lu.ca/calc/Threads and tap drills/

R 2

Export

R 2 R, Rc, Rp (BSPT) thread

Major (gauge) diameter59.614 mm
Threads per inch11 (pitch 2.309 mm)
Thread angle55°, taper 1:16 on diameter
Thread height1.479 mm
External R (taper): Gauge diameter d (major at the gauge plane)59.614 mm
External R (taper): Pitch Ø d₂ at the gauge plane58.135 mm
External R (taper): Minor Ø d₁ at the gauge plane56.656 mm
External R (taper): Gauge length a13.600–18.200 mm
Internal Rc (taper): Gauge diameter D at the face59.614 mm
Internal Rc (taper): Pitch Ø D₂ at the face58.135 mm
Internal Rc (taper): Minor Ø D₁ at the face56.656 mm
Internal Rc (taper): Gauge plane position-2.900–2.900 mm

Computed from EN 10226-1/-2 (ISO 7-1); drills from ASME B94.11M. All threads