lu.ca/calc/Threads and tap drills/

5 NPT

Export

5-8 NPT NPT thread

Pipe outside diameter5.563 in (141.30 mm)
Threads per inch8 (pitch 0.12500 in, 3.175 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.1000 in
External NPT: Pitch Ø at the pipe end, E₀5.3829–5.3985 in
External NPT: Pitch Ø at the hand-tight plane, E₁5.4415–5.4571 in
External NPT: Hand-tight engagement, L₁0.9370 in
External NPT: Effective thread, L₂1.4063 in
Internal NPT: Pitch Ø at the face, E₁5.4415–5.4571 in
Internal NPT: Hand-tight engagement, L₁0.9370 in
Internal NPT: Wrench make-up, L₃0.2500 in
Internal NPT: Pitch Ø at L₁ + L₃, E₃5.3751 in

Computed from ASME B1.20.1; drills from ASME B94.11M. All threads