lu.ca/calc/Threads and tap drills/

3/8 NPTF

Export

3/8-18 NPTF NPTF thread

Pipe outside diameter0.675 in (17.14 mm)
Threads per inch18 (pitch 0.05556 in, 1.411 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.0444 in
External NPTF-1: Pitch Ø at the pipe end, E₀0.6085–0.6155 in
External NPTF-1: Pitch Ø at the hand-tight plane, E₁0.6235–0.6305 in
External NPTF-1: Hand-tight engagement, L₁0.2400 in
External NPTF-1: Effective thread, L₂0.4078 in
Internal NPTF-1: Pitch Ø at the face, E₁0.6235–0.6305 in
Internal NPTF-1: Hand-tight engagement, L₁0.2400 in
Internal NPTF-1: Wrench make-up, L₃0.1667 in
Internal NPTF-1: Pitch Ø at L₁ + L₃, E₃0.6016 in

Computed from ANSI B1.20.3; drills from ASME B94.11M and ANSI B1.20.3 Table B1. All threads