lu.ca/calc/

O-ring gland

Export

Margins

MS = allowable ÷ actual − 1 (for minimums, actual ÷ allowable − 1). Zero or more passes. Design-chart recommendations are shown but do not set the minimum. Hover a check to see that failure.

Tolerance stack

each tolerance taken to its worst end, one after the other

Extrusion

Parker Figure 3-2, digitised · drag the pressure

O-ring sizes

AS568 and ISO 3601-1, searchable both ways: type a dash number (214, 2-214) or sizes (25 x 3.55, 1 in, od 30)

Calculation

every step with this gland's numbers

Sources and assumptions

Suggest an O-ring