lu.ca/calc/Threads and tap drills/

R 3/4

Export

R 3/4 R, Rc, Rp (BSPT) thread

Major (gauge) diameter26.441 mm
Threads per inch14 (pitch 1.814 mm)
Thread angle55°, taper 1:16 on diameter
Thread height1.162 mm
External R (taper): Gauge diameter d (major at the gauge plane)26.441 mm
External R (taper): Pitch Ø d₂ at the gauge plane25.279 mm
External R (taper): Minor Ø d₁ at the gauge plane24.117 mm
External R (taper): Gauge length a7.700–11.300 mm
Internal Rc (taper): Gauge diameter D at the face26.441 mm
Internal Rc (taper): Pitch Ø D₂ at the face25.279 mm
Internal Rc (taper): Minor Ø D₁ at the face24.117 mm
Internal Rc (taper): Gauge plane position-2.300–2.300 mm

Computed from EN 10226-1/-2 (ISO 7-1); drills from ASME B94.11M. All threads