lu.ca/calc/Threads and tap drills/

3 NPTF

Export

3-8 NPTF NPTF thread

Pipe outside diameter3.500 in (88.90 mm)
Threads per inch8 (pitch 0.12500 in, 3.175 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.1000 in
External NPTF-1: Pitch Ø at the pipe end, E₀3.3328–3.3484 in
External NPTF-1: Pitch Ø at the hand-tight plane, E₁3.3807–3.3963 in
External NPTF-1: Hand-tight engagement, L₁0.7660 in
External NPTF-1: Effective thread, L₂1.2000 in
Internal NPTF-1: Pitch Ø at the face, E₁3.3807–3.3963 in
Internal NPTF-1: Hand-tight engagement, L₁0.7660 in
Internal NPTF-1: Wrench make-up, L₃0.2500 in
Internal NPTF-1: Pitch Ø at L₁ + L₃, E₃3.3250 in

Computed from ANSI B1.20.3; drills from ASME B94.11M and ANSI B1.20.3 Table B1. All threads