1/8-27 NPT NPT thread
| Pipe outside diameter | 0.405 in (10.29 mm) |
| Threads per inch | 27 (pitch 0.03704 in, 0.941 mm) |
| Thread angle | 60°, taper 1:16 on diameter |
| Thread height | 0.0296 in |
| External NPT: Pitch Ø at the pipe end, E₀ | 0.3612–0.3658 in |
| External NPT: Pitch Ø at the hand-tight plane, E₁ | 0.3713–0.3759 in |
| External NPT: Hand-tight engagement, L₁ | 0.1615 in |
| External NPT: Effective thread, L₂ | 0.2639 in |
| Internal NPT: Pitch Ø at the face, E₁ | 0.3713–0.3759 in |
| Internal NPT: Hand-tight engagement, L₁ | 0.1615 in |
| Internal NPT: Wrench make-up, L₃ | 0.1111 in |
| Internal NPT: Pitch Ø at L₁ + L₃, E₃ | 0.3566 in |
Computed from ASME B1.20.1; drills from ASME B94.11M. All threads