lu.ca/calc/Threads and tap drills/

R 3/8

Export

R 3/8 R, Rc, Rp (BSPT) thread

Major (gauge) diameter16.662 mm
Threads per inch19 (pitch 1.337 mm)
Thread angle55°, taper 1:16 on diameter
Thread height0.856 mm
External R (taper): Gauge diameter d (major at the gauge plane)16.662 mm
External R (taper): Pitch Ø d₂ at the gauge plane15.806 mm
External R (taper): Minor Ø d₁ at the gauge plane14.950 mm
External R (taper): Gauge length a5.100–7.700 mm
Internal Rc (taper): Gauge diameter D at the face16.662 mm
Internal Rc (taper): Pitch Ø D₂ at the face15.806 mm
Internal Rc (taper): Minor Ø D₁ at the face14.950 mm
Internal Rc (taper): Gauge plane position-1.700–1.700 mm

Computed from EN 10226-1/-2 (ISO 7-1); drills from ASME B94.11M. All threads