lu.ca/calc/Threads and tap drills/

10 NPT

Export

10-8 NPT NPT thread

Pipe outside diameter10.750 in (273.05 mm)
Threads per inch8 (pitch 0.12500 in, 3.175 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.1000 in
External NPT: Pitch Ø at the pipe end, E₀10.5375–10.5531 in
External NPT: Pitch Ø at the hand-tight plane, E₁10.6131–10.6288 in
External NPT: Hand-tight engagement, L₁1.2100 in
External NPT: Effective thread, L₂1.9250 in
Internal NPT: Pitch Ø at the face, E₁10.6131–10.6288 in
Internal NPT: Hand-tight engagement, L₁1.2100 in
Internal NPT: Wrench make-up, L₃0.2500 in
Internal NPT: Pitch Ø at L₁ + L₃, E₃10.5297 in

Computed from ASME B1.20.1; drills from ASME B94.11M. All threads