lu.ca/calc/Threads and tap drills/

3/4 NPTF

Export

3/4-14 NPTF NPTF thread

Pipe outside diameter1.050 in (26.67 mm)
Threads per inch14 (pitch 0.07143 in, 1.814 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.0571 in
External NPTF-1: Pitch Ø at the pipe end, E₀0.9632–0.9721 in
External NPTF-1: Pitch Ø at the hand-tight plane, E₁0.9844–0.9933 in
External NPTF-1: Hand-tight engagement, L₁0.3390 in
External NPTF-1: Effective thread, L₂0.5457 in
Internal NPTF-1: Pitch Ø at the face, E₁0.9844–0.9933 in
Internal NPTF-1: Hand-tight engagement, L₁0.3390 in
Internal NPTF-1: Wrench make-up, L₃0.2143 in
Internal NPTF-1: Pitch Ø at L₁ + L₃, E₃0.9543 in

Computed from ANSI B1.20.3; drills from ASME B94.11M and ANSI B1.20.3 Table B1. All threads