lu.ca/calc/Threads and tap drills/

3-1/2 NPT

Export

3-1/2-8 NPT NPT thread

Pipe outside diameter4.000 in (101.60 mm)
Threads per inch8 (pitch 0.12500 in, 3.175 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.1000 in
External NPT: Pitch Ø at the pipe end, E₀3.8297–3.8453 in
External NPT: Pitch Ø at the hand-tight plane, E₁3.8810–3.8966 in
External NPT: Hand-tight engagement, L₁0.8210 in
External NPT: Effective thread, L₂1.2500 in
Internal NPT: Pitch Ø at the face, E₁3.8810–3.8966 in
Internal NPT: Hand-tight engagement, L₁0.8210 in
Internal NPT: Wrench make-up, L₃0.2500 in
Internal NPT: Pitch Ø at L₁ + L₃, E₃3.8219 in

Computed from ASME B1.20.1; drills from ASME B94.11M. All threads