lu.ca/calc/Threads and tap drills/

1-1/4 NPTF

Export

1-1/4-11.5 NPTF NPTF thread

Pipe outside diameter1.660 in (42.16 mm)
Threads per inch11.5 (pitch 0.08696 in, 2.209 mm)
Thread angle60°, taper 1:16 on diameter
Thread height0.0696 in
External NPTF-1: Pitch Ø at the pipe end, E₀1.5517–1.5626 in
External NPTF-1: Pitch Ø at the hand-tight plane, E₁1.5779–1.5888 in
External NPTF-1: Hand-tight engagement, L₁0.4200 in
External NPTF-1: Effective thread, L₂0.7068 in
Internal NPTF-1: Pitch Ø at the face, E₁1.5779–1.5888 in
Internal NPTF-1: Hand-tight engagement, L₁0.4200 in
Internal NPTF-1: Wrench make-up, L₃0.2609 in
Internal NPTF-1: Pitch Ø at L₁ + L₃, E₃1.5408 in

Computed from ANSI B1.20.3; drills from ASME B94.11M and ANSI B1.20.3 Table B1. All threads