lu.ca/calc/Threads and tap drills/

2-1/2 NPT

Export

2-1/2-8 NPT NPT thread

Pipe outside diameter2.875 in (73.02 mm)
Threads per inch8 (pitch 0.12500 in, 3.175 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.1000 in
External NPT: Pitch Ø at the pipe end, E₀2.7117–2.7273 in
External NPT: Pitch Ø at the hand-tight plane, E₁2.7543–2.7700 in
External NPT: Hand-tight engagement, L₁0.6820 in
External NPT: Effective thread, L₂1.1375 in
Internal NPT: Pitch Ø at the face, E₁2.7543–2.7700 in
Internal NPT: Hand-tight engagement, L₁0.6820 in
Internal NPT: Wrench make-up, L₃0.2500 in
Internal NPT: Pitch Ø at L₁ + L₃, E₃2.7039 in

Computed from ASME B1.20.1; drills from ASME B94.11M. All threads