lu.ca/calc/Threads and tap drills/

R 1/4

Export

R 1/4 R, Rc, Rp (BSPT) thread

Major (gauge) diameter13.157 mm
Threads per inch19 (pitch 1.337 mm)
Thread angle55°, taper 1:16 on diameter
Thread height0.856 mm
External R (taper): Gauge diameter d (major at the gauge plane)13.157 mm
External R (taper): Pitch Ø d₂ at the gauge plane12.301 mm
External R (taper): Minor Ø d₁ at the gauge plane11.445 mm
External R (taper): Gauge length a4.700–7.300 mm
Internal Rc (taper): Gauge diameter D at the face13.157 mm
Internal Rc (taper): Pitch Ø D₂ at the face12.301 mm
Internal Rc (taper): Minor Ø D₁ at the face11.445 mm
Internal Rc (taper): Gauge plane position-1.700–1.700 mm

Computed from EN 10226-1/-2 (ISO 7-1); drills from ASME B94.11M. All threads