lu.ca/calc/Threads and tap drills/

R 1/8

Export

R 1/8 R, Rc, Rp (BSPT) thread

Major (gauge) diameter9.728 mm
Threads per inch28 (pitch 0.907 mm)
Thread angle55°, taper 1:16 on diameter
Thread height0.581 mm
External R (taper): Gauge diameter d (major at the gauge plane)9.728 mm
External R (taper): Pitch Ø d₂ at the gauge plane9.147 mm
External R (taper): Minor Ø d₁ at the gauge plane8.566 mm
External R (taper): Gauge length a3.100–4.900 mm
Internal Rc (taper): Gauge diameter D at the face9.728 mm
Internal Rc (taper): Pitch Ø D₂ at the face9.147 mm
Internal Rc (taper): Minor Ø D₁ at the face8.566 mm
Internal Rc (taper): Gauge plane position-1.100–1.100 mm

Computed from EN 10226-1/-2 (ISO 7-1); drills from ASME B94.11M. All threads