R 1 R, Rc, Rp (BSPT) thread
| Major (gauge) diameter | 33.249 mm |
| Threads per inch | 11 (pitch 2.309 mm) |
| Thread angle | 55°, taper 1:16 on diameter |
| Thread height | 1.479 mm |
| External R (taper): Gauge diameter d (major at the gauge plane) | 33.249 mm |
| External R (taper): Pitch Ø d₂ at the gauge plane | 31.770 mm |
| External R (taper): Minor Ø d₁ at the gauge plane | 30.291 mm |
| External R (taper): Gauge length a | 8.100–12.700 mm |
| Internal Rc (taper): Gauge diameter D at the face | 33.249 mm |
| Internal Rc (taper): Pitch Ø D₂ at the face | 31.770 mm |
| Internal Rc (taper): Minor Ø D₁ at the face | 30.291 mm |
| Internal Rc (taper): Gauge plane position | -2.900–2.900 mm |
Computed from EN 10226-1/-2 (ISO 7-1); drills from ASME B94.11M. All threads