1-1/2-11.5 NPT NPT thread
| Pipe outside diameter | 1.900 in (48.26 mm) |
| Threads per inch | 11.5 (pitch 0.08696 in, 2.209 mm) |
| Thread angle | 60°, taper 1:16 on diameter |
| Thread height | 0.0696 in |
| External NPT: Pitch Ø at the pipe end, E₀ | 1.7907–1.8015 in |
| External NPT: Pitch Ø at the hand-tight plane, E₁ | 1.8169–1.8278 in |
| External NPT: Hand-tight engagement, L₁ | 0.4200 in |
| External NPT: Effective thread, L₂ | 0.7235 in |
| Internal NPT: Pitch Ø at the face, E₁ | 1.8169–1.8278 in |
| Internal NPT: Hand-tight engagement, L₁ | 0.4200 in |
| Internal NPT: Wrench make-up, L₃ | 0.2609 in |
| Internal NPT: Pitch Ø at L₁ + L₃, E₃ | 1.7798 in |
Computed from ASME B1.20.1; drills from ASME B94.11M. All threads