2-11.5 NPTF NPTF thread
| Pipe outside diameter | 2.375 in (60.32 mm) |
| Threads per inch | 11.5 (pitch 0.08696 in, 2.209 mm) |
| Thread angle | 60°, taper 1:16 on diameter |
| Thread height | 0.0696 in |
| External NPTF-1: Pitch Ø at the pipe end, E₀ | 2.2636–2.2745 in |
| External NPTF-1: Pitch Ø at the hand-tight plane, E₁ | 2.2908–2.3017 in |
| External NPTF-1: Hand-tight engagement, L₁ | 0.4360 in |
| External NPTF-1: Effective thread, L₂ | 0.7565 in |
| Internal NPTF-1: Pitch Ø at the face, E₁ | 2.2908–2.3017 in |
| Internal NPTF-1: Hand-tight engagement, L₁ | 0.4360 in |
| Internal NPTF-1: Wrench make-up, L₃ | 0.2609 in |
| Internal NPTF-1: Pitch Ø at L₁ + L₃, E₃ | 2.2527 in |
Computed from ANSI B1.20.3; drills from ASME B94.11M and ANSI B1.20.3 Table B1. All threads