lu.ca/calc/Threads and tap drills/

1/8 NPTF

Export

1/8-27 NPTF NPTF thread

Pipe outside diameter0.405 in (10.29 mm)
Threads per inch27 (pitch 0.03704 in, 0.941 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.0296 in
External NPTF-1: Pitch Ø at the pipe end, E₀0.3612–0.3658 in
External NPTF-1: Pitch Ø at the hand-tight plane, E₁0.3713–0.3759 in
External NPTF-1: Hand-tight engagement, L₁0.1615 in
External NPTF-1: Effective thread, L₂0.2639 in
Internal NPTF-1: Pitch Ø at the face, E₁0.3713–0.3759 in
Internal NPTF-1: Hand-tight engagement, L₁0.1615 in
Internal NPTF-1: Wrench make-up, L₃0.1111 in
Internal NPTF-1: Pitch Ø at L₁ + L₃, E₃0.3566 in

Computed from ANSI B1.20.3; drills from ASME B94.11M and ANSI B1.20.3 Table B1. All threads