification for Electroplated Engineering Nickel Coatings
- ASTM B6952021Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
- ASTM B6962021Standard Specification for Coatings of Cadmium Mechanically Deposited
- ASTM B7002020Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- ASTM B7332022Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
- ASTM B8412018Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits
- ASTM B8502021Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
- ASTM F11372020Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
- ASTM G482025Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- ASTM G711981 (R2024)Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
- ASTM G821998 (R2021)Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
- ASTM G852019Standard Practice for Modified Salt Spray (Fog) Testing
- AWS C2.181993 (R2001)Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites
- BS 7371-61998Coatings on metal fasteners — Part 6: Specification for hot dipped galvanized coatings
- DIN 500182013Testing in a saturated atmosphere in the presence of sulfur dioxide
- DIN 509192016Corrosion of metals — Corrosion investigations of galvanic corrosion in electrolytic solutions
- DNV-RP-B4012021Cathodic protection design
- EN 102401997Internal and/or external protective coatings for steel tubes — Specification for hot dip galvanized coatings applied in automatic plants
- EN 129542019General principles of cathodic protection of buried or immersed onshore metallic structures
- EN 138582006Corrosion protection of metals — Non-electrolytically applied zinc flake coatings on iron or steel parts
- ISO 126832004Mechanically deposited coatings of zinc — Specification and test methods
- ISO 12944-22017Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
- ISO 12944-52019Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems
- ISO 12944-62018Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods
- ISO 12944-92018Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
- ISO 131742012Cathodic protection of harbour installations
- ISO 14612022Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
- ISO 14713-12017Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance
- ISO 15589-12015Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
- ISO 15589-22012Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
- ISO 157262009Metallic and other inorganic coatings — Electrodeposited zinc alloys with nickel, cobalt or iron
- ISO 160482003Passivation of corrosion-resistant stainless-steel fasteners
- ISO 176682016Zinc diffusion coatings on ferrous products — Sherardizing — Specification
- ISO 195982016Metallic coatings — Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
- ISO 2063-12017Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems
- ISO 20812008Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel
- ISO 20822017Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel
- ISO 61582018Metallic and other inorganic coatings — Electrodeposited coatings of chromium for engineering purposes
- ISO 8501-12007Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
- ISO 92232012Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
- ISO 92242012Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
- ISO 92272022Corrosion tests in artificial atmospheres — Salt spray tests
- ISO 97172017Metallic and other inorganic coatings — Phosphate conversion coating of metals
- MIL-DTL-13924DCoating, Oxide, Black, for Ferrous Metals
- MIL-DTL-14072Rev. F 2013Finishes for Ground Based Electronic Equipment
- MIL-DTL-5541FChemical Conversion Coatings on Aluminum and Aluminum Alloys
- MIL-DTL-81706Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys
- MIL-HDBK-12501995Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies
- MIL-HDBK-7291983Corrosion and Corrosion Prevention — Metals
- MIL-PRF-16173ECorrosion Preventive Compound, Solvent Cutback, Cold-Application
- MIL-PRF-8625FAnodic Coatings for Aluminum and Aluminum Alloys
- MIL-STD-889Rev. D 2021Dissimilar Metals
- NASA-STD-60122016Corrosion Protection for Space Flight Hardware
- SAE AMS2700Rev. G 2025Passivation of Corrosion Resistant Steels
- SSPC-SP 102007Near-White Blast Cleaning
- ASTM F28332011 withdrawnStandard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
- MIL-C-26074E withdrawnCoatings, Electroless Nickel, Requirements for
- MIL-C-81562 withdrawnCoatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited)
- MIL-P-27418 withdrawnPlating, Soft Nickel (Sulfamate Nickel)
- MIL-STD-1250 withdrawnCorrosion Prevention and Deterioration Control in Electronic Components and Assemblies
- MIL-T-10727 withdrawnTin Plating: Electrodeposited or Hot-Dipped, for Ferrous and Nonferrous Metals
Heat and insulation
8
- ASME PTC 42013Fired Steam Generators
- ASME PTC 4.42008Gas Turbine Heat Recovery Steam Generators
- EN 12831-12017Energy performance of buildings — Method for calculation of the design heat load — Part 1: Space heating load, Module M3-3
- ISO 104562007Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
- ISO 122412022Thermal insulation for building equipment and industrial installations — Calculation rules
- ISO 13732-12006Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
- ISO 137882012Hygrothermal performance of building components and building elements — Internal surface temperature to avoid critical surface humidity and interstitial condensation — Calculation methods
- EN 128312003 supersededHeating systems in buildings — Method for calculation of the design heat load
Safety and quality
54
- AIAG MSA4th ed. (2010)Measurement Systems Analysis reference manual
- ANS 6.4.31991Gamma-Ray Attenuation Coefficients and Buildup Factors for Engineering Materials
- API RP 592nd ed. 2006 (reaffirmed 2018)Recommended Practice for Well Control Operations
- EN 12195-32001Load restraint assemblies on road vehicles — Safety — Part 3: Lashing chains
- EN 12464-12021Light and lighting — Lighting of work places — Part 1: Indoor work places
- EN 126402019Securing of cargo on road vehicles — Lashing points on commercial vehicles for goods transportation — Minimum requirements and testing
- EN 128452015+A1:2019Fixed firefighting systems — Automatic sprinkler systems — Design, installation and maintenance
- EN 60204-12018Safety of machinery — Electrical equipment of machines — Part 1: General requirements
- IATF 169492016Quality management system requirements for automotive production and relevant service parts organizations
- IEC 60034-12022Rotating electrical machines — Part 1: Rating and performance
- IEC 60034-30-12014Rotating electrical machines — Part 30-1: Efficiency classes of line operated AC motors (IE code)
- IEC 60076-202017Power transformers — Part 20: Energy efficiency
- IEC 60076-81997Power transformers — Part 8: Application guide
- IEC 60300-3-32017Dependability management — Part 3-3: Application guide — Life cycle costing
- IEC 606232017Secondary cells and batteries containing alkaline or other non-acid electrolytes — Vented nickel-cadmium prismatic rechargeable single cells
- IEC 608122018Failure modes and effects analysis (FMEA and FMECA)
- IEC 60831-12014Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V — Part 1: General — Performance, testing and rating — Safety requirements — Guide for installation and operation
- IEC 60896-112002Stationary lead-acid batteries — Part 11: Vented types — General requirements and methods of tests
- IEC 61000-2-42024Electromagnetic compatibility (EMC) — Part 2-4: Environment — Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances
- IEC 610252006Fault tree analysis (FTA)
- IEC 610782016Reliability block diagrams
- IEC 61508-12010Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 1: General requirements
- IEC 616421997Industrial a.c. networks affected by harmonics — Application of filters and shunt capacitors
- IEC 616492008Weibull analysis
- IEC 617032016Mathematical expressions for reliability, availability, maintainability and maintenance support terms
- IEC 619212017Power capacitors — Low-voltage power factor correction banks
- IEC 620612021Safety of machinery — Functional safety of safety-related control systems
- IEC 625482016Photovoltaic (PV) arrays — Design requirements
- IMO MSC.267(85)2008International Code on Intact Stability, 2008 (2008 IS Code)
- ISO 100122003Measurement management systems — Requirements for measurement processes and measuring equipment
- ISO 121002010Safety of machinery — General principles for design — Risk assessment and risk reduction
- ISO 134852016Medical devices — Quality management systems — Requirements for regulatory purposes
- ISO 13849-12023Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
- ISO 138572019Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs
- ISO 140012026Environmental management systems — Requirements with guidance for use
- ISO 141202015Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards
- ISO 190112018Guidelines for auditing management systems
- ISO 22514-22017Statistical methods in process management — Capability and performance — Part 2: Process capability and performance of time-dependent process models
- ISO 2859-11999Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO 310002018Risk management — Guidelines
- ISO 450012018+A1:2024Occupational health and safety management systems — Requirements with guidance for use
- ISO 54791997Statistical interpretation of data — Tests for departure from the normal distribution
- ISO 7870-22013Control charts — Part 2: Shewhart control charts
- ISO 8995-12002Lighting of work places — Part 1: Indoor
- ISO 90002015Quality management systems — Fundamentals and vocabulary
- ISO 90012026Quality management systems — Requirements
- ISO 90042018Quality management — Quality of an organization — Guidance to achieve sustained success
- ISO/IEC 170202012Conformity assessment — Requirements for the operation of various types of bodies performing inspection
- ISO/IEC 170252017General requirements for the competence of testing and calibration laboratories
- MD 2006/42/EC2006Directive 2006/42/EC on machinery (Machinery Directive)
- MR (EU) 2023/12302023Regulation (EU) 2023/1230 on machinery
- NFPA 132025Standard for the Installation of Sprinkler Systems
- NFPA 792024Electrical Standard for Industrial Machinery
- SAE AS9100Rev. D 2016Quality Management Systems — Requirements for Aviation, Space, and Defense Organizations
Acoustics and noise
4
- DIN 180412016Hörsamkeit in Räumen — Anforderungen, Empfehlungen und Hinweise für die Planung
- IEC 61672-12013Electroacoustics — Sound level meters — Part 1: Specifications
- ISO 9613-11993Acoustics — Attenuation of sound during propagation outdoors — Part 1: Calculation of the absorption of sound by the atmosphere
- ISO 9613-21996Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation
Units
12
- ASTM B2582018Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
- ASTM D12502019Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils
- ASTM D21612020Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
- DIN 1319-11995Fundamentals of metrology — Part 1: Basic terminology
- DIN 13451993Thermodynamics — Basic concepts
- ISO 134431996Natural gas — Standard reference conditions
- ISO 25331975Standard Atmosphere
- ISO 31973Preferred numbers — Series of preferred numbers
- ISO 80000-12022Quantities and units — Part 1: General
- ISO 80000-42019Quantities and units — Part 4: Mechanics
- NIST SP 3302019The International System of Units (SI)
- NIST SP 8112008Guide for the Use of the International System of Units (SI)
Handbooks and textbooks
50
- ISO 4971973Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
- ASM Handbook Vol. 1Vol. 1ASM Handbook, Volume 1: Properties and Selection: Irons, Steels, and High-Performance Alloys
- ASM Handbook Vol. 2Vol. 2ASM Handbook, Volume 2: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials
- Advanced Mechanics of Materials and Applied Elasticity6th ed.Advanced Mechanics of Materials and Applied Elasticity
- Airframe Structural Design2nd ed.Airframe Structural Design: Practical Design Information and Data on Aircraft Structures
- Analysis and Design of Flight Vehicle Structures1st ed.Analysis and Design of Flight Vehicle Structures
- CRC Mechanical Engineering Handbook1st ed.The CRC Handbook of Mechanical Engineering
- Civil Engineering Reference Manual14th ed.Civil Engineering Reference Manual for the PE Exam
- Concepts and Applications of Finite Element Analysis4th ed.Concepts and Applications of Finite Element Analysis
- Contact Mechanics1st ed.Contact Mechanics
- Crane TP-4102018 ed.Flow of Fluids Through Valves, Fittings and Pipe (Technical Paper No. 410)
- Design of Machinery6th ed.Design of Machinery: An Introduction to the Synthesis and Analysis of Mechanisms and Machines
- Design of Welded Structures1st ed.Design of Welded Structures
- Dubbel26th ed.Dubbel Taschenbuch für den Maschinenbau
- Dudley's Handbook of Practical Gear Design and Manufacture3rd ed.Dudley's Handbook of Practical Gear Design and Manufacture
- Fluid Mechanics (White)9th ed.Fluid Mechanics
- Fluid Mechanics and Thermodynamics of Turbomachinery5th ed.Fluid Mechanics and Thermodynamics of Turbomachinery
- Formulas for Natural Frequency and Mode ShapereprintFormulas for Natural Frequency and Mode Shape
- Formulas for Stress, Strain, and Structural Matrices2nd ed.Formulas for Stress, Strain, and Structural Matrices
- Fracture Mechanics: Fundamentals and Applications4th ed.Fracture Mechanics: Fundamentals and Applications
- Fundamentals of Heat and Mass Transfer8th ed.Fundamentals of Heat and Mass Transfer
- Fundamentals of Machine Component Design7th ed.Fundamentals of Machine Component Design
- Handbook of Hydraulic Resistance4th ed.Handbook of Hydraulic Resistance
- IOGP 373-7-2September 2019Geomatics Guidance Note 7, part 2: Coordinate Conversions and Transformations including Formulas
- Machinery's Handbook31st ed.Machinery's Handbook
- Marks' Standard Handbook for Mechanical Engineers12th ed.Marks' Standard Handbook for Mechanical Engineers
- Materials Selection in Mechanical Design5th ed.Materials Selection in Mechanical Design
- Mechanical Behavior of Materials5th ed.Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture, and Fatigue
- Mechanical Engineering Reference Manual13th ed.Mechanical Engineering Reference Manual for the PE Exam
- Mechanical Springs (Wahl)2nd ed.Mechanical Springs
- Mechanical Vibrations (Den Hartog)4th ed. (Dover reprint)Mechanical Vibrations
- Mechanics of Materials (Beer)8th ed.Mechanics of Materials
- Mechanics of Materials (Gere)9th ed.Mechanics of Materials
- Metal Fatigue in Engineering2nd ed.Metal Fatigue in Engineering
- Norton Machine Design6th ed.Machine Design: An Integrated Approach
- Peterson's Stress Concentration Factors4th ed.Peterson's Stress Concentration Factors
- Pressure Vessel Design Manual4th ed.Pressure Vessel Design Manual
- Pressure Vessel Handbook14th ed.Pressure Vessel Handbook
- Roark's Formulas for Stress and Strain9th ed.Roark's Formulas for Stress and Strain
- Rolling Bearing Analysis5th ed.Rolling Bearing Analysis (2 vols.)
- Roloff/Matek Maschinenelementecurrent ed.Roloff/Matek Maschinenelemente: Normung, Berechnung, Gestaltung
- Shigley's Mechanical Engineering Design11th ed.Shigley's Mechanical Engineering Design
- Soil Mechanics in Engineering Practice3rd ed.Soil Mechanics in Engineering Practice
- Stahlbau-Kalender2015Stahlbau-Kalender 2015: Eurocode 3 – Grundnorm, Leichtbau
- Standard Handbook of Machine Design3rd ed.Standard Handbook of Machine Design
- Steel Structures: Design and Behavior5th ed.Steel Structures: Design and Behavior
- Theory of Elastic Stability2nd ed.Theory of Elastic Stability
- Theory of Plates and Shells2nd ed.Theory of Plates and Shells
- Vibration of PlatesNASA SP-160Vibration of Plates
- swisstopo Formulas and constantsDecember 2016Formulas and constants for the calculation of the Swiss conformal cylindrical projection and for the transformation between coordinate systems
Loads and actions
8
- ASCE 372014Design Loads on Structures during Construction
- EN 1991-1-32003+A1:2015Eurocode 1: Actions on structures — Part 1-3: General actions — Snow loads
- EN 1991-1-52003Eurocode 1: Actions on structures — Part 1-5: General actions — Thermal actions
- EN 1991-1-62005Eurocode 1: Actions on structures — Part 1-6: General actions — Actions during execution
- EN 1991-1-72006+A1:2014Eurocode 1: Actions on structures — Part 1-7: General actions — Accidental actions
- EN 1991-22003Eurocode 1: Actions on structures — Part 2: Traffic loads on bridges
- EN 1991-42006Eurocode 1: Actions on structures — Part 4: Silos and tanks
- ISO 43542009Wind actions on structures
Bridges
2
Masonry and timber
11
- AWC NDS2024National Design Specification (NDS) for Wood Construction
- EN 14081-12016+A1:2019Timber structures — Strength graded structural timber with rectangular cross section — Part 1: General requirements
- EN 1995-1-22004Eurocode 5: Design of timber structures — Part 1-2: General — Structural fire design
- EN 1995-22004Eurocode 5: Design of timber structures — Part 2: Bridges
- EN 1996-1-12005+A1:2012Eurocode 6: Design of masonry structures — Part 1-1: General rules for reinforced and unreinforced masonry structures
- EN 1996-1-22005Eurocode 6: Design of masonry structures — Part 1-2: General rules — Structural fire design
- EN 1996-22006Eurocode 6: Design of masonry structures — Part 2: Design considerations, selection of materials and execution of masonry
- EN 1996-32006Eurocode 6: Design of masonry structures — Part 3: Simplified calculation methods for unreinforced masonry structures
- EN 771-12011+A1:2015Specification for masonry units — Part 1: Clay masonry units
- EN 771-22011+A1:2015Specification for masonry units — Part 2: Calcium silicate masonry units
- TMS 402/6022022Building Code Requirements and Specification for Masonry Structures
Seismic design
9
- ASCE 412023Seismic Evaluation and Retrofit of Existing Buildings
- EN 151292018Anti-seismic devices
- EN 1998-12004+A1:2013Eurocode 8: Design of structures for earthquake resistance — Part 1: General rules, seismic actions and rules for buildings
- EN 1998-22005Eurocode 8: Design of structures for earthquake resistance — Part 2: Bridges
- EN 1998-32005Eurocode 8: Design of structures for earthquake resistance — Part 3: Assessment and retrofitting of buildings
- EN 1998-42006Eurocode 8: Design of structures for earthquake resistance — Part 4: Silos, tanks and pipelines
- EN 1998-52004Eurocode 8: Design of structures for earthquake resistance — Part 5: Foundations, retaining structures and geotechnical aspects
- EN 1998-62005Eurocode 8: Design of structures for earthquake resistance — Part 6: Towers, masts and chimneys
- ISO 30102017Bases for design of structures — Seismic actions on structures
Fire design and protection
2
Geotechnics and foundations
48
- ASTM D11432026Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load
- ASTM D15562024Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
- ASTM D15572012 (reapproved 2021)Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
- ASTM D15862018Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
- ASTM D18832021Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
- ASTM D21662024Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
- ASTM D22162019Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
- ASTM D24352025Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
- ASTM D24872017 (reapproved 2025)Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
- ASTM D24882026Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
- ASTM D28502026Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
- ASTM D30802023Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
- ASTM D43182026Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- ASTM D47672011 (reapproved 2020)Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
- ASTM D49452026Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
- ASTM D50842024Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
- ASTM D57782020Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
- ASTM D69132017 (reapproved 2025)Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
- ASTM D69382023Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6982012 (reapproved 2021)Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
- ASTM D70122023Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM D79282021Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM D8542023Standard Test Methods for Specific Gravity of Soil Solids by the Water Displacement Method
- EN 120632024Execution of special geotechnical work — Sheet pile walls
- EN 126992015Execution of special geotechnical works — Displacement piles
- EN 141992015Execution of special geotechnical works — Micropiles
- EN 144902010Execution of special geotechnical works — Soil nailing
- EN 15362010+A1:2015Execution of special geotechnical works — Bored piles
- EN 15372013Execution of special geotechnical works — Ground anchors
- EN 15382010+A1:2015Execution of special geotechnical works — Diaphragm walls
- EN 1997-22007Eurocode 7: Geotechnical design — Part 2: Ground investigation and testing
- ISO 14688-12017Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description
- ISO 14688-22017Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification
- ISO 146892017Geotechnical investigation and testing — Identification, description and classification of rock
- ISO 17892-12014Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content
- ISO 17892-102018Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests
- ISO 17892-112019Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests
- ISO 17892-122018Geotechnical investigation and testing — Laboratory testing of soil — Part 12: Determination of liquid and plastic limits
- ISO 17892-42016Geotechnical investigation and testing — Laboratory testing of soil — Part 4: Determination of particle size distribution
- ISO 17892-52017Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test
- ISO 17892-72017Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test
- ISO 17892-92018Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated triaxial compression tests on water saturated soils
- ISO 22475-12021Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 1: Technical principles for the sampling of soil, rock and groundwater
- ISO 22476-12022Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test
- ISO 22476-22005Geotechnical investigation and testing — Field testing — Part 2: Dynamic probing
- ISO 22476-32005Geotechnical investigation and testing — Field testing — Part 3: Standard penetration test
- ISO 22477-12018Geotechnical investigation and testing — Testing of geotechnical structures — Part 1: Testing of piles: static compression load testing
- ASTM D46332016 withdrawnStandard Test Method for Energy Measurement for Dynamic Penetrometers
Electrical installations
54
- BS 76712018+A4:2026Requirements for Electrical Installations. IET Wiring Regulations
- DIN 436701975Aluminium busbars — Design for continuous current
- DIN 436711975Copper busbars — Design for continuous current
- EMCD 2014/30/EU2014Directive 2014/30/EU on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (EMC Directive)
- EN 50110-12023Operation of electrical installations — Part 1: General requirements
- IEC 60034-122024Rotating electrical machines — Part 12: Starting performance of single-speed three-phase cage induction motors
- IEC 60034-2-12024Rotating electrical machines — Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
- IEC 60034-222009Rotating electrical machines — Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
- IEC 600382009IEC standard voltages
- IEC 600632015Preferred number series for resistors and capacitors
- IEC 60079-02026Explosive atmospheres — Part 0: Equipment — General requirements
- IEC 60079-12014Explosive atmospheres — Part 1: Equipment protection by flameproof enclosures "d"
- IEC 60079-10-12020Explosive atmospheres — Part 10-1: Classification of areas — Explosive gas atmospheres
- IEC 60079-10-22015Explosive atmospheres — Part 10-2: Classification of areas — Explosive dust atmospheres
- IEC 60079-112023Explosive atmospheres — Part 11: Equipment protection by intrinsic safety "i"
- IEC 60079-142024Explosive atmospheres — Part 14: Electrical installations design, selection and installation of equipment, including initial inspection
- IEC 60079-172023Explosive atmospheres — Part 17: Electrical installations inspection and maintenance
- IEC 60079-72015+AMD1:2017Explosive atmospheres — Part 7: Equipment protection by increased safety "e"
- IEC 602282023Conductors of insulated cables
- IEC 60269-12024Low-voltage fuses — Part 1: General requirements
- IEC 60287-1-12023Electric cables — Calculation of the current rating — Part 1-1: Current rating equations (100 % load factor) and calculation of losses — General
- IEC 60364-12025Low-voltage electrical installations — Part 1: Fundamental principles, assessment of general characteristics, definitions
- IEC 60364-4-412005+AMD1:2017Low-voltage electrical installations — Part 4-41: Protection for safety — Protection against electric shock
- IEC 60364-4-432023Low-voltage electrical installations — Part 4-43: Protection for safety — Protection against overcurrent
- IEC 60364-5-522009+AMD1:2024Low-voltage electrical installations — Part 5-52: Selection and erection of electrical equipment — Wiring systems
- IEC 60364-5-542011Low-voltage electrical installations — Part 5-54: Selection and erection of electrical equipment — Earthing arrangements and protective conductors
- IEC 60364-62016Low-voltage electrical installations — Part 6: Verification
- IEC 60364-7-7122017Low-voltage electrical installations — Part 7-712: Requirements for special installations or locations — Solar photovoltaic (PV) power supply systems
- IEC 60479-12018Effects of current on human beings and livestock — Part 1: General aspects
- IEC 60502-12021Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) — Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
- IEC 605291989+AMD2:2013Degrees of protection provided by enclosures (IP Code)
- IEC 60898-12015Electrical accessories — Circuit-breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for a.c. operation
- IEC 60947-22024Low-voltage switchgear and controlgear — Part 2: Circuit-breakers
- IEC 61000-6-22016Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity standard for industrial environments
- IEC 61000-6-42018Electromagnetic compatibility (EMC) — Part 6-4: Generic standards — Emission standard for industrial environments
- IEC 611402016Protection against electric shock — Common aspects for installation and equipment
- IEC 61439-12020Low-voltage switchgear and controlgear assemblies — Part 1: General rules
- IEC 61439-22020Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies
- IEC 62305-12024Protection against lightning — Part 1: General principles
- IEC 62305-32024Protection against lightning — Part 3: Physical damage to structures and life hazard
- IEC 62395-22013Electrical resistance trace heating systems for industrial and commercial applications — Part 2: Application guide for system design, installation and maintenance
- IPC 2141A2004Design Guide for High-Speed Controlled Impedance Circuit Boards
- IPC 21522009Standard for Determining Current Carrying Capacity in Printed Board Design
- IPC 2221Generic Standard on Printed Board Design
- ISO 8528-12005Reciprocating internal combustion engine driven alternating current generating sets — Part 1: Application, ratings and performance
- ISO 8528-32005Reciprocating internal combustion engine driven alternating current generating sets — Part 3: Alternating current generators for generating sets
- ISO 8528-52013Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets
- LVD 2014/35/EU2014Directive 2014/35/EU on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (Low Voltage Directive)
- NEMA 2502020Enclosures for Electrical Equipment (1000 Volts Maximum)
- NFPA 702026National Electrical Code (NEC)
- NFPA 70B2023Standard for Electrical Equipment Maintenance
- NFPA 70E2024Standard for Electrical Safety in the Workplace
- UL 508A2018Standard for Industrial Control Panels
- IEEE 1422007 withdrawnIEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems
Power systems
23
- EN 505222022Earthing of power installations exceeding 1 kV a.c.
- IEC 60076-12011Power transformers — Part 1: General
- IEC 60076-112018Power transformers — Part 11: Dry-type transformers
- IEC 60076-22011Power transformers — Part 2: Temperature rise for liquid-immersed transformers
- IEC 60076-52006Power transformers — Part 5: Ability to withstand short circuit
- IEC 60076-72018Power transformers — Part 7: Loading guide for mineral-oil-immersed power transformers
- IEC 60865-12011Short-circuit currents — Calculation of effects — Part 1: Definitions and calculation methods
- IEC 60896-212004Stationary lead-acid batteries — Part 21: Valve regulated types — Methods of test
- IEC 60909-02016Short-circuit currents in three-phase a.c. systems — Part 0: Calculation of currents
- IEC 611161992Electromechanical equipment guide for small hydroelectric installations
- IEC 61936-12021Power installations exceeding 1 kV AC and 1,5 kV DC — Part 1: AC
- IEC 62271-2002021+AMD1:2024High-voltage switchgear and controlgear — Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
- IEC TR 60865-22015Short-circuit currents — Calculation of effects — Part 2: Examples of calculation
- IEC TR 60909-22008Short-circuit currents in three-phase a.c. systems — Part 2: Data of electrical equipment for short-circuit current calculations
- IEC TR 60909-42021Short-circuit currents in three-phase a.c. systems — Part 4: Examples for the calculation of short-circuit currents
- IEEE 11152014IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
- IEEE 15472018IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
- IEEE 15842018IEEE Guide for Performing Arc-Flash Hazard Calculations
- IEEE 4852020IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
- IEEE 5192022IEEE Standard for Harmonic Control in Electric Power Systems
- IEEE 802013IEEE Guide for Safety in AC Substation Grounding
- IEEE 812025IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
- IEEE C57.12.002021IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Explosive atmospheres
13
- API RP 5002023Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2
- API RP 5052025Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2
- ATEX 1999/92/EC1999Directive 1999/92/EC on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres
- ATEX 2014/34/EU2014Directive 2014/34/EU on equipment and protective systems intended for use in potentially explosive atmospheres (ATEX)
- EN 1127-12019Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology
- EN 144912012Dust explosion venting protective systems
- EN 149942007Gas explosion venting protective systems
- IEC 60079-30-12015Explosive atmospheres — Part 30-1: Electrical resistance trace heating — General and testing requirements
- IEC 60079-30-22015Explosive atmospheres — Part 30-2: Electrical resistance trace heating — Application guide for design, installation and maintenance
- ISO 80079-362016Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements
- NFPA 682023Standard on Explosion Protection by Deflagration Venting
- NFPA 692024Standard on Explosion Prevention Systems
- IEC 60079-20-12010 withdrawnExplosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data
Process safety and relief
27
- API 520-27th ed. 2020Sizing, Selection, and Installation of Pressure-relieving Devices — Part II: Installation
- API 5275th ed. 2020 (R2025)Seat Tightness of Pressure Relief Valves
- API 5374th ed. 2024Flare Details for Petroleum, Petrochemical, and Natural Gas Industries
- API 5605th ed. 2016Fired Heaters for General Refinery Service
- API 5713rd ed. 2020Damage Mechanisms Affecting Fixed Equipment in the Refining Industry
- API 5765th ed. 2024Inspection of Pressure-relieving Devices
- API 5804th ed. 2023Elements of a Risk-Based Inspection Program
- API 5814th ed. 2025Risk-Based Inspection Methodology
- API 6186th ed. 2024Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services
- API 6609th ed. 2015Shell-and-Tube Heat Exchangers
- API 6617th ed. 2013 (R2024)Petroleum, Petrochemical, and Natural Gas Industries—Air-cooled Heat Exchangers
- API RP 7524th ed. 2024Management of Hazards Associated with Location of Process Plant Buildings
- API RP 7532024Management of Hazards Associated with Location of Process Plant Portable Buildings
- API RP 7543rd ed. 2021Process Safety Performance Indicators for the Refining and Petrochemical Industries
- ASME BPE2024Bioprocessing Equipment
- IEC 60534-12005Industrial-process control valves — Part 1: Control valve terminology and general considerations
- IEC 60534-2-12011Industrial-process control valves — Part 2-1: Flow capacity — Sizing equations for fluid flow under installed conditions
- IEC 60534-2-42009Industrial-process control valves — Part 2-4: Flow capacity — Inherent flow characteristics and rangeability
- IEC 60534-8-32010Industrial-process control valves — Part 8-3: Noise considerations — Control valve aerodynamic noise prediction method
- IEC 60534-8-42015Industrial-process control valves — Part 8-4: Noise considerations — Prediction of noise generated by hydrodynamic flow
- IEC 61511-12016+AMD1:2017Functional safety — Safety instrumented systems for the process industry sector — Part 1: Framework, definitions, system, hardware and application programming requirements
- IEC 618822016Hazard and operability studies (HAZOP studies) — Application guide
- ISO 168122019Petroleum, petrochemical and natural gas industries — Shell-and-tube heat exchangers
- ISO 232512006Petroleum, petrochemical and natural gas industries — Pressure-relieving and depressuring systems
- OSHA 29 CFR 1910.1191992Process safety management of highly hazardous chemicals
- Seveso III 2012/18/EU2012Directive 2012/18/EU on the control of major-accident hazards involving dangerous substances (Seveso III)
- TEMA10th ed. 2019Standards of the Tubular Exchanger Manufacturers Association
Storage tanks
4
- API 23505th ed. 2020 (R2025)Overfill Prevention for Storage Tanks in Petroleum Facilities
- EN 140152004Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
- ISO 283002008Petroleum, petrochemical and natural gas industries — Venting of atmospheric and low-pressure storage tanks
- NFPA 302024Flammable and Combustible Liquids Code
Tunnelling and mining
25
- BS 61642019Health and safety in tunnelling in the construction industry — Code of practice
- BTS Closed-Face Tunnelling Machinery2005Closed-Face Tunnelling Machinery and Ground Stability: A Guideline for Best Practice
- BTS Specification for Tunnelling3rd ed. 2010Specification for Tunnelling
- CSA M424.2Non-rail-bound diesel-powered machines for use in non-gassy underground mines
- DAUB TBM selection2025Recommendations for the Selection of Tunnel Boring Machines
- EN 121112014Tunnelling machines — Road headers and continuous miners — Safety requirements
- EN 14487-12022Sprayed concrete — Part 1: Definitions, specifications and conformity
- EN 14488-12005Testing sprayed concrete — Part 1: Sampling fresh and hardened concrete
- EN 161912014Tunnelling machinery — Safety requirements
- EN 17102005+A1:2008Equipment and components intended for use in potentially explosive atmospheres in underground mines
- EN 1889-12011Machines for underground mines — Mobile machines working underground — Safety — Part 1: Rubber tyred vehicles
- ISO 177572019Earth-moving machinery and mining — Autonomous and semi-autonomous machine system safety
- ISO 192962018Mining — Mobile machines working underground — Machine safety
- ISO 194342017Mining — Classification of mine accidents
- ITA WG2 Guidelines for Tunnelling Risk Management2004Guidelines for Tunnelling Risk Management
- ITA WG2 Guidelines for the Design of Shield Tunnel Lining2000Guidelines for the Design of Shield Tunnel Lining
- ITIG Code of Practice2nd ed. 2012A Code of Practice for Risk Management of Tunnel Works
- MSHA 30 CFR Part 57eCFR, amended continuallySafety and Health Standards—Underground Metal and Nonmetal Mines
- MSHA 30 CFR Part 75eCFR, amended continuallyMandatory Safety Standards—Underground Coal Mines
- SIA 1972004Projektierung Tunnel — Grundlagen
- SIA 197/12004Projektierung Tunnel — Bahntunnel
- SIA 197/22004Projektierung Tunnel — Strassentunnel
- SIA 1982004Untertagbau — Ausführung
- EN 123362005+A1:2008 withdrawnTunnelling machines — Shield machines, thrust boring machines, auger boring machines, lining erection equipment — Safety requirements
- EN 8151996+A2:2008 withdrawnSafety of unshielded tunnel boring machines and rodless shaft boring machines for rock — Safety requirements
HVAC and ventilation
30
- ASHRAE 152022Safety Standard for Refrigeration Systems
- ASHRAE 1702021Ventilation of Health Care Facilities
- ASHRAE 342022Designation and Safety Classification of Refrigerants
- ASHRAE 52.22017Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
- ASHRAE 552023Thermal Environmental Conditions for Human Occupancy
- ASHRAE 62.12025Ventilation and Acceptable Indoor Air Quality
- ASHRAE 62.22025Ventilation and Acceptable Indoor Air Quality in Residential Buildings
- ASHRAE Handbook—Fundamentals2025ASHRAE Handbook—Fundamentals
- CIBSE Guide A8th ed. 2015Environmental design
- EN 128282012+A1:2014Heating systems in buildings — Design for water-based heating systems
- EN 130532019Ventilation for buildings — Air handling units — Rating and performance for units, components and sections
- EN 16798-12019Energy performance of buildings — Ventilation for buildings — Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics — Module M1-6
- EN 16798-32017Energy performance of buildings — Ventilation for buildings — Part 3: For non-residential buildings — Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4)
- EN 1822-12019High efficiency air filters (EPA, HEPA and ULPA) — Part 1: Classification, performance testing, marking
- EN 18862007Ventilation for buildings — Air handling units — Mechanical performance
- EN 378-12016+A1:2020Refrigerating systems and heat pumps — Safety and environmental requirements — Part 1: Basic requirements, definitions, classification and selection criteria
- IMC2024International Mechanical Code
- ISO 102112017Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
- ISO 133702017Thermal performance of buildings — Heat transfer via the ground — Calculation methods
- ISO 14644-12015Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness by particle concentration
- ISO 16890-12016Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based on particulate matter efficiency (ePM)
- ISO 52016-12017Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 1: Calculation procedures
- ISO 69462017Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods
- ISO 77302005Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
- VDI 4640-22019Thermal use of the underground — Ground source heat pump systems
- VDI 6022-12018Ventilation and indoor-air quality — Hygiene requirements for ventilation and air-conditioning systems and units (VDI Ventilation Code of Practice)
- Geothermal Heating and Cooling: Design of Ground-Source Heat Pump Systems1st ed.Geothermal Heating and Cooling: Design of Ground-Source Heat Pump Systems
- EN 137792007 withdrawnVentilation for non-residential buildings — Performance requirements for ventilation and room-conditioning systems
- EN 152512007 withdrawnIndoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics
- ISO 78071983 withdrawnAir distribution — Straight circular sheet metal ducts with a lock type spiral seam and straight rectangular sheet metal ducts — Dimensions
Building energy
4
- ASHRAE 90.12025Energy Standard for Sites and Buildings Except Low-Rise Residential Buildings
- IECC2024International Energy Conservation Code
- ISO 500012018+A1:2024Energy management systems — Requirements with guidance for use
- ISO 52000-12017Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures
Water and drainage
12
- DIN 1988-3002012Codes of practice for drinking water installations — Part 300: Pipe sizing; DVGW code of practice
- EN 12056-22000Gravity drainage systems inside buildings — Part 2: Sanitary pipework, layout and calculation
- EN 12056-42000Gravity drainage systems inside buildings — Part 4: Wastewater lifting plants — Layout and calculation
- EN 17172000Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
- EN 806-12001Specifications for installations inside buildings conveying water for human consumption — Part 1: General
- EN 806-22005Specifications for installations inside buildings conveying water for human consumption — Part 2: Design
- EN 806-32006Specifications for installations inside buildings conveying water for human consumption — Part 3: Pipe sizing — Simplified method
- EN 806-42010Specifications for installations inside buildings conveying water for human consumption — Part 4: Installation
- EN 806-52012Specifications for installations inside buildings conveying water for human consumption — Part 5: Operation and maintenance
- HI 9.82018Rotodynamic Pumps for Pump Intake Design
- ISO 14382017Hydrometry — Open channel flow measurement using thin-plate weirs
- ISO 98261992Measurement of liquid flow in open channels — Parshall and SANIIRI flumes
Sources and notes
This is a catalogue of standards and reference books, not a library: each entry gives the number, the edition we know of, the official title, whether it is current, what it replaced or what replaced it, and a short summary of its scope written by us. No standard's text, tables or figures are reproduced, and nothing here links to copies of documents. Buy or borrow the document from its publisher before you use it.
Where the entries come from
- A personal engineering library of purchased standards, catalogues and books: numbers, editions and titles read from the documents' title pages.
- Every standard cited by the calculators on lu.ca/calc. The "Used in" links are found by scanning each calculator's sources for the number, so they stay in step with the tools.
- The publishers' public catalogues for titles, editions and status: ISO Online Browsing Platform (iso.org/obp), the IEC webstore, CEN, CENELEC and DIN Media, BSI, ASME, ASTM, API, AWS, SAE, IEEE, NFPA, ASHRAE, ACI, AISC, ASCE, ICC and the others named on each entry. Where an edition was checked, the entry says when and where; where it could not be confirmed, it says so.
How to read an entry
- Edition is the latest edition we could confirm when the catalogue was compiled (see the date below). Standards are revised every few years; ASTM ones often yearly. Always check the publisher for the current edition before you cite one.
- Withdrawn means the publisher withdrew it; superseded means a newer document replaced it. Old numbers stay in the catalogue because drawings and specifications still call them up (DIN 912, DIN 931, ASTM A325).
- Equivalents are marked "identical" only where the documents are the same text (for example EN ISO adoptions of ISO standards). "Similar, not identical" means the subject is the same but values, rules or test details differ: do not swap one for the other on a drawing without checking.
- EN ISO and DIN EN ISO numbers are listed under the ISO number; DIN EN and BS EN numbers under the EN number; EN and EN IEC adoptions of IEC standards under the IEC number. Search finds them by any of these spellings.
- Disciplines group the entries the way engineers work: mechanical, civil and structural, geotechnical, electrical, chemical and process, mining and tunnelling, HVAC and building services, welding, materials, quality and GD&T, and lifting. A document can sit in more than one (a pressure vessel code is mechanical and process).
- Eurocodes are listed in their first-generation editions, which stay in force until each country withdraws them after the second generation (EN 1990:2023, EN 1997-1:2024 and the rest) is published nationally.
Search
- Numbers work in any spelling: "iso898", "ISO 898-1:2013", "898-1", "DIN EN ISO 4762", "b31.3", "A325", "VDI 2230 Blatt 1". Years and amendments are ignored.
- Words are matched against the number, title, keywords and our summary, in that order of weight, with common synonyms (preload, pretension, clamp load) and small typos allowed.