lu.ca/calc/Threads and tap drills/

1/2 NPTF

Export

1/2-14 NPTF NPTF thread

Pipe outside diameter0.840 in (21.34 mm)
Threads per inch14 (pitch 0.07143 in, 1.814 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.0571 in
External NPTF-1: Pitch Ø at the pipe end, E₀0.7540–0.7629 in
External NPTF-1: Pitch Ø at the hand-tight plane, E₁0.7740–0.7829 in
External NPTF-1: Hand-tight engagement, L₁0.3200 in
External NPTF-1: Effective thread, L₂0.5337 in
Internal NPTF-1: Pitch Ø at the face, E₁0.7740–0.7829 in
Internal NPTF-1: Hand-tight engagement, L₁0.3200 in
Internal NPTF-1: Wrench make-up, L₃0.2143 in
Internal NPTF-1: Pitch Ø at L₁ + L₃, E₃0.7450 in

Computed from ANSI B1.20.3; drills from ASME B94.11M and ANSI B1.20.3 Table B1. All threads