<?xml version="1.0" encoding="utf-8"?>
<feed xmlns="http://www.w3.org/2005/Atom">
  <title>lu.ca engineering calculators: what’s new</title>
  <link href="https://lu.ca/calc/"/>
  <link rel="self" href="https://lu.ca/calc/news.xml"/>
  <id>https://lu.ca/calc/news.xml</id>
  <updated>2026-11-19T00:00:00Z</updated>
  <author><name>Luca Entremont</name></author>
  <entry>
    <title>Colour palettes: Palettes from one base colour in Oklab (distinct series, even hues or shades), sequential and diverging ramps</title>
    <link href="https://lu.ca/calc/colours/"/>
    <id>https://lu.ca/calc/colours/#v1</id>
    <updated>2026-11-19T00:00:00Z</updated>
    <summary>First version: palettes from one base colour in Oklab (distinct series, even hues or shades), sequential and diverging ramps, table neutrals and status colours with light and dark variants; WCAG 2.2 contrast for every fill, colour-vision simulation (Machado 2009) with ΔE OK and ΔE2000 checks; preview table and chart; hex, RGB and CSS lists, Excel and Google Sheets colour-scale recipes, Office theme colours (.xml), a workbook with the rules (.xlsx) and CSV; callouts, labels, badges and ISO 3864 style signs for slides as PNG or SVG; Okabe and Ito, Paul Tol, lu.ca margins, ISO 3864 and ANSI Z535.1 presets; all 216 RAL CLASSIC colours with cited uses (safety signs, hazard stripes, extinguishers, gas cylinders, pipes, controls and more).</summary>
  </entry>
  <entry>
    <title>Symbols: 713 more drawing symbols on the electrical and building side</title>
    <link href="https://lu.ca/calc/symbols/"/>
    <id>https://lu.ca/calc/symbols/#v10</id>
    <updated>2026-11-19T00:00:00Z</updated>
    <summary>713 more drawing symbols on the electrical and building side. New sets: Power systems (49: IEC 60617 generating stations, substations, lines, cables, busbar trunking, single-line elements), Flowcharts and BPMN (70: ISO 5807 clause 9 symbols, BPMN 2.0.1 events, activities, gateways, flows), Architecture and building (75: ISO 7519 doors, windows, stairs, openings, arrows; all ISO 4067-2 sanitary appliances in plan and elevation; window elevations, walls, columns, shafts, level marks), Survey and maps (55: ANSI Y32.7 roads, fences, hydrography, relief, landmarks, wells), Maths and physics (65: vectors, fields, phasors, waveforms, optics), Fire protection plans (66: ISO 6790 shapes, elements and complete symbols) and Weather maps (50: sky cover, fronts, present weather, wind barbs). Added to Electrical (161: switches, relay coils, measuring relays, machines and windings, instruments, installation symbols, IEC 60617-2 actuators and qualifiers, ANSI/IEEE 315 forms, each by IEC 60617 registration number), Electronics (83: passives, semiconductors, IEC 60617-12/-13 function blocks, filters and signal processing, antennas, connectors), Control (34: IEC 61131-3 tables, GRAFCET) and Safety (ISO 3864-3 arrows). The page now loads a search index and fetches each set only when it is shown.</summary>
  </entry>
  <entry>
    <title>Symbols: Drawing annotation: ISO 13715 edge symbols (basic, +, −, ± with size) and ISO 6411 centre-hole indications (required, not permitted)</title>
    <link href="https://lu.ca/calc/symbols/"/>
    <id>https://lu.ca/calc/symbols/#v9</id>
    <updated>2026-11-19T00:00:00Z</updated>
    <summary>Drawing annotation: ISO 13715 edge symbols (basic, +, −, ± with size) and ISO 6411 centre-hole indications (required, not permitted).</summary>
  </entry>
  <entry>
    <title>Symbols: Drawing symbols: new set Equipment symbols</title>
    <link href="https://lu.ca/calc/symbols/"/>
    <id>https://lu.ca/calc/symbols/#v8</id>
    <updated>2026-11-19T00:00:00Z</updated>
    <summary>Drawing symbols: new set Equipment symbols (39 ISO 7000 registered symbols for motion, drives, locking, braking, filling, cooling, temperature, level, weight and lifting, each with its number, drawn in the library style); welding: nine more ISO 2553:2013 symbols (fusion spot and seam, edge, flanged, stake, root reinforcement, unspecified backing, weld between two points, staggered); section lining tiles; 13 rigging items and sling hitches; 12 ISO 6412-3 ventilation and drainage terminals; six HVAC units.</summary>
  </entry>
  <entry>
    <title>Threads and tap drills: Copy values: click or tap any number to copy it</title>
    <link href="https://lu.ca/calc/threads/"/>
    <id>https://lu.ca/calc/threads/#v8</id>
    <updated>2026-11-19T00:00:00Z</updated>
    <summary>Copy values: click or tap any number to copy it (the number as shown, without its unit; Alt-click or the toast adds the unit), copy buttons for every table row and table as cells that paste into a spreadsheet, keyboard copy; selecting text in the tap-drill and thread tables no longer redraws the page and loses the selection</summary>
  </entry>
  <entry>
    <title>Symbols: P&amp;ID: 67 more ISO 10628-2:2012 symbols with item and registration numbers</title>
    <link href="https://lu.ca/calc/symbols/"/>
    <id>https://lu.ca/calc/symbols/#v7</id>
    <updated>2026-11-19T00:00:00Z</updated>
    <summary>P&amp;ID: 67 more ISO 10628-2:2012 symbols with item and registration numbers: separators, scrubbers and precipitators, centrifuges, driers, crushers and mills, mixers, kneader, extruder, progressive-cavity pump, screw and liquid-ring compressors, conveyors and elevators, crane, lift, forklift, trucks, tank car, ship, generators and AC/DC motors, gearbox, vessel supports, manhole, column internals and eight agitator types.</summary>
  </entry>
  <entry>
    <title>Symbols: P&amp;ID: 72 more symbols. ISA-5.1-2009</title>
    <link href="https://lu.ca/calc/symbols/"/>
    <id>https://lu.ca/calc/symbols/#v6</id>
    <updated>2026-11-19T00:00:00Z</updated>
    <summary>P&amp;ID: 72 more symbols. ISA-5.1-2009: the diamond-in-square column is now named for what the 2009 edition says (safety instrumented system or alternate control), every instrument bubble cites its Table 5.1.1 column and row, and the fifth location (behind a local panel) is added; pilot light, common housing, patchboard point, sight and gauge glasses, gauges, thermowell, sample probe, purge, diaphragm seal, the four process-connection types, traced instrument and eight more signal and supply lines. ISO 10628-2:2012: 46 more vessels, columns, heat exchangers, boilers, burners, cooling towers and filters with item and registration numbers.</summary>
  </entry>
  <entry>
    <title>Symbols: Drawing symbols: new set Mechanisms and machine elements</title>
    <link href="https://lu.ca/calc/symbols/"/>
    <id>https://lu.ca/calc/symbols/#v5</id>
    <updated>2026-11-19T00:00:00Z</updated>
    <summary>Drawing symbols: new set Mechanisms and machine elements (62: ISO 3952 motions, kinematic pairs, links, gear and cam mechanisms, Geneva and ratchet, couplings and clutches, belt and chain drives; ISO 8826 rolling bearings; ISO 2162-1 springs; ISO 2203 gear conventions) and 46 more ISO 1219-1:2012 fluid-power symbols with clause and registration number (couplings, indicators, filters, coolers, accumulators, intensifier, transmission, pneumatic AND and quick-exhaust valves, bellows and hose cylinders, gripper, FRL, control mechanisms).</summary>
  </entry>
  <entry>
    <title>Surface finish: Conversions and the symbol, spot by spot</title>
    <link href="https://lu.ca/calc/surface/"/>
    <id>https://lu.ca/calc/surface/#v3</id>
    <updated>2026-11-19T00:00:00Z</updated>
    <summary>Conversions and the symbol, spot by spot: type any value in any system (N7, 1.6 µm, 63 µin, Rz 12, 125 rms, CLA 32) and read it in µm, µin, N-grade, cut-off and the Rz, Rq, Rt and Rmax of your profile; click-to-copy tables of grades and units (ISO 1302 Table I.2), the Ra ratios of turned, ground, honed and ideal profiles from the page's own engine next to the published Rt ≈ 4 Ra (never one factor), old and national names (CLA, AA, RMS, Ry, RzJIS, Ra75, Ramax; B46.1, ISO 1302 Annexes H and I, JIS B 0601) and the cut-off with B46.1 inch values. A large symbol in six editions (ISO 1302:2002, ISO 21920-1:2021 not yet verified, ASME Y14.36-2018 and M-1996, ISO 1302:1992 and 1978) where every position explains itself with its clause, a builder that draws it live, reads it in plain English, checks it against the edition and exports SVG or transparent PNG at 1×, 2× and 4×</summary>
  </entry>
  <entry>
    <title>Symbols: 193 more drawing symbols (947 in 18 sets)</title>
    <link href="https://lu.ca/calc/symbols/"/>
    <id>https://lu.ca/calc/symbols/#v4</id>
    <updated>2026-11-15T00:00:00Z</updated>
    <summary>193 more drawing symbols (947 in 18 sets). New sets: Mechanics and statics (49: the centre-of-gravity disc, ISO 7000 reg. no. 0627, centroid, buoyancy, metacentre, shear centre; fixed, pinned, roller, sliding, guided and spring supports; point, distributed, triangular loads, moments, torque, gravity; axis triads; springs, dampers, masses, ISO 3952 links and joints), Drawing annotation (34: ASME Y14.2 arrowheads and leaders, ASME Y14.3 projection symbols, reference arrows, section and detail identification, ASME Y14.35 revision symbol, arrows and callouts), Lifting, handling and packaging (27: all 17 ISO 780:2015 marks with their ISO 7000 numbers, lifting points, hooks, shackles, slings) and Safety sign shapes (9: ISO 3864-1 shapes, combination and multiple signs, hazard stripes). Added to P&amp;ID (ISA-5.1 Table 5.2.3 flow and level elements, Table 5.4.2 actuators), electrical (IEC 60617-11 installation symbols), electronics (IEC 60617-6 converters, thermocouple, microphone, earphone), fluid power (5/2 and 5/3 valves, rodless cylinder, shut-off valve), HVAC, piping and civil (ISO 4463-2 setting-out points). Tests: valid SVG, everything inside its box, house stroke weights.</summary>
  </entry>
  <entry>
    <title>Threads and tap drills: Dark theme: the finder, the tables, the tags and the axial section follow the site's Light, Dark or Auto choice</title>
    <link href="https://lu.ca/calc/threads/"/>
    <id>https://lu.ca/calc/threads/#v7</id>
    <updated>2026-11-08T00:00:00Z</updated>
    <summary>Dark theme: the finder, the tables, the tags and the axial section follow the site's Light, Dark or Auto choice (nut and bolt keep their materials on the graphite paper); PDF, PNG and copied reports stay light</summary>
  </entry>
  <entry>
    <title>Bolt pattern: Report export: load names are escaped in the report's loads list, so a name with &amp;, &lt; or a quote no longer breaks the PNG and PDF export</title>
    <link href="https://lu.ca/calc/2d-bolts/"/>
    <id>https://lu.ca/calc/2d-bolts/#v23</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Report export: load names are escaped in the report's loads list, so a name with &amp;, &lt; or a quote no longer breaks the PNG and PDF export</summary>
  </entry>
  <entry>
    <title>Bolt pattern, 3D: The bolt-type pill in the bolt table is a little wider, so “A 3/8-16” is no longer cut at its last character</title>
    <link href="https://lu.ca/calc/3d-bolts/"/>
    <id>https://lu.ca/calc/3d-bolts/#v20</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>The bolt-type pill in the bolt table is a little wider, so “A 3/8-16” is no longer cut at its last character</summary>
  </entry>
  <entry>
    <title>Hydraulic cylinder: Formula steps: a unit with a superscript 3 (in³) closes its \text{} group and sets ^{3} in math mode</title>
    <link href="https://lu.ca/calc/cylinder/"/>
    <id>https://lu.ca/calc/cylinder/#v18</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: a unit with a superscript 3 (in³) closes its \text{} group and sets ^{3} in math mode; KaTeX could not parse ^3 inside \text{}</summary>
  </entry>
  <entry>
    <title>Hydraulic cylinder: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/cylinder/"/>
    <id>https://lu.ca/calc/cylinder/#v17</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Weld group: Load names are escaped in the drawing's labels, so a name with &amp;, &lt; or a quote no longer breaks the PNG and PDF export</title>
    <link href="https://lu.ca/calc/weld/"/>
    <id>https://lu.ca/calc/weld/#v15</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Load names are escaped in the drawing's labels, so a name with &amp;, &lt; or a quote no longer breaks the PNG and PDF export</summary>
  </entry>
  <entry>
    <title>Stress concentration: Export: the cross-drilled hole preset no longer hangs the PDF and PNG export</title>
    <link href="https://lu.ca/calc/kt/"/>
    <id>https://lu.ca/calc/kt/#v15</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Export: the cross-drilled hole preset no longer hangs the PDF and PNG export (a formula cut to 60 characters ended in a superscript mark, and the report's formula setter looped on it); cut formulas end in an ellipsis and drop leftover LaTeX spacing</summary>
  </entry>
  <entry>
    <title>Stress concentration: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/kt/"/>
    <id>https://lu.ca/calc/kt/#v14</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Pipe and hose pressure drop: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/pipe/"/>
    <id>https://lu.ca/calc/pipe/#v10</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Shaft: Report export: “P &lt; 10” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)</title>
    <link href="https://lu.ca/calc/shaft/"/>
    <id>https://lu.ca/calc/shaft/#v8</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Report export: “P &lt; 10” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)</summary>
  </entry>
  <entry>
    <title>Bend allowance and K-factor: Formula steps: the K-factor band (r ≤ 3t) inside \text{} is set in math</title>
    <link href="https://lu.ca/calc/bend/"/>
    <id>https://lu.ca/calc/bend/#v8</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: the K-factor band (r ≤ 3t) inside \text{} is set in math; KaTeX drew a red \le</summary>
  </entry>
  <entry>
    <title>Flat plates: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/plate/"/>
    <id>https://lu.ca/calc/plate/#v7</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Shaft: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/shaft/"/>
    <id>https://lu.ca/calc/shaft/#v7</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Outrigger pads and crane mats: Section drawing: the ground pressure pill sits beside the pressure block when it does not fit inside</title>
    <link href="https://lu.ca/calc/outrigger/"/>
    <id>https://lu.ca/calc/outrigger/#v6</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Section drawing: the ground pressure pill sits beside the pressure block when it does not fit inside, the float width pill moves beside the outrigger beam on a crowded phone drawing, and the bearing-length dimension stays a whole line when its pill sits beside it</summary>
  </entry>
  <entry>
    <title>Ground anchors and soil nails: PNG and PDF export fixed</title>
    <link href="https://lu.ca/calc/groundanchor/"/>
    <id>https://lu.ca/calc/groundanchor/#v6</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>PNG and PDF export fixed: the “Terzaghi, Peck &amp; Mesri” in the report's source line is now escaped (an unescaped &amp; made the report SVG invalid, so the export produced nothing)</summary>
  </entry>
  <entry>
    <title>Base plate and anchor bolts: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/baseplate/"/>
    <id>https://lu.ca/calc/baseplate/#v6</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Hertz contact stress: PNG and PDF export fixed</title>
    <link href="https://lu.ca/calc/hertz/"/>
    <id>https://lu.ca/calc/hertz/#v6</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>PNG and PDF export fixed: the “Smith &amp; Liu, Hamrock &amp; Brewe” in the report's source line is now escaped (an unescaped &amp; made the report SVG invalid, so the export produced nothing)</summary>
  </entry>
  <entry>
    <title>Sling angles: Report export: “β &gt; 60°” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)</title>
    <link href="https://lu.ca/calc/sling/"/>
    <id>https://lu.ca/calc/sling/#v5</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Report export: “β &gt; 60°” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)</summary>
  </entry>
  <entry>
    <title>Fits and tolerances: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/fits/"/>
    <id>https://lu.ca/calc/fits/#v5</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Pipe supports and span: Formula steps: a unit with a micro sign or a superscript 3 closes its \text{} group and sets \mu or ^{3} in math mode</title>
    <link href="https://lu.ca/calc/pipesupport/"/>
    <id>https://lu.ca/calc/pipesupport/#v5</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: a unit with a micro sign or a superscript 3 closes its \text{} group and sets \mu or ^{3} in math mode; KaTeX drew \mu red and could not parse ^3 inside \text{}</summary>
  </entry>
  <entry>
    <title>Slope stability: PNG and PDF export fixed</title>
    <link href="https://lu.ca/calc/slope/"/>
    <id>https://lu.ca/calc/slope/#v5</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>PNG and PDF export fixed: the “Terzaghi, Peck &amp; Mesri” in the report's source line is now escaped (an unescaped &amp; made the report SVG invalid, so the export produced nothing)</summary>
  </entry>
  <entry>
    <title>Ground anchors and soil nails: The 0.1 % proof stress can be cleared again</title>
    <link href="https://lu.ca/calc/groundanchor/"/>
    <id>https://lu.ca/calc/groundanchor/#v5</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>The 0.1 % proof stress can be cleared again: an empty field means not set (it was rejected as invalid), and stays not set through the share link and the short link</summary>
  </entry>
  <entry>
    <title>Vibration isolation &amp; dampers: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/damper/"/>
    <id>https://lu.ca/calc/damper/#v5</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Lead and ball screws: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/screws/"/>
    <id>https://lu.ca/calc/screws/#v5</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Four-bar linkage: PNG and PDF export fixed</title>
    <link href="https://lu.ca/calc/linkage/"/>
    <id>https://lu.ca/calc/linkage/#v5</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>PNG and PDF export fixed: the drawing's pills carried a bare data-session attribute, which is invalid in the report SVG (XML), so the export produced nothing; now data-session=&quot;&quot;</summary>
  </entry>
  <entry>
    <title>Fatigue: Goodman and Haigh: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/fatigue/"/>
    <id>https://lu.ca/calc/fatigue/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Shear tab and end plate: The steel select has a narrower label beside it, so “S275 (fy 275, fu 430 MPa)” fits whole on a phone</title>
    <link href="https://lu.ca/calc/sheartab/"/>
    <id>https://lu.ca/calc/sheartab/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>The steel select has a narrower label beside it, so “S275 (fy 275, fu 430 MPa)” fits whole on a phone</summary>
  </entry>
  <entry>
    <title>Orifices and nozzles: Report export: “S &lt; 5 D” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)</title>
    <link href="https://lu.ca/calc/orifice/"/>
    <id>https://lu.ca/calc/orifice/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Report export: “S &lt; 5 D” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)</summary>
  </entry>
  <entry>
    <title>Pipe supports and span: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/pipesupport/"/>
    <id>https://lu.ca/calc/pipesupport/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Water hammer: PNG and PDF export fixed</title>
    <link href="https://lu.ca/calc/waterhammer/"/>
    <id>https://lu.ca/calc/waterhammer/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>PNG and PDF export fixed: the “Nakayama &amp; Boucher” in the report's source line is now escaped (an unescaped &amp; made the report SVG invalid, so the export produced nothing)</summary>
  </entry>
  <entry>
    <title>Ground anchors and soil nails: With no 0.1 % proof stress entered, the drawing footer shows P_t0,1k as &quot;not set&quot;</title>
    <link href="https://lu.ca/calc/groundanchor/"/>
    <id>https://lu.ca/calc/groundanchor/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>With no 0.1 % proof stress entered, the drawing footer shows P_t0,1k as &quot;not set&quot;, the margins table and report show &quot;—&quot; for the acceptance test's provided load, and the steps say the test limits are not set (they showed NaN)</summary>
  </entry>
  <entry>
    <title>Lead and ball screws: Screw materials are listed by standard and grade number without the chemical name, so the stainless grades fit the select on a phone</title>
    <link href="https://lu.ca/calc/screws/"/>
    <id>https://lu.ca/calc/screws/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Screw materials are listed by standard and grade number without the chemical name, so the stainless grades fit the select on a phone</summary>
  </entry>
  <entry>
    <title>Cams: PNG and PDF export fixed</title>
    <link href="https://lu.ca/calc/cam/"/>
    <id>https://lu.ca/calc/cam/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>PNG and PDF export fixed: the drawing's pills carried a bare data-session attribute, which is invalid in the report SVG (XML), so the export produced nothing; now data-session=&quot;&quot;</summary>
  </entry>
  <entry>
    <title>Four-bar linkage: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/linkage/"/>
    <id>https://lu.ca/calc/linkage/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Clutches and brakes: PNG and PDF export fixed</title>
    <link href="https://lu.ca/calc/clutch/"/>
    <id>https://lu.ca/calc/clutch/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>PNG and PDF export fixed: the “Khurmi &amp; Gupta” in the report's source line is now escaped (an unescaped &amp; made the report SVG invalid, so the export produced nothing)</summary>
  </entry>
  <entry>
    <title>Sheet and plate: gauges and tolerances: Stainless steel type B reads “Ni &gt; 20, Mo &gt; 2 or N &gt; 0.11 %”, short enough to show whole in the select</title>
    <link href="https://lu.ca/calc/sheet/"/>
    <id>https://lu.ca/calc/sheet/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Stainless steel type B reads “Ni &gt; 20, Mo &gt; 2 or N &gt; 0.11 %”, short enough to show whole in the select</summary>
  </entry>
  <entry>
    <title>PCB trace and via current: PNG and PDF export fixed</title>
    <link href="https://lu.ca/calc/pcbtrace/"/>
    <id>https://lu.ca/calc/pcbtrace/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>PNG and PDF export fixed: the “Brooks &amp; Adam” in the report's source line is now escaped (an unescaped &amp; made the report SVG invalid, so the export produced nothing)</summary>
  </entry>
  <entry>
    <title>Relief scenarios: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/relief/"/>
    <id>https://lu.ca/calc/relief/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Casing design: Report export: section names are escaped in the report's results column, so a name with &amp; or &lt; no longer breaks the PNG and PDF export</title>
    <link href="https://lu.ca/calc/casing/"/>
    <id>https://lu.ca/calc/casing/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Report export: section names are escaped in the report's results column, so a name with &amp; or &lt; no longer breaks the PNG and PDF export; an &amp; in the case name is no longer escaped twice in the check details</summary>
  </entry>
  <entry>
    <title>Haul truck fleet productivity: The road panel's loaded and empty segment speeds read the result of the previous road after a preset with a different number of segments</title>
    <link href="https://lu.ca/calc/haulfleet/"/>
    <id>https://lu.ca/calc/haulfleet/#v4</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>The road panel's loaded and empty segment speeds read the result of the previous road after a preset with a different number of segments (NaN km/h on the large-pit preset); the panel now reads the current result. The engine and every result are unchanged</summary>
  </entry>
  <entry>
    <title>Aluminium member design: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/aluminium/"/>
    <id>https://lu.ca/calc/aluminium/#v3</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Adhesive lap joints: The shear and peel peak pills stay inside the drawing on a phone</title>
    <link href="https://lu.ca/calc/adhesive/"/>
    <id>https://lu.ca/calc/adhesive/#v3</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>The shear and peel peak pills stay inside the drawing on a phone: slid in by their measured width, else placed above the peak, below the band or at the other end, never on a line or another label.</summary>
  </entry>
  <entry>
    <title>Spreader and lifting beams: Formula steps: the bending-range note (Lb ≤ Lp) inside \text{} sets ≤ in math</title>
    <link href="https://lu.ca/calc/spreader/"/>
    <id>https://lu.ca/calc/spreader/#v3</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: the bending-range note (Lb ≤ Lp) inside \text{} sets ≤ in math; KaTeX drew a red \le</summary>
  </entry>
  <entry>
    <title>Hydraulic pump and motor: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/hydpump/"/>
    <id>https://lu.ca/calc/hydpump/#v3</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Orifices and nozzles: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/orifice/"/>
    <id>https://lu.ca/calc/orifice/#v3</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Retaining wall stability: Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}</title>
    <link href="https://lu.ca/calc/retwall/"/>
    <id>https://lu.ca/calc/retwall/#v3</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Formula steps: units with a centred dot are set as \text{N}{\cdot}\text{m}; KaTeX has no text-mode &quot;·&quot; and drew a red \cdotp</summary>
  </entry>
  <entry>
    <title>Soil classification and compaction: PNG and PDF export fixed</title>
    <link href="https://lu.ca/calc/soilclass/"/>
    <id>https://lu.ca/calc/soilclass/#v3</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>PNG and PDF export fixed: the “Terzaghi, Peck &amp; Mesri” in the report's source line is now escaped (an unescaped &amp; made the report SVG invalid, so the export produced nothing)</summary>
  </entry>
  <entry>
    <title>Weirs and flumes: Report export: “H &lt; 0.5 Y” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)</title>
    <link href="https://lu.ca/calc/weir/"/>
    <id>https://lu.ca/calc/weir/#v3</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Report export: “H &lt; 0.5 Y” in the check details is no longer escaped twice (the report showed the entity code instead of the sign)</summary>
  </entry>
  <entry>
    <title>Heat exchanger: PNG and PDF export fixed</title>
    <link href="https://lu.ca/calc/hx/"/>
    <id>https://lu.ca/calc/hx/#v3</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>PNG and PDF export fixed: the “Lienhard &amp; Lienhard” in the report's source line is now escaped (an unescaped &amp; made the report SVG invalid, so the export produced nothing)</summary>
  </entry>
  <entry>
    <title>Room heat load: Plan: the room's dimension pills are placed before the heat-flow pills, which now also try beside the arrow nearer the wall</title>
    <link href="https://lu.ca/calc/heatload/"/>
    <id>https://lu.ca/calc/heatload/#v3</id>
    <updated>2026-11-07T00:00:00Z</updated>
    <summary>Plan: the room's dimension pills are placed before the heat-flow pills, which now also try beside the arrow nearer the wall, so a wall's watts no longer hide under the length</summary>
  </entry>
</feed>
