lu.ca/calc/Threads and tap drills/

1 NPTF

Export

1-11.5 NPTF NPTF thread

Pipe outside diameter1.315 in (33.40 mm)
Threads per inch11.5 (pitch 0.08696 in, 2.209 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.0696 in
External NPTF-1: Pitch Ø at the pipe end, E₀1.2082–1.2191 in
External NPTF-1: Pitch Ø at the hand-tight plane, E₁1.2332–1.2441 in
External NPTF-1: Hand-tight engagement, L₁0.4000 in
External NPTF-1: Effective thread, L₂0.6828 in
Internal NPTF-1: Pitch Ø at the face, E₁1.2332–1.2441 in
Internal NPTF-1: Hand-tight engagement, L₁0.4000 in
Internal NPTF-1: Wrench make-up, L₃0.2609 in
Internal NPTF-1: Pitch Ø at L₁ + L₃, E₃1.1973 in

Computed from ANSI B1.20.3; drills from ASME B94.11M and ANSI B1.20.3 Table B1. All threads