1/4-18 NPT NPT thread
| Pipe outside diameter | 0.540 in (13.72 mm) |
| Threads per inch | 18 (pitch 0.05556 in, 1.411 mm) |
| Thread angle | 60°, taper 1:16 on diameter |
| Thread height | 0.0444 in |
| External NPT: Pitch Ø at the pipe end, E₀ | 0.4739–0.4809 in |
| External NPT: Pitch Ø at the hand-tight plane, E₁ | 0.4882–0.4951 in |
| External NPT: Hand-tight engagement, L₁ | 0.2278 in |
| External NPT: Effective thread, L₂ | 0.4018 in |
| Internal NPT: Pitch Ø at the face, E₁ | 0.4882–0.4951 in |
| Internal NPT: Hand-tight engagement, L₁ | 0.2278 in |
| Internal NPT: Wrench make-up, L₃ | 0.1667 in |
| Internal NPT: Pitch Ø at L₁ + L₃, E₃ | 0.4670 in |
Computed from ASME B1.20.1; drills from ASME B94.11M. All threads