lu.ca/calc/Threads and tap drills/

2 NPT

Export

2-11.5 NPT NPT thread

Pipe outside diameter2.375 in (60.32 mm)
Threads per inch11.5 (pitch 0.08696 in, 2.209 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.0696 in
External NPT: Pitch Ø at the pipe end, E₀2.2636–2.2745 in
External NPT: Pitch Ø at the hand-tight plane, E₁2.2908–2.3017 in
External NPT: Hand-tight engagement, L₁0.4360 in
External NPT: Effective thread, L₂0.7565 in
Internal NPT: Pitch Ø at the face, E₁2.2908–2.3017 in
Internal NPT: Hand-tight engagement, L₁0.4360 in
Internal NPT: Wrench make-up, L₃0.2609 in
Internal NPT: Pitch Ø at L₁ + L₃, E₃2.2527 in

Computed from ASME B1.20.1; drills from ASME B94.11M. All threads