1/2-14 NPT NPT thread
| Pipe outside diameter | 0.840 in (21.34 mm) |
| Threads per inch | 14 (pitch 0.07143 in, 1.814 mm) |
| Thread angle | 60°, taper 1:16 on diameter |
| Thread height | 0.0571 in |
| External NPT: Pitch Ø at the pipe end, E₀ | 0.7540–0.7629 in |
| External NPT: Pitch Ø at the hand-tight plane, E₁ | 0.7740–0.7829 in |
| External NPT: Hand-tight engagement, L₁ | 0.3200 in |
| External NPT: Effective thread, L₂ | 0.5337 in |
| Internal NPT: Pitch Ø at the face, E₁ | 0.7740–0.7829 in |
| Internal NPT: Hand-tight engagement, L₁ | 0.3200 in |
| Internal NPT: Wrench make-up, L₃ | 0.2143 in |
| Internal NPT: Pitch Ø at L₁ + L₃, E₃ | 0.7450 in |
Computed from ASME B1.20.1; drills from ASME B94.11M. All threads