lu.ca/calc/Threads and tap drills/

R 4

Export

R 4 R, Rc, Rp (BSPT) thread

Major (gauge) diameter113.030 mm
Threads per inch11 (pitch 2.309 mm)
Thread angle55°, taper 1:16 on diameter
Thread height1.479 mm
External R (taper): Gauge diameter d (major at the gauge plane)113.030 mm
External R (taper): Pitch Ø d₂ at the gauge plane111.551 mm
External R (taper): Minor Ø d₁ at the gauge plane110.072 mm
External R (taper): Gauge length a21.900–28.900 mm
Internal Rc (taper): Gauge diameter D at the face113.030 mm
Internal Rc (taper): Pitch Ø D₂ at the face111.551 mm
Internal Rc (taper): Minor Ø D₁ at the face110.072 mm
Internal Rc (taper): Gauge plane position-3.500–3.500 mm

Computed from EN 10226-1/-2 (ISO 7-1); drills from ASME B94.11M. All threads